trinityboringsolutions.com

Opdyke West Texas Directional Boring: Acuff Loam, State Highway 114 and Rail Track

Quick Answer: The City of Opdyke West runs groundwater water lines, while Southwestern Public Service and three cooperatives report electric service in Hockley County, so we confirm line ownership before a bore near Texas State Highway 114. We take directional boring, also called horizontal directional drilling (HDD), under Texas State Highway 114 and along Barton Lane. Opdyke West is 379 road miles from our Yukon, Oklahoma main office, a distance that affects mobilization. Acuff soil is common here, and sandy clay loam below the surface can cling to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Opdyke West bores at a glance

  • Incorporated city in Hockley County, Texas. Population 234 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 379 miles, about 7.4 hours of driving.
  • Ground: Acuff soil is mapped on 59 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 114. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: Lubbock and Western Railway, with 1 mapped street and rail crossings.
  • Public water: City of Opdyke West, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Opdyke West near Texas State Highway 114?

The City of Opdyke West runs the public water system, and electric service is reported by utilities across Hockley County; confirming the owner before a bore helps us plan around existing lines. The Census Bureau Vintage 2024 estimate puts the town at 234 people. We install water, sewer, gas, electric conduit and fiber along routes such as Barton Lane or beneath Texas State Highway 114, with the line owner and route checked before drilling.

Our main office is in Yukon, Oklahoma, and Opdyke West work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record has no utility strike in over 25 years, which matters beside the City of Opdyke West groundwater lines and electric routes reported across Hockley County. The family business began in 1965 and has done directional boring since 1982, experience we bring to routes such as Texas State Highway 114.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is the ground like to bore in Opdyke West near Acuff soil?

The USDA soil survey maps Acuff loam across 59% of Opdyke West and Portales loam across 31%; Amarillo fine sandy loam accounts for 6%. At about 40 inches below the surface, the mapped texture is sandy clay loam across 65% of the area, loam across 31% and clay across 4%. Average clay content at that depth is 31%, while no sandy area is mapped there. Mapped soil patterns in Opdyke West guide our planning, but they are not test borings for a specific crossing. The clay in the sandy clay loam can stick to a reamer and grip pipe, so we plan the fluid and reaming around it.

USDA soil survey, inside the Opdyke West city limitsWhat is mapped
Soil series mappedAcuff 59 percent, Portales 31 percent, Amarillo 6 percent and Sparenberg 4 percent
Texture at the surfaceloam 90 percent, fine sandy loam 6 percent and clay 4 percent
Texture about 40 inches downsandy clay loam 65 percent, loam 31 percent and clay 4 percent
Engineering class about 40 inches downlean clay (CL) 96 percent and fat clay (CH) 4 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel4 percent of the area

Bedrock is not mapped in the top five feet of Opdyke West, which helps with shallow bore planning but does not rule out deeper rock. The USDA map shows the Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material; it also identifies Cenozoic sedimentary rocks of Paleocene age. No seasonal water table or flood prone soils are mapped. High steel corrosion risk covers 4% of the area, so the line owner should consider casing and tracer wire materials there; HDPE avoids that steel concern.

How is a bore run through Opdyke West sandy clay loam?

Acuff and Portales loams cover much of Opdyke West, while sandy clay loam is common about 40 inches down. We adjust drilling fluid and the reaming sequence to keep the hole workable without building excess pressure beneath pavement.

  1. Because sandy clay loam is mapped across 65% of Opdyke West at about 40 inches, we use a fluid mix suited to clay and stage the reaming to limit buildup on the tool.
  2. Acuff loam covers 59% of town, so we watch the returns and pull the pipe after the hole is prepared rather than leave clay to grip it.
  3. Before drilling near Barton Lane or another marked route, we expose each marked utility with hydrovac; paint shows its position, not its depth.
  4. As the bore advances beneath Texas State Highway 114, a walkover locator tracks the head and we log depth and pitch to check the planned path.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a line go under Texas State Highway 114 in Opdyke West?

