San Diego Texas Directional Boring: Czar Soil, Texas State Highway 359 and CPKC Rail
Quick Answer: Can we get your line beneath the CPKC (Kansas City Southern) track in San Diego without opening the surface? Yes; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for crossings like that rail line. San Diego is 599 road miles from our Yukon, Oklahoma main office, so a bore near Texas State Highway 359 needs mobilization planned with route and access in view. USDA maps Czar soil across 42 percent of the city; clay can cling to a reamer, so we plan the fluid and reaming sequence for the ground.
San Diego bores at a glance
- County seat of Duval County, with part of the city in Jim Wells County, Texas. Population 3,620 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 599 miles, about 11.6 hours of driving.
- Ground: Czar soil is mapped on 42 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 359, Texas State Highway 44 and FM 1329. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), with 20 mapped street and rail crossings.
- Named streams inside the boundary: San Diego Creek.
- Public water: San Diego Municipal Utility District 1, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in San Diego and Duval County?
Can you get a line under a San Diego road or track without cutting it? We take directional boring work in this incorporated city, which lies mainly in Duval County and also extends into Jim Wells County. The Census Bureau Vintage 2024 estimate puts San Diego at 3,620 people. We install water, sewer, gas, electric conduit and fiber; a run along Benavides Street or toward the CPKC track can be planned to pass beneath the surface.
Our main office is in Yukon, Oklahoma, and San Diego work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike, a record that matters around San Diego Municipal Utility District 1 lines and the electric systems reported in Duval County. Our family business began in 1965, and we have done directional boring since 1982; that experience informs how we plan San Diego crossings.

What kind of ground does San Diego’s Czar soil mean for a bore?
The USDA soil survey maps Czar as the largest soil series in San Diego, covering 42 percent of the city. At about 40 inches below the surface, sandy clay loam is mapped across 90 percent of the area, and the average clay share at that depth is 29 percent. Fine sandy loam covers 35 percent of the surface, while sandy clay loam covers 57 percent. Czar soil maps show mapped patterns rather than test borings, so we use them as planning clues for a Benavides Street bore.
| USDA soil survey, inside the San Diego city limits | What is mapped |
|---|---|
| Soil series mapped | Czar 42 percent, Racombes 12 percent, Premont 10 percent, Gertrudis 10 percent and Sinton 6 percent |
| Texture at the surface | sandy clay loam 57 percent, fine sandy loam 35 percent and gravelly fine sandy loam 5 percent |
| Texture about 40 inches down | sandy clay loam 90 percent and cemented material 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 86 percent and clayey sand (SC) 4 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 1 percent of the area |
Bedrock is not mapped in the top five feet of San Diego, which does not rule out rock deeper down. Seasonal water table conditions are mapped in 1 percent of the area and flood prone soils in 7 percent, so pits near San Diego Creek still need attention to water and channel depth. High steel corrosion risk is mapped in 1 percent; the line owner can set coating needs for steel casing or tracer wire, while HDPE avoids that soil corrosion concern. The map includes Pleistocene age Lissie Formation and Chibanian age alluvium, with sand, silt and clay that can vary along a route.
How do crews handle San Diego’s sandy clay loam?
San Diego’s mapped sandy clay loam can hold a bore open, but clay may stick to the reamer or grip pipe. Around Benavides Street, we match fluid, reaming and pullback timing to the actual route.
- In Czar soil, we choose drilling fluid and reaming passes to limit sticky clay buildup, then have the pipe ready to pull before the open hole can grip it.
- For a route near San Diego Creek, we plan the bore depth below the channel and check whether the crossing needs a jurisdiction review.
- Along Benavides Street, we hydrovac pothole marked utilities before the drill approaches; surface paint gives position, not the buried line’s depth.
- At Texas State Highway 359, our walkover locator tracks the drill head and records depth and pitch as the bore advances beneath the route.

Where might a San Diego bore pass under CPKC (Kansas City Southern)?
