Browndell Texas Directional Boring: Mantachie Soil, Mill Creek and US 96
Quick Answer: The City of Browndell runs the groundwater system, while several electric providers report service in Jasper County, so we identify the line owners before a bore near Mill Creek. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes crossing US 96. Browndell is 453 road miles from our Yukon, Oklahoma main office, a distance that affects mobilization for work near Circle Drive. Mantachie soil is common here, and clay mapped below the surface can grip the pipe during a pull.
Browndell bores at a glance
- Incorporated city in Jasper County, Texas. Population 156 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 453 miles, about 8.9 hours of driving.
- Ground: Mantachie soil is mapped on 23 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 38 percent of the area.
- Highways inside the boundary: US 96 and FM 1007. State permit office: TxDOT Beaumont District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Mill Creek.
- Public water: City of Browndell, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Mill Creek in Browndell?
The City of Browndell owns the public water system, and electric providers reporting service in Jasper County include Entergy Texas and three cooperatives. We confirm the owner of a specific line before planning a bore. The Census Bureau Vintage 2024 estimate puts Browndell at 156 people. Along US 96 or Church Street, we can install water, sewer, gas, electric conduit or fiber without cutting the route surface.
Our main office is in Yukon, Oklahoma, and Browndell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A Church Street service could be as small as a 3/4 inch line, while a crossing under US 96 may call for casing up to 48 inches. Our family business started in 1965 and has done directional boring since 1982, including work sized for routes like these.

What is Mantachie soil like to bore in Browndell?
The USDA soil survey maps Mantachie soil across 23 percent of Browndell. Fine sandy loam covers 47 percent of the mapped area, and loamy sand covers 29 percent at the surface. About 40 inches down, clay is mapped under 26 percent of the area, with sandy clay loam under 19 percent. The mapped clay share can make a reamer sticky and let the soil grip pipe. These are soil survey patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Browndell city limits | What is mapped |
|---|---|
| Soil series mapped | Mantachie 23 percent, Rayburn 19 percent, Letney 19 percent, Tehran 10 percent and Iuka 10 percent |
| Texture at the surface | fine sandy loam 47 percent, loamy sand 29 percent and loam 24 percent |
| Texture about 40 inches down | clay 26 percent, loam 23 percent and sandy clay loam 19 percent |
| Engineering class about 40 inches down | fat clay (CH) 26 percent, lean clay (CL) 23 percent and clayey sand (SC) 19 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | 38 percent of the area (0 percent hard rock, 38 percent weathered rock) |
| Seasonal water table within 60 inches | 63 percent of the area |
| Flood prone soils | 33 percent of the area |
| High corrosion risk for uncoated steel | 71 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 38 percent of Browndell, mostly weathered; bedrock is mapped within 40 inches across 12 percent. Hard bedrock is not mapped within 60 inches. A seasonal water table is mapped within 60 inches across 63 percent, and flood prone soils cover 33 percent, so pits near Mill Creek may need pumping and depth planning. High steel corrosion risk covers 71 percent. The Holocene Alluvial Gravelly Sand map unit includes sand, clay, gravel and silt, which can change how the hole holds.
How do we drill through clay in Browndell?
Mantachie soil and clay mapped below the surface call for a plan that controls the hole and keeps the pull moving. We check the route near Mill Creek before choosing the reaming sequence.
- Where clay is mapped about 40 inches down, we use staged reaming and manage the drilling fluid so sticky soil does not bind the pipe.
- The loamy sand mapped at Browndell’s surface can fall behind the bit, so we stabilize the bore and have the pipe ready before the final ream.
- Seasonal water is mapped within 60 inches across 63 percent of the city; near Mill Creek, we plan pits that can be managed if water enters.
- Before drilling near US 96 or a City of Browndell water line, we hydrovac expose marked utilities and track the drill head from the surface.

Which roads, tracks or creeks could a Browndell bore cross near Circle Drive?