Texas State Highway 114 runs for 2.5 mapped roadway miles inside Opdyke West, and FM 3261 is 0.9 miles outside the town limits. A utility route beneath the state highway needs a bore plan that accounts for the right of way and pavement. Barton Lane is the longest named street in town at 0.57 miles, followed by Mandy Circle at 0.36 miles and Lacey Lane at 0.23 miles. Those streets give a route planner specific places to check for existing lines and access to entry and exit pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 114State highway2.5 roadway miles insideState highway office
FM 3261Highway nearby0.9 miles outsideState highway office
Lubbock and Western RailwayRailroad0.62 track miles insideThe railroad
Swipe the table sideways to see every column.

The Lubbock and Western Railway has 0.62 track miles inside Opdyke West, with one mapped street and rail crossing. That junction makes track location and the railroad’s crossing conditions part of route planning. No streams are mapped inside or within one mile of town, and no lakes or ponds are mapped within one mile. With no mapped stream channel to cross, the main mapped crossing constraints here are the Texas State Highway 114 pavement and railway track.

Who approves a bore in Opdyke West and Hockley County?

For Texas State Highway 114, TxDOT owns the state highway right of way, and its Lubbock District reviews utility work there. The utility owner, not the drilling contractor, files the application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT requires a bore or tunnel beneath existing highway pavement, with rural highway crossings extending under all travel lanes. The Lubbock and Western Railway also requires its own crossing agreement. Because Opdyke West is incorporated, we treat its city streets as city owned when planning a boring route. No stream crossings are mapped here.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground in Opdyke West near the City of Opdyke West system?

The City of Opdyke West owns the public water system, which draws from groundwater wells and serves 220 people through 180 service connections. Electric service reported in Hockley County includes Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric Cooperative. Those county reports do not identify the provider at every address, so we confirm the line owner before planning a conduit bore near Barton Lane or another route.

Line ownerWhat it isSourceSize
City of Opdyke WestPublic water systemGroundwater wells180 connections, 220 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hockley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Opdyke West’s median housing year at 1997; 58% of homes date from 1960 to 1999 and 42% from 2000 or later. A route on Barton Lane may involve replacement pipe or a newer service, and age alone does not show what is buried. Before the drill approaches a marked line, we use hydrovac potholing to expose it and check its depth, since locate paint gives position but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Opdyke West and nearby Levelland?

Opdyke West is in Hockley County, at an elevation of 3,471 feet, and covers 0.22 square miles. ZIP code 79336 serves the town. Levelland, the county seat and nearest larger city, is 3.7 miles west; Smyer is 7.9 miles east, Whitharral is 10.2 miles north, Sundown is 14.4 miles southwest and Ropesville is 15.0 miles southeast. From our Yukon, Oklahoma main office, Opdyke West is 379 road miles away and a 7.4 hour drive, so distance is part of mobilization planning for a Texas State Highway 114 or Barton Lane job.

Places near Opdyke West

What boring work comes up in Opdyke West near Barton Lane?

  • Highway crossing: A bore beneath Texas State Highway 114 keeps the utility route below existing pavement instead of cutting through the highway.
  • Water service: A connection near Barton Lane must be planned around the City of Opdyke West groundwater system and marked service lines.
  • Rail crossing: A route beneath the Lubbock and Western Railway needs the railroad’s crossing agreement and its specified casing and depth conditions.
  • Street route: A line along Mandy Circle can be installed by bore to avoid opening the street pavement for the full route.
  • Fiber conduit: A conduit run near Lacey Lane needs the line owner confirmed and marked utilities exposed before drilling close to them.
  • Electric conduit: For a route near Texas State Highway 114, we confirm which Hockley County reported electric provider owns the line before laying out the bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Opdyke West near the Lubbock and Western Railway?

