trinityboringsolutions.com

Sundown Texas Directional Boring: Amarillo Soil, FM 303 and Slaughter Avenue

Quick Answer: Need a line beneath FM 303 without cutting the pavement? We do directional boring, also called horizontal directional drilling (HDD), for Sundown routes that cross this state highway. Sundown is 394 road miles from our Yukon, Oklahoma main office, so a Slaughter Avenue job needs mobilization planned around its route. Amarillo soil covers 69 percent of the city, and sandy clay loam below the surface can hold a bore, but sticky clay calls for careful reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sundown bores at a glance

  • Incorporated city in Hockley County, Texas. Population 1,306 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 394 miles, about 7.6 hours of driving.
  • Ground: Amarillo soil is mapped on 69 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 303 and FM 301. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Sundown, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring under FM 303 in Sundown?

Need a line under FM 303 without cutting the pavement? We take directional boring work in Sundown, Hockley County, for routes beneath streets such as Slaughter Avenue. At 1,306 residents, Sundown’s Census Bureau Vintage 2024 estimate helps us size underground utility planning around Slaughter Avenue. We install water, sewer, gas, electric conduit and fiber, with the route and line size shaping the bore plan for a Sundown street or highway crossing.

Our main office is in Yukon, Oklahoma, and Sundown work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; Sundown is 394 road miles from our Yukon main office. Our record of no utility strike in over 25 years matters around the City of Sundown water lines and electric infrastructure reported in Hockley County.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a Sundown bore meet in Amarillo soil?

The USDA soil survey maps Amarillo soil across 69 percent of Sundown, with fine sandy loam making up 79 percent of the mapped surface texture. About 40 inches below the surface, 87 percent of the mapped area is sandy clay loam, with an average clay content of 26 percent. That mix can hold the bore path, while clay can cling to a reamer and grip pipe. The survey also maps 7 percent of the area as sandy at that depth, where the hole may need support against sloughing. We treat Amarillo, Posey, Portales and Patricia as mapped soil patterns for Sundown, not as substitutes for test borings along a proposed route.

USDA soil survey, inside the Sundown city limitsWhat is mapped
Soil series mappedAmarillo 69 percent, Posey 10 percent, Portales 10 percent and Patricia 7 percent
Texture at the surfacefine sandy loam 79 percent, loam 11 percent and loamy fine sand 7 percent
Texture about 40 inches downsandy clay loam 87 percent and loam 10 percent
Engineering class about 40 inches downlean clay (CL) 80 percent and clayey sand (SC) 17 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel1 percent of the area

Along FM 303, the soil survey does not map bedrock within the top five feet, though that does not rule out deeper rock. The geologic map shows the Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material, and Cenozoic sedimentary rocks of Paleocene age. A seasonal water table is mapped in 1 percent of the area; pits there may need pumping. For Sundown in Hockley County, we treat flood prone soils as not mapped and avoid assuming that this alone establishes conditions along a bore route. High steel corrosion risk covers 1 percent, so the line owner should weigh casing and tracer wire materials; HDPE is not subject to that soil corrosion concern.

How do we plan a bore through Sundown’s sandy clay loam when the listed surface texture is fine sandy loam and soil series include Amarillo?

Sundown’s sandy clay loam at about 40 inches can hold a bore, but clay can build on the reamer. Along FM 303 or Slaughter Avenue, we adjust the drilling plan to the mapped ground and the crossing.

  1. With sandy clay loam mapped at about 40 inches, we use a drilling fluid suited to the clay and ream in stages so material does not pack onto the tool.
  2. Amarillo fine sandy loam covers much of Sundown’s surface, so we keep the pipe ready before the final ream where loose sand could cave behind the bit.
  3. For a route beneath FM 303, we track the drill head from the surface and log depth and pitch as it passes under the highway.
  4. If a seasonal water table affects a pit near Slaughter Avenue, we keep the excavation small and pump it as needed before continuing.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads does a Sundown bore cross near Slaughter Avenue?

FM 303 runs 1.5 mapped roadway miles inside Sundown, and FM 301 runs 1.3 miles. A bore beneath either state highway needs a route that clears pavement without an open cut. Slaughter Avenue is the longest named street in the city at 1.48 miles, followed by York Avenue at 1.3 miles and School Avenue at 1.17 miles. Those streets can shape where entry and exit pits fit. A walkover locator tracks the drill head as it advances, so depth and pitch can be checked on the way beneath a Sundown roadway.

CrossingTypeMapped extentWho has a say
FM 303State highway1.5 roadway miles insideState highway office
FM 301State highway1.3 roadway miles insideState highway office
Swipe the table sideways to see every column.

Public records map no railroad inside Sundown or within one mile outside its limits, so there is no local track route identified for a rail crossing. No lakes or ponds are mapped within one mile, and no named streams or street crossings of streams are mapped in the city. For a proposed route near Veal Avenue, the plans still need to match the actual site. Where a marked utility lies on the path, we expose it before the drill approaches.

Who approves a Sundown bore in Hockley County?

FM 303 and FM 301 are state highways, so a bore in their right of way goes to the Texas Department of Transportation. The TxDOT Lubbock District reviews the utility permit. The utility that owns the line submits the application through RULIS, while we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit sets the required cover. Sundown is incorporated, so its city streets, including Slaughter Avenue, belong to the city itself. No railroad or named water crossing is mapped in the city to identify for this route.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Sundown water system?