Texas State Highway 359 has 3.2 mapped roadway miles inside San Diego, and Texas State Highway 44 has 2.1. FM 1329 has 0.1 mapped mile in the city. A line crossing one of these routes needs a plan for the highway right of way, while Benavides Street, St Peters Avenue and St Charles Avenue are among the longest named local streets. San Diego has 43.55 public road centerline miles overall, so the route and the exact crossing point shape the bore plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 359 | State highway | 3.2 roadway miles inside | State highway office |
| Texas State Highway 44 | State highway | 2.1 roadway miles inside | State highway office |
| FM 1329 | State highway | 0.1 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 2.03 track miles inside | The railroad |
| San Diego Creek | Stream | 1.6 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rosita Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) Laredo Subdivision crosses San Diego for 2.03 track miles, and 20 mapped street and rail crossings make track clearance a real route consideration. A crossing needs an agreement with the railroad that owns the track, which sets the casing, depth and flagging details. San Diego Creek has 1.6 channel miles inside the city, with 4 mapped street crossings of named streams. Rosita Creek touches or runs along the boundary; creek work is checked for federal jurisdiction during planning.
Whose approval does San Diego need for Texas State Highway 359?
Texas State Highway 359 belongs to the state highway system, so a bore in its right of way needs a TxDOT utility permit. The TxDOT Laredo District reviews the filing, and the utility that owns the line submits it through the online RULIS system; we prepare the bore plan and profile for that permit. For highway crossings, TxDOT rules set minimum cover by line type, and the permit can require a different depth. San Diego streets such as Benavides Street belong to the incorporated city. A crossing of CPKC track needs an agreement from CPKC, while a San Diego Creek route is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near San Diego Municipal Utility District 1?
San Diego Municipal Utility District 1 supplies public water from groundwater wells. The system reports 2,658 service connections and a population served of 6,291, so a bore along Collins Avenue or near the water network needs utility locations checked before drilling. Electric service reported in Duval County comes from AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative. We confirm the electric line owner for the specific address before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| San Diego Municipal Utility District 1 | Public water system | Groundwater wells | 2,658 connections, 6,291 people served |
| AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative | Electric utilities reporting service in Duval County and Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put San Diego’s median housing year at 1973; 38 percent of homes were built before 1960, while 12 percent date from 2000 or later. That mix can mean a Benavides Street project is renewing an older service or adding a new connection, and either route can meet buried lines. We use hydrovac potholing to expose marked utilities before drilling nearby, since paint shows position but not depth.

Do you cover San Diego and nearby Coyote Acres?
San Diego is Duval County’s seat and extends into Jim Wells County, with 1.9 square miles of land at an elevation of 304 feet. The city’s ZIP code is 78384. Nearby places include Loma Linda East, 2.8 miles east, and Coyote Acres, 7.2 miles southeast; Alice is 10.6 miles east and is the nearest larger city. Our Yukon, Oklahoma main office is 599 road miles away, about 11.6 drive hours, so distance is part of planning work along Texas State Highway 359 or other San Diego routes.
Places near San Diego
- Directional boring in Loma Linda East: 2.8 miles east
- Directional boring in Coyote Acres: 7.2 miles southeast
- Directional boring in Rancho Alegre: 8.5 miles east
- Directional boring in Alice Acres: 8.7 miles southeast
- Directional boring in Alice: 10.6 miles east
Which jobs call for a bore near San Diego’s Benavides Street?
- Highway crossing: A bore beneath Texas State Highway 359 avoids an open cut across the state route and is planned around its right of way.
- Water service: A new or replacement water line near San Diego Municipal Utility District 1 needs a route checked against existing groundwater system lines.
- Fiber drop: A fiber conduit along Benavides Street can pass beneath the street surface, with marked utilities exposed before drilling near them.
- Creek crossing: A San Diego Creek bore needs depth planned below the channel and a jurisdiction check during project planning.
- Rail crossing: A line beneath the CPKC track needs a crossing agreement that sets casing, depth and flagging requirements.
- Electric conduit: Near St Charles Avenue, we confirm which reported electric provider owns the line before planning the conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a San Diego bore near Collins Avenue?