US 96 and FM 1007 run inside Browndell, while Loop 149 touches or follows the city limits and Spur 165 is 0.8 miles away. Circle Drive is the longest named street at 1.28 miles in the city, followed by Church Street at 1.21 miles and Johnson Street at 0.31 miles. These routes can put a bore near pavement and existing services. Boring beneath an existing highway keeps the surface intact, but the route and required cover still need to match the road and utility.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 96 | US highway | 1.4 roadway miles inside | State highway office |
| FM 1007 | State highway | 1 roadway miles inside | State highway office |
| Loop 149 | Highway nearby | Runs along or touches the city limits | State highway office |
| Spur 165 | Highway nearby | 0.8 miles outside | State highway office |
| BNSF Railway | Railroad nearby | 0 miles outside | The railroad |
| Mill Creek | Stream | 2.73 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Johnson Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Sam Rayburn Reservoir | Lake or pond | 5,537 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad track is mapped inside Browndell, but BNSF Railway runs along or touches the boundary. No street and rail crossings are mapped in the city, so a proposed rail route needs to be checked against the actual track alignment. Mill Creek has 2.73 channel miles inside the limits, and three mapped street crossings of named streams make creek locations part of route planning. Sam Rayburn Reservoir is within one mile but outside the city.
Whose permission does a bore need in Browndell and Jasper County?
Browndell is incorporated, so work on city streets such as Circle Drive belongs to the city; we do not assume an unlisted form or local rule. For work in the right of way of US 96, FM 1007, Loop 149 or Spur 165, the utility owner files the TxDOT utility permit in the online RULIS system. The TxDOT Beaumont District reviews it. For a bore tied to Browndell’s public water system, we send the utility owner the bore plan and profile and work under its permit. TxDOT cover rules include 60 inches at highway crossings for electric, communication and water lines, and 48 inches for electric and communication lines running along the right of way.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Browndell water system?
The City of Browndell public water system uses groundwater wells and reports 115 service connections serving 262 people. That makes water lines a key locate to check before a route near Circle Drive or Mill Creek. Electric service reported in Jasper County includes Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. The specific electric line owner must be confirmed before planning a conduit bore; the county list does not identify the provider at every Browndell address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Browndell | Public water system | Groundwater wells | 115 connections, 262 people served |
| Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Jasper County | EIA Form 861 | Confirm the line owner by address |
Browndell’s median housing year is 1997 in the American Community Survey 2019 to 2023 five year estimates, a context point for underground work. Fourteen percent of homes were built before 1960, 42 percent from 1960 to 1999 and 44 percent in 2000 or later. A route on Church Street could serve a replacement line or a newer connection, and age alone does not show what is buried. We hydrovac expose marked utilities along the planned bore path because paint shows position, not depth.

Where is Browndell in relation to Pineland and Jasper?
Browndell is in Jasper County, covers 2.44 square miles and sits at an elevation of 226 feet. Its ZIP code is 75931. Sam Rayburn is 4.3 miles southwest, Pineland is 8.4 miles north, and Jasper is 14.0 miles south. Jasper is both the county seat and the nearest larger city. From our Yukon, Oklahoma main office, the road route is 453 miles and the drive is 8.9 hours. That distance matters when planning equipment and crew mobilization for a bore near US 96.
Places near Browndell
- Directional boring in Sam Rayburn: 4.3 miles southwest
- Directional boring in Pineland: 8.4 miles north
- Directional boring in Jasper: 14 miles south
- Directional boring in Hemphill: 16.9 miles northeast
- Directional boring in Broaddus: 21.2 miles northwest
What boring work comes up near Church Street in Browndell?
- Highway crossing: A route beneath US 96 needs a planned bore under the pavement, with the utility owner handling the TxDOT permit.
- Water service: A connection near the City of Browndell system needs the existing groundwater line located before we drill.
- Fiber route: A conduit bore along Church Street can keep the sidewalk and pavement surface uncut.
- Creek crossing: A Mill Creek route needs depth planning for the channel and a check for federal waterway jurisdiction.
- Rail crossing: A proposed route by the BNSF Railway boundary needs the railroad’s crossing agreement before the track is crossed.
- Street service: A line near Circle Drive can be bored between pits, avoiding an open cut across the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Browndell bore near BNSF Railway?