The City of Sundown public water system uses groundwater wells and reports 680 service connections serving 1,300 people. That makes existing water lines a practical consideration for a new service bore along York Avenue. EIA records report Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric Cooperative as serving Hockley County. Those records do not identify the electric provider at every Sundown address, so the line owner must be identified before an electric conduit route is planned.

Line ownerWhat it isSourceSize
City of SundownPublic water systemGroundwater wells680 connections, 1,300 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hockley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sundown’s median housing year at 1983; 17 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 17 percent in 2000 or later. That mix can mean either replacement work or a new service along Slaughter Avenue. Along FM 303, we hydrovac pothole every marked utility on the bore path before drilling near it. For example, a line planned beneath Slaughter Avenue needs marked utilities exposed first, since paint shows position but not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Sundown and nearby Levelland?

Sundown is an incorporated city in Hockley County, with 1.52 square miles of land at an elevation of 3,539 feet. When we plan underground work in Sundown, we check whether the address uses ZIP code 79372 or 79336 before locating the bore. Levelland, the county seat and nearest larger city, is 11.3 miles northeast; Whiteface is 12.1 miles northwest, and Opdyke West is 14.4 miles northeast. Sundown is 394 road miles and a 7.6 hour drive from our Yukon, Oklahoma yard. We serve Oklahoma and Texas, and that distance is part of planning a bore near FM 303.

Places near Sundown

What boring work comes up on York Avenue in Sundown?

  • Highway crossing: A route beneath FM 303 needs pits outside the pavement and a bore plan for the TxDOT right of way.
  • Water service: A new connection near York Avenue can be routed around existing City of Sundown water lines after marked utilities are exposed.
  • Fiber conduit: A bore along Slaughter Avenue can carry fiber beneath pavement without cutting the street surface.
  • Electric conduit: Before planning a route near School Avenue, identify the provider for that address among the utilities reported in Hockley County.
  • Sewer line: A sewer route near Veal Avenue can be planned as a bore where the line needs to pass beneath a street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Sundown bore near Veal Avenue?

A map pin matters near Veal Avenue because the exact route shows whether the bore meets pavement, existing lines or a highway right of way. For a proposed crossing near York Avenue, send us the address or pin, underground material, pipe or conduit size, and footage so we can scope the bore. A sketch or plans for a route near FM 303 also help us set the scope.

A direct route near Veal Avenue with clear plans is simpler to lay out; a crossing beneath FM 303 needs more permit and profile planning. The price depends on footage, pipe size, the Amarillo soil, utilities that must be crossed and exposed, pavement, pits and excavator time. Creek or drainage crossings can add work, though none are mapped in Sundown. Mobilization also matters because the Yukon yard is 394 road miles away.

Questions people ask about boring in Sundown

Does Trinity take directional boring work in Sundown and Hockley County?

Yes. We take directional boring jobs in Sundown, Hockley County, and staff them with our own crews or crews from partner drilling contractors we have vetted. Your contact stays with Trinity from the first call through the bore log, including a route under FM 303.

What ground should I expect on a Sundown bore through Amarillo soil?

The USDA soil survey maps Amarillo soil across 69 percent of Sundown. About 40 inches down, sandy clay loam covers 87 percent of the mapped area, with 26 percent average clay content. That clay can grip the pipe or build on the reamer, so staged reaming and a fluid plan matter for a route near Slaughter Avenue.

Can we determine whether a directional bore in Sundown will hit rock along FM 301 without site specific information?

The soil survey does not map bedrock in the top five feet of Sundown, but that does not rule out rock deeper down. The geologic map shows the Blackwater Draw Formation and Cenozoic sedimentary rocks of Paleocene age. A bore near FM 301 still needs its depth and ground checked for the actual route.

Who approves a utility bore beneath FM 303 in Sundown?

TxDOT reviews work in the FM 303 right of way through its Lubbock District. The utility owner files the application in RULIS, and we prepare the bore plan and profile for that filing. A bore beneath existing FM 303 pavement is installed by boring or tunneling under TxDOT rules.

In Hockley County, can we confirm who runs Sundown’s public water system and where its water comes from before planning a bore?

The City of Sundown owns and operates the public water system, which draws from groundwater wells. Public records list 680 service connections and 1,300 people served in Sundown, figures we use as context when planning underground utility work on School Avenue. For a new line near York Avenue, we need to locate and expose marked utilities before drilling close to existing water infrastructure.

Which electric providers should I check for a Sundown address in Hockley County?

County records report Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric Cooperative. They do not show which provider serves every address in Sundown. Identify the owner for the specific route before planning an electric conduit bore near FM 303.

Does Sundown’s distance from Levelland affect a bore crew coming from Yukon?

Levelland is 11.3 miles northeast of Sundown, while the Yukon yard is 394 road miles away and a 7.6 hour drive. That distance affects mobilization planning for a job near Slaughter Avenue. Route length, equipment needs and the requested schedule also shape the work plan.

How much Texas811 notice does a bore on Slaughter Avenue in Sundown need?

For a Slaughter Avenue bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Sundown start near Veal Avenue slips more than 14 days past the original notice, we submit a new request. Before work continues near Richardson Street, we have worn or moved utility marks refreshed through Texas811.

What affects the cost of a directional bore under FM 303 in Sundown?

The FM 303 route, footage, pipe or conduit size and Amarillo soil all affect the scope. The number of utilities to expose, pavement, pit work and excavator time matter too. Sundown’s 394 road miles from Yukon affect mobilization, and an emergency schedule or a drainage crossing can add planning demands.

Where the Sundown facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sundown

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sundown, Texas

Type the address of your job in Sundown. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sundown

Same county: Anton · Smyer · Whitharral. All counties: Texas county list.