trinityboringsolutions.com

Kenedy Texas Directional Boring: Pernitas Soil, Nichols Creek and US 181

Quick Answer: The City of Kenedy water system uses groundwater wells, and several utilities report electric service in Karnes County, so we confirm the line owner before a bore near Nichols Creek. We do directional boring, also called horizontal directional drilling (HDD), for crossings such as US 181 in Kenedy. The 508 road miles from our Yukon, Oklahoma main office matter for