trinityboringsolutions.com

Jasper Texas Directional Boring: Woodville Soil, Sandy Creek and BNSF Railway

Quick Answer: The City of Jasper runs the groundwater water system and owns the electric system, so we identify those lines before planning work along Gibson Street. We handle directional boring, also called horizontal directional drilling (HDD), for routes that must pass under BNSF Railway in Jasper. The city is 467 road miles from our Yukon, Oklahoma main office, and US 190 is one route where access and crossings shape the plan. Woodville soil is common here, and clay mapped below the surface can stick to the reamer and grip the pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Jasper bores at a glance

  • County seat of Jasper County, Texas. Population 7,505 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 467 miles, about 9.2 hours of driving.
  • Ground: Woodville soil is mapped on 35 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 190, US 96, Texas State Highway 63, FM 2799 and FM 777. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Sandy Creek, Trotti Creek, Coon Creek and Big Walnut Run.
  • Public water: City of Jasper, groundwater wells.
  • Electric: City of Jasper municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near BNSF Railway in Jasper?

The City of Jasper owns the electric system, and its public water system uses groundwater wells, so we locate and identify those lines before a new bore. Jasper is the Jasper County seat, with a population of 7,505 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber on routes such as Gibson Street, where the path must be planned around existing services.

Our main office is in Yukon, Oklahoma, and Jasper work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. Our 3/4 inch service line to 48 inch casing range fits Jasper work from a small Gibson Street connection to a larger crossing near BNSF Railway.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Woodville soil survey show about Jasper ground?

The USDA soil survey maps Woodville soil across 35 percent of Jasper, including the Woodville Redco association, gently undulating. Surface material is often fine sandy loam, while the mapped texture at about 40 inches includes clay across 46 percent of the area and sandy clay loam across 33 percent. For Jasper, we treat mapped soil patterns as planning context, not test borings, before setting our boring approach. The clay share matters because sticky cuttings can collect on a reamer, while the sandy surface may loosen if drilling fluid is pushed too hard.

USDA soil survey, inside the Jasper city limitsWhat is mapped
Soil series mappedWoodville 35 percent, Doucette 16 percent, Letney 9 percent, Tehran 9 percent and Redco 7 percent
Texture at the surfacefine sandy loam 46 percent, loamy fine sand 22 percent and loamy sand 19 percent
Texture about 40 inches downclay 46 percent, sandy clay loam 33 percent and loamy sand 9 percent
Engineering class about 40 inches downfat clay (CH) 46 percent, clayey sand (SC) 25 percent and silty sand (SM) 15 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches7 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel52 percent of the area

Bedrock is not mapped in the top five feet in Jasper, which does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 7 percent and flood prone soils across 7 percent, so pits near Sandy Creek need attention to water and channel depth. High steel corrosion risk is mapped across 52 percent, a concern for uncoated steel casing and tracer wire. The mapped Fleming Formation is Miocene age and includes clay and sandstone, so deeper material can differ from the surface soils.

What does it take for us to bore Jasper clay beneath US 190?

Jasper has clay mapped beneath much of its sandy surface, including around routes serving US 190. We plan the fluid, reaming sequence and pullback around that change in ground, then track the drill head as it advances.

  1. With clay mapped at about 40 inches across 46 percent of Jasper, we use a thinner fluid mix and staged reaming to limit sticky buildup on the reamer.
  2. Where the Woodville soil surface is sandy, we build a stabilizing fluid wall and have the pipe ready before the final ream to reduce the time an open hole can cave.
  3. Near pavement on US 190, we watch fluid returns and keep pressure controlled so heavy clay does not lift the roadway.
  4. For a route near Sandy Creek, we plan pits for possible water and track the drill head from the surface, logging its depth and pitch.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross near Sandy Creek in Jasper?

US 190 and US 96 each have more than nine mapped roadway miles within Jasper, and Texas State Highway 63 also runs through the city. FM 2799, FM 777, FM 252, FM 2800 and FM 776 are additional state roads to check when a route reaches their right of way. Among local streets, Gibson Street runs 7.31 miles, Wheeler Street 5.27 miles and Bevil Loop 2.61 miles. Bowie Street and Houston Street are also long routes where existing pavement and utilities affect bore placement.