For a Collins Avenue quote, start with the address or map pin, then tell us what goes in the ground, its pipe or conduit size and the footage. A sketch or plans help show whether the route approaches Texas State Highway 359, CPKC track or San Diego Creek. Those details let us see access, crossings and the likely bore layout before pricing the work.
A short service run with clear access near Collins Avenue may be simpler to plan than a longer route through Czar soil or beneath CPKC track. Length, pipe size, soil and rock, exposed utilities, pavement, creek crossings, pits and excavator time all affect the work. A Texas State Highway 359 crossing adds permit planning, and mobilization reflects San Diego’s 599 road miles from Yukon. Emergency timing or a high profile crossing can also change the work plan.
Questions people ask about boring in San Diego
Does Trinity take directional boring work in San Diego and Duval County?
Yes. We take directional boring work in San Diego, which lies mostly in Duval County and partly in Jim Wells County. We manage the job from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. The work can include a line beneath a local street or the CPKC track.
What does a bore under CPKC (Kansas City Southern) in San Diego require?
The mapped CPKC (Kansas City Southern) track runs 2.03 miles through San Diego. A crossing needs an agreement from the railroad that owns the track; that agreement sets casing, depth and flagging details. If the line also occupies highway right of way, TxDOT asks for a copy of the railroad agreement.
Can a line be bored under San Diego Creek in San Diego?
A bore beneath San Diego Creek can be planned, with the route and depth set to pass below the channel. The creek has 1.6 channel miles inside the city, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Site conditions and access determine the final approach.
Who manages San Diego’s public water system, and where does its water come from?
San Diego Municipal Utility District 1 runs the public water system, which uses groundwater wells. It reports 2,658 service connections and a population served of 6,291. If your bore is near Collins Avenue or another water route, the utility locations need to be checked before drilling.
Which electric company should I check with in Duval County before a San Diego conduit bore?
AEP Texas Central, Medina Electric Cooperative and Nueces Electric Cooperative report electric service in Duval County. Those records do not establish which company owns the line at every San Diego address. We confirm the line owner for the specific route before planning conduit, including a run near Benavides Street.
Does San Diego control St Charles Avenue, and can a bore avoid cutting it?
St Charles Avenue is a city street because San Diego is incorporated. Directional boring can route a line beneath the street without cutting through the pavement, subject to the route and site conditions. We check for marked utilities along the path before drilling near them.
What bore sizes and lengths can you handle for a San Diego job near Collins Avenue?
For a job near Collins Avenue, we handle lines from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. The right setup depends on the line, route and ground. A sketch can help show how the planned bore fits the street or nearby crossings.
How early should I call Texas811 for a San Diego bore on Benavides Street?
For a Benavides Street start, make the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. Texas811 describes that as at least two working days, so we allow that notice period when scheduling directional boring in San Diego. If the start slips more than 14 days past the notice, make a new request; worn or moved marks must be refreshed before work continues.
What affects the cost of a San Diego bore near Texas State Highway 359?
The route and work scope set the cost. A bore near Texas State Highway 359 may involve highway permit planning, while CPKC track, creek crossings, pavement, utility exposures, pits and excavator time can add work. Length, pipe size, ground conditions and mobilization from Yukon also matter. We need the route details to assess the job.
Where the San Diego facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside San Diego
- U.S. Census Bureau, TIGER/Line 2024: San Diego boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: San Diego
- U.S. Census Bureau, American Community Survey 2019 to 2023: San Diego housing units and year built
- Macrostrat geologic map compilation: map units under San Diego
- U.S. EPA Safe Drinking Water Information System: public water systems serving San Diego
- U.S. Department of Transportation, North American Rail Network: track owners in Duval County and Jim Wells County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Duval County and Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: San Diego elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to San Diego
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in San Diego
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in San Diego, Texas
Type the address of your job in San Diego. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for San Diego
County: Jim Wells County directional boring. Same county: Freer · Benavides · Realitos · Concepcion · Premont · Orange Grove · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch. All counties: Texas county list.
