Alice Acres Texas Directional Boring: Opelika Soil, US 281 Bypass and Lattas Creek
Quick Answer: Need a line beneath a road or creek without opening the surface? We do directional boring, also called horizontal directional drilling (HDD), for routes near US 281 Bypass in Alice Acres. From our Yukon, Oklahoma main office, Alice Acres is 593 road miles away, and Lattas Creek is one local crossing to plan around. The USDA soil survey maps sandy clay loam at about 40 inches, so we plan the hole and fluid for clay that can grip the pipe.
Alice Acres bores at a glance
- Unincorporated community in Jim Wells County, Texas. Population 465 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 593 miles, about 11.5 hours of driving.
- Ground: Opelika soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281 Bypass, US 281, FM 1554 and FM 625. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near CPKC (Kansas City Southern) in Alice Acres?
Can you put a line beneath a road or track without cutting the surface? We take directional boring work in Alice Acres, in Jim Wells County, including routes near the CPKC (Kansas City Southern) track outside the mapped community boundary. The Census Bureau counted 465 people here in the 2020 Census; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines along roads such as Valley of Peace Road.
Our main office is in Yukon, Oklahoma, and Alice Acres work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. A typical Alice Acres request is smaller beside that reach, from a service line to a casing route near US 281 Bypass.

What should we know about the ground in Opelika and Alice Acres?
The USDA soil survey maps Opelika soil across 26 percent of Alice Acres, with Delfina at 19 percent and Lattas at 16 percent. At about 40 inches below the surface, sandy clay loam covers 56 percent of the mapped area; clay is mapped under 30 percent. For Alice Acres, we use mapped soil patterns rather than test borings to guide our early boring plans. Sandy clay loam can cut readily, but clay in the mix may cling to a reamer or grip the pipe, so the actual route needs checking before we choose the drilling fluid and reaming sequence.
| USDA soil survey, inside the Alice Acres mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Opelika 26 percent, Delfina 19 percent, Lattas 16 percent, Clareville 15 percent and Banquete 8 percent |
| Texture at the surface | fine sandy loam 56 percent, clay 30 percent and loam 15 percent |
| Texture about 40 inches down | sandy clay loam 56 percent, clay 30 percent and clay loam 15 percent |
| Engineering class about 40 inches down | fat clay (CH) 44 percent, lean clay (CL) 37 percent and clayey sand (SC) 19 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 32 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 47 percent of the area |
The Alice Acres soil map does not show bedrock in the top five feet, but deeper rock remains possible for a bore. A seasonal water table is mapped within 60 inches across 32 percent of the area, which can put water in pits. Alice Acres flood prone soils are not mapped, so we do not treat the map as a site specific flood test. High steel corrosion risk covers 47 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that steel corrosion concern. The mapped Lissie Formation is Pleistocene age and includes sand, silt, clay and minor gravel, so conditions can vary along a bore.
How do we bore Alice Acres sandy clay loam?
Alice Acres has sandy clay loam at about 40 inches and clay across part of the mapped area. We plan the bore around the route and the ground we encounter, not just the surface texture shown near Opelika soil.
- At a route through sandy clay loam, we tune the drilling fluid to the ground and ream in stages so loose material does not undermine the bore.
- Where Alice Acres clay makes cuttings sticky, we manage fluid returns and pull the pipe after opening the hole to limit swelling and grip.
- A pit near the seasonal water table mapped in 32 percent of the area may need to stay small, with pumping ready if water collects.
- Before drilling near Kenny Drive, we hydrovac expose each marked utility on the bore path, then track the head and log depth and pitch.

Where might a line go under US 281 Bypass in Alice Acres?