CrossingTypeMapped extentWho has a say
US 190US highway9.4 roadway miles insideState highway office
US 96US highway9.3 roadway miles insideState highway office
Texas State Highway 63State highway6.4 roadway miles insideState highway office
FM 2799State highway2.2 roadway miles insideState highway office
FM 777State highway1.4 roadway miles insideState highway office
FM 252State highway0.5 roadway miles insideState highway office
FM 2800State highway0.4 roadway miles insideState highway office
FM 776State highway0.4 roadway miles insideState highway office
BNSF RailwayRailroad2.55 track miles insideThe railroad
Sandy CreekStream3.03 channel miles insideChecked for Corps of Engineers jurisdiction
Trotti CreekStream1.88 channel miles insideChecked for Corps of Engineers jurisdiction
Coon CreekStream1.88 channel miles insideChecked for Corps of Engineers jurisdiction
Big Walnut RunStream1.65 channel miles insideChecked for Corps of Engineers jurisdiction
Blue Spring BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 2.55 track miles in Jasper on its Longview Subdivision, and public mapping shows 3 street and rail crossings in the city. A crossing under that track needs the railroad’s agreement, which sets the crossing conditions. Sandy Creek runs 3.03 channel miles here, alongside Trotti Creek, Coon Creek and Big Walnut Run. Public mapping shows 14 street crossings of named streams, so a route near a creek needs a channel crossing plan. With no lakes or ponds mapped within one mile of Jasper, we can focus route review on mapped crossing conditions.

Do I need a permit to bore in Jasper County?

For a bore on US 190, US 96, Texas State Highway 63 or a farm to market road, TxDOT handles the right of way permit through its Beaumont District. The utility owner submits the application in the online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. Jasper is incorporated, so city streets such as Wheeler Street belong to the city. A bore under BNSF Railway needs the railroad’s agreement, and TxDOT asks for a copy when the crossing also uses highway right of way. A Sandy Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are already in the ground near the City of Jasper system?

The City of Jasper public water system uses groundwater wells and reports 4,051 service connections serving 9,884 people. Because Jasper owns its municipal electric system, we account for city utility coordination when planning a bore. Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative report electric service in Jasper County, but those reports do not identify the provider at every address. We confirm the line owner before planning a conduit bore along Gibson Street or another route.

Line ownerWhat it isSourceSize
City of JasperPublic water systemGroundwater wells4,051 connections, 9,884 people served
City of Jasper municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration4,487 customers reported
Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric CooperativeElectric utilities reporting service in Jasper CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Jasper’s median housing year at 1981; 12 percent of homes were built before 1960, 73 percent from 1960 to 1999 and 15 percent in 2000 or later. That mix can mean both replacement work and new service routes. Before drilling near marked utilities on Jasper’s bore path, we hydrovac pothole each one to verify its position. For example, a marked line beneath Gibson Street gets exposed before the drill approaches, since locate paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Jasper and nearby Browndell?

Jasper is an incorporated city and the county seat of Jasper County, at an elevation of 209 feet and covering 10.45 square miles. For work serving Jasper in ZIP code 75951, we include the location when coordinating underground access and project details. Sam Rayburn is 10.9 miles north, Browndell is 14.0 miles north, Newton is 15.0 miles east, Kirbyville is 19.1 miles south and Pineland is 22.4 miles north. Our Yukon, Oklahoma yard is 467 road miles away, about a 9.2 hour drive, so that distance is part of planning mobilization for work near US 190 or rural sites beyond the city.

Places near Jasper

What kinds of bores come up near Wheeler Street in Jasper?

  • Highway crossing: A bore beneath US 190 can keep the roadway intact while the route passes under its travel lanes.
  • Water service: A connection near the City of Jasper groundwater system has to be laid out around existing water lines and service routes.
  • Fiber conduit: Along Gibson Street, a fiber route needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A route under Sandy Creek needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A bore under BNSF Railway needs an agreement with the track owner before the crossing plan is set.
  • Street connection: A service bore along Wheeler Street can pass below pavement while pits sit in the dirt on each side.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Jasper bore near Bowie Street?