For a quote on a Barton Lane service or a Texas State Highway 114 crossing, send the address or map pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us understand the route, entry and exit pits, and the marked utilities that may affect the bore.

A short route on a clear section of Barton Lane may be simpler to plan than a crossing beneath Texas State Highway 114 or the Lubbock and Western Railway. Acuff soil and the sandy clay loam mapped below the surface affect drilling and reaming. We also account for pipe size, length, exposed utilities, pavement or concrete, pit and excavator work, sand backfill, and mobilization from Yukon. Creek crossings are not mapped in town, but drainage conditions at the actual route still inform the plan.

Questions people ask about boring in Opdyke West

Does Trinity take directional boring work in Opdyke West, Hockley County, and who staffs it?

Yes. We take directional boring work in Opdyke West, and our crews handle it with support from partner drilling contractors Trinity has vetted. For a planned crossing of Texas State Highway 114, we stay involved from the first call through the bore log, whichever crew is on site. For a route by Barton Lane, share the address and scope so we can plan access and line checks.

What ground should I expect for a bore through Acuff soil in Opdyke West?

The USDA soil survey maps Acuff loam across 59% of Opdyke West, with sandy clay loam covering 65% of the mapped area at about 40 inches. Clay can cling to the reamer and grip the pipe, so we plan fluid and reaming in stages. The survey describes mapped patterns, not conditions verified by a test boring at your Barton Lane address.

Will a directional bore in Opdyke West encounter rock along Texas State Highway 114?

Bedrock is not mapped in the top five feet of Opdyke West, but that does not rule out rock deeper down. The geologic map identifies the Blackwater Draw Formation, a Cenozoic unit, and Cenozoic sedimentary rocks of Paleocene age. We use the route and project information to plan the bore rather than assume the same depth conditions everywhere in town.

Who approves a bore beneath Texas State Highway 114 in Opdyke West before we plan the crossing?

TxDOT’s Lubbock District reviews utility work on Texas State Highway 114. The utility owner applies through TxDOT’s RULIS system, while we prepare the bore plan and profile for its application. TxDOT rules call for boring or tunneling beneath existing highway pavement, and the permit may set the required depth for the crossing.

What does a bore under the Lubbock and Western Railway in Opdyke West require?

A crossing beneath the Lubbock and Western Railway requires an agreement from the railroad that owns the track. That agreement sets crossing conditions such as casing, depth and flagging. The railway has 0.62 track miles inside Opdyke West, so we check the proposed route against the track before settling the bore plan.

Who runs Opdyke West’s public water system, and does it draw from groundwater wells near a planned bore?

The City of Opdyke West owns its public water system, which draws from groundwater wells, so we account for it when boring city streets. Public records list 180 service connections serving 220 people. If your proposed line runs near Barton Lane, we still check marked utilities along the actual route rather than relying on the water system’s service area alone.

Does being near Levelland change a bore job in Opdyke West?

Levelland is 3.7 miles west of Opdyke West, but our main office is in Yukon, Oklahoma, 379 road miles away. That distance can affect mobilization, along with the job’s length, pipe size, soil and crossings. For a route near Levelland or Barton Lane, an address or map pin helps us judge access and the scope.

How much notice does Texas811 need for a bore along Barton Lane in Opdyke West?

For a bore along Barton Lane, the excavator or project coordinator makes the Texas811 locate request and describes the planned route. Texas law requires at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and the request cannot be earlier than 14 days beforehand. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore beneath Texas State Highway 114 in Opdyke West?

The route and scope determine the price. A Texas State Highway 114 crossing may need more planning than a clear route on Barton Lane. Length, pipe or conduit size, Acuff soil, marked utilities to expose, pavement, pits, excavator time, sand backfill and mobilization from Yukon all affect the job. The proposed crossing and access points help us assess those factors.

Where the Opdyke West facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Opdyke West

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Opdyke West, Texas

Type the address of your job in Opdyke West. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Opdyke West

Same county: Anton. All counties: Texas county list.