US 281 Bypass and US 281 run inside the mapped Alice Acres boundary, alongside FM 1554 and FM 625. Texas State Highway 359, Texas State Highway 44 and US 281 Business are each 0.7 miles outside it. A bore beneath existing highway pavement is installed by boring or tunneling rather than opening the pavement. Valley of Peace Road is the longest named street at 1.03 miles; Sheila Drive and Kenny Drive are also mapped streets to consider when laying out service routes and access.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 Bypass | US highway | 1.9 roadway miles inside | State highway office |
| US 281 | US highway | 1.8 roadway miles inside | State highway office |
| FM 1554 | State highway | 5.1 roadway miles inside | State highway office |
| FM 625 | State highway | 1.8 roadway miles inside | State highway office |
| Texas State Highway 359 | Highway nearby | 0.7 miles outside | State highway office |
| Texas State Highway 44 | Highway nearby | 0.7 miles outside | State highway office |
| US 281 Business | Highway nearby | 0.7 miles outside | State highway office |
| CPKC (Kansas City Southern) | Railroad nearby | 0.7 miles outside | The railroad |
| Lattas Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Tranquitas Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) railroad is 0.7 miles outside the Alice Acres boundary, and no street and rail crossings are mapped inside the community. Lattas Creek is 0.3 miles away and Tranquitas Creek is 0.8 miles away; no named streams cross inside the boundary. The map shows 0.35 miles of unnamed drainage in Alice Acres, so a route near that drainage needs a site review. Our map shows no lakes or ponds within one mile of Alice Acres, a useful check when planning a bore route.
Who approves a bore in Alice Acres and Jim Wells County?
Alice Acres is an unincorporated community with no city government, so its streets and local approvals are handled by the county or state, depending on the road. For work in the right of way of US 281 Bypass, FM 1554 or another state or US route, the line owner files the utility permit through TxDOT’s RULIS system. Trinity supplies the bore plan and profile, and the TxDOT Corpus Christi District reviews the application. Under a highway crossing, electric and communication lines need 60 inches of cover, and water and pressurized sewer lines need 60 inches; the permit can set another depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may be buried in Alice Acres and Jim Wells County?
The water provider for the specific Alice Acres address has to be confirmed with the county or local water district before a bore is planned. A city department, regional utility, rural water association or water district may serve the property. For electric service reported in Jim Wells County, the utilities are AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative. We confirm which line owner is involved at the specific address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Alice Acres’ median year built at 2002; 57 percent of housing units date to 2000 or later, while 43 percent were built from 1960 to 1999. That mix can mean requests for both new service and replacement lines near Kenny Drive. Before drilling close to a marked utility, we use hydrovac potholing to expose it: paint shows its position, not its depth.

How far is Alice Acres from Rancho Alegre and our Yukon office?
Alice Acres is an unincorporated community in Jim Wells County, at an elevation of 226 feet and covering 5.89 square miles. ZIP code 78332 serves the area. Rancho Alegre is 1.9 miles north, Coyote Acres is 1.6 miles west, and Ben Bolt is 3.3 miles south. Alice, the county seat and nearest larger city, is 4.0 miles northeast. Our Yukon, Oklahoma main office is 593 road miles away, an 11.5 hour drive, so distance is part of planning a mobilization for Valley of Peace Road or US 281 Bypass.
Places near Alice Acres
- Directional boring in Coyote Acres: 1.6 miles west
- Directional boring in Rancho Alegre: 1.9 miles north
- Directional boring in Ben Bolt: 3.3 miles south
- Directional boring in Alice: 4 miles northeast
- Directional boring in Loma Linda East: 6.5 miles northwest
What kinds of bores come up near Valley of Peace Road in Alice Acres?
- Highway crossing: A bore beneath US 281 Bypass keeps the route below highway pavement instead of cutting across the travel surface.
- Water service: A service route near Kenny Drive starts with confirming the address provider and exposing marked lines along the planned path.
- Fiber conduit: A conduit route along Valley of Peace Road can avoid open cuts across driveways when the bore alignment and pits fit the site.
- Creek crossing: A route near Lattas Creek needs depth and access planning, with the crossing checked for federal waterway jurisdiction during planning.
- Rail crossing: A route near the CPKC (Kansas City Southern) track needs an agreement with the railroad that owns the track.
- Drainage bore: The 0.35 miles of unnamed drainage in Alice Acres calls for checking the proposed path and pit locations before drilling.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Lattas Creek in Alice Acres?