Start with a map pin, because the exact spot on Bowie Street or near Sandy Creek shows which pavement, utilities and crossing conditions the bore must deal with. For a Jasper bore, tell us what is going in the ground, plus pipe or conduit size and footage, so we can scope the installation. A sketch or plans help us see the route and work area before we set the scope.

A short, open route through accessible sandy surface soil can be simpler to plan than a bore through Jasper’s clay or beneath BNSF Railway. Length, pipe size, soil, utility crossings, pavement, creek crossings, pits, excavator time and sand backfill all affect the work. A route near Sandy Creek may need more crossing planning, and a US 190 right of way adds permit coordination. At 467 road miles from Yukon, Jasper mobilization is part of our planning for the bore schedule.

Questions people ask about boring in Jasper

Does Trinity take directional boring jobs in Jasper County, and how is the work staffed?

Yes. We take directional boring work in Jasper County, with our own crews and partner contractor crews from satellite yards. Our main office is in Yukon, and Trinity stays responsible from the first call through the bore log, whichever crew is on site. For a route near Gibson Street, we plan the crew and equipment around the bore path and scope.

Who approves a bore under US 190 in Jasper, and which state office reviews it?

TxDOT reviews a utility bore on US 190 through its Beaumont District. The utility owner submits the application in TxDOT’s online RULIS system, while we prepare the bore plan and profile for the filing. The owner holds the permit, and we work under it. The route and crossing details determine what the submission needs to show.

Which railroad owns the Jasper track at BNSF Railway, and what does a crossing require?

BNSF Railway owns the 2.55 track miles mapped in Jasper on the Longview Subdivision. A bore beneath that track needs an agreement from BNSF Railway, with crossing conditions established by the railroad. If the route also lies on highway right of way, TxDOT asks for a copy of the agreement.

Can a utility line be bored under Sandy Creek in Jasper?

Yes, a planned bore can pass under Sandy Creek without cutting the channel, but the route needs a crossing plan. The creek runs 3.03 channel miles in Jasper, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We also plan depth to stay below the channel.

Who runs Jasper’s public water system, and where does its water come from, so we can plan nearby boring work?

The City of Jasper owns the public water system, which uses groundwater wells. It reports 4,051 service connections and 9,884 people served. Those existing lines matter when planning a new route along Wheeler Street, so the water line locations need to be identified before drilling.

Which company owns electric lines for a Jasper County conduit bore?

The City of Jasper owns its municipal electric system. Entergy Texas, Deep East Texas Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative also report electric service in Jasper County. We confirm which owner serves the specific route before planning conduit, since those county reports do not identify the provider at every address.

Does Trinity cover Sam Rayburn and rural sites outside Jasper?

Yes. We take work across Texas, including projects near Sam Rayburn, 10.9 miles north of Jasper, and rural sites outside the city limits. The route still needs to be checked for its own ground and crossings. Near Jasper, Sandy Creek and US 190 are examples of features that can affect the bore plan.

How much notice does Texas811 need for a Jasper bore along Gibson Street?

Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Jasper utility notices, Texas811 describes the required lead time as at least two working days, which shapes our schedule. If a Jasper bore start moves more than 14 days past the original notice, we submit a new request before proceeding. Marks that move or wear off must be refreshed through Texas811 before work continues.

What affects our directional bore cost beneath US 190 in Jasper, including the crossing conditions we must plan around?

The price depends on the route and scope, including length, pipe or conduit size, soil, utility crossings, pavement, pits and creek crossings. Clay mapped beneath Jasper can affect drilling and reaming, while a US 190 crossing adds right of way coordination. A route near BNSF Railway or Sandy Creek has its own crossing demands, and mobilization reflects the distance from Yukon.

Where the Jasper facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Jasper

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Jasper, Texas

Type the address of your job in Jasper. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Jasper

Same county: Buna · Evadale. All counties: Texas county list.