For a route near Church Street, send the address or map pin first. Tell us what goes underground, such as water near the City of Browndell system or fiber along US 96. Give the pipe or conduit size and the footage. A sketch or plans showing Mill Creek, pavement or nearby utilities help us scope the route.
In Browndell, ground conditions come first: clay below the surface can affect reaming and pipe pull, while Mantachie soil and wet ground near Mill Creek may change the plan. Price also reflects bore length and line size, the utilities to expose, and pavement or concrete on Circle Drive. A creek crossing or BNSF Railway route adds planning needs. Pits, excavator time, sand backfill, emergency timing and the 453 road miles from Yukon can also affect mobilization and scope.
Questions people ask about boring in Browndell
Does Trinity Boring Solutions take directional boring work in Browndell and Jasper County?
Yes. We take directional boring work in Browndell and across Texas, with our own crews and partner drilling contractors vetted by Trinity. From the first call through the bore log, we coordinate with whichever crew is on site for work involving Browndell’s public water system. For a route near Mill Creek, we plan the work around the crossing and the line owners.
How much rock is mapped near the surface in Browndell?
The USDA soil survey maps bedrock within 60 inches across 38 percent of Browndell, with weathered bedrock represented there. Bedrock is mapped within 40 inches across 12 percent. Hard bedrock is not mapped within 60 inches, but a route near Mantachie soil still needs field assessment because mapped patterns do not replace site checks.
For a crossing under US 96 in Browndell, who approves the bore before we set the work plan?
The line owner applies for the TxDOT utility permit when work is in the US 96 right of way; the contractor does not file it. The TxDOT Beaumont District reviews the application in RULIS. We prepare the bore plan and profile for the utility owner, and the permit sets the approved crossing conditions.
What does a Browndell bore beneath BNSF Railway require?
A crossing beneath BNSF Railway requires an agreement from the railroad that owns the track. The agreement sets requirements such as casing, depth and flagging. BNSF Railway runs along or touches Browndell’s boundary, so the proposed alignment has to be checked against the track before a crossing plan is prepared.
Can a line be bored under Mill Creek in Browndell?
Yes, a bore can be planned beneath Mill Creek, which has 2.73 channel miles inside Browndell. We plan the depth to stay below the channel and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The route and bank conditions help determine the bore plan.
For Browndell, who runs the public water system, and where does its water come from?
The City of Browndell owns its public water system, which draws from groundwater wells we account for when planning underground work. The system reports 115 service connections serving 262 people. We identify and expose marked water lines near a proposed route, such as one along Circle Drive, before the drill approaches.
How much 811 notice is needed for a bore on Circle Drive in Browndell?
Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Circle Drive start slips more than 14 days past the original notice, submit a new request. Before work continues in Browndell, we refresh worn or moved marks through Texas811 to keep the bore plan aligned.
Does Browndell’s distance from Jasper change a job from the Yukon office?
Browndell is 453 road miles and an 8.9 hour drive from our Yukon, Oklahoma main office. That distance can affect mobilization planning for a bore near Jasper or US 96. We review the route, equipment needs and job scope before scheduling crews.
What affects the cost of directional boring under US 96 in Browndell?
The price depends on the job details, not a single standard rate. For US 96, we consider bore length, pipe or conduit size, the clay mapped below the surface, and how many utilities need exposure. Pavement, pits, creek crossings such as Mill Creek, emergency timing and mobilization from Yukon also affect the scope.
Where the Browndell facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Browndell
- U.S. Census Bureau, TIGER/Line 2024: Browndell boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Browndell
- U.S. Census Bureau, American Community Survey 2019 to 2023: Browndell housing units and year built
- Macrostrat geologic map compilation: map units under Browndell
- U.S. EPA Safe Drinking Water Information System: public water systems serving Browndell
- U.S. Department of Transportation, North American Rail Network: track owners in Jasper County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jasper County
- U.S. Geological Survey, Elevation Point Query Service: Browndell elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Browndell
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Browndell
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Browndell, Texas
Type the address of your job in Browndell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Browndell
Same county: Buna · Kirbyville · Evadale. All counties: Texas county list.