A map pin matters near Lattas Creek because a short shift in the route can change whether the bore approaches the creek or the unnamed drainage mapped inside Alice Acres. For an Alice Acres bore plan, send us the address or pin, what will go underground, pipe or conduit size and footage. A sketch or plans help us see how the proposed route meets Valley of Peace Road.
The work scope sets the price. Ground factors include the sandy clay loam and clay mapped around Opelika soil; crossings include pavement on US 281 Bypass or a creek route near Lattas Creek. Logistics include pit space, excavator time, backfill and mobilization from our Yukon office, 593 road miles away. Pipe size, bore length, exposed utilities, concrete, drainage crossings and emergency timing also affect the work plan and price.
Questions people ask about boring in Alice Acres
Does Trinity take directional boring jobs in Alice Acres and Jim Wells County?
Yes. We take jobs in Alice Acres and across Texas, with the work staffed by our own crews and partner drilling contractors we have vetted. The work can include a route near Valley of Peace Road or US 281 Bypass. We keep you working with Trinity from the first call through the bore log, whichever crew is on site.
Could groundwater near Lattas Creek affect bore pits in Alice Acres?
It can. The USDA soil survey maps a seasonal water table within 60 inches in 32 percent of Alice Acres, so pits near Lattas Creek or the mapped unnamed drainage may collect water. We plan pit size and pumping for the conditions at the route. Flood prone soils are not mapped in the community.
Does Opelika soil in Alice Acres pose a corrosion concern, and what pipe can I use?
The USDA soil survey maps high steel corrosion risk across 47 percent of Alice Acres. The line owner should consider the material and coating for steel casing or tracer wire. On an Alice Acres job, we can specify HDPE without the steel corrosion concern. The route near Opelika soil still needs site specific review before selecting materials.
What ground is under Alice Acres near Opelika soil at about 40 inches?
The USDA soil survey maps sandy clay loam at about 40 inches under 56 percent of Alice Acres, with clay under 30 percent. Opelika is the leading mapped soil series at 26 percent. Those are survey patterns, not test borings, so the ground along a proposed route such as Kenny Drive may vary.
Will a directional bore in Alice Acres encounter rock below the mapped top five feet?
For Alice Acres bore depth planning, no bedrock is mapped in the top five feet, and deeper rock is not ruled out. The geologic map shows the Lissie Formation, of Pleistocene age, with sand, silt, clay and minor gravel. A bore near FM 1554 still needs its route and actual ground conditions evaluated.
Who approves a bore under US 281 Bypass in Alice Acres?
For work in the US 281 Bypass right of way, the line owner applies for a TxDOT utility permit through RULIS; the TxDOT Corpus Christi District reviews it. We prepare the bore plan and profile for the owner’s application. The required cover depends on the line type and the permit conditions.
Can I reach Trinity after hours about an urgent bore near Kenny Drive in Alice Acres?
Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day. Tell us whether the urgent work is near Kenny Drive or another Alice Acres route, and what line or conduit is involved. We also provide 24 hour emergency response.
How much notice does Texas811 need for a bore by Valley of Peace Road in Alice Acres?
Count back at least 48 hours from excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as at least two working days. Do not submit earlier than 14 days before work. If a Valley of Peace Road start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before continuing.
What affects the price of a bore under US 281 Bypass in Alice Acres?
Price depends on the specific route and scope, not only its length. Soil conditions around Opelika, highway pavement on US 281 Bypass, utility crossings, pipe size, pits, excavator time, backfill and drainage crossings can all affect the work. Mobilization also matters because Alice Acres is 593 road miles from our Yukon office.
Where the Alice Acres facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alice Acres
- U.S. Census Bureau, TIGER/Line 2024: Alice Acres boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Alice Acres population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alice Acres housing units and year built
- Macrostrat geologic map compilation: map units under Alice Acres
- U.S. Department of Transportation, North American Rail Network: track owners in Jim Wells County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: Alice Acres elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alice Acres
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alice Acres
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alice Acres, Texas
Type the address of your job in Alice Acres. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alice Acres
Same county: Premont · Orange Grove · San Diego · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch · Alfred. All counties: Texas county list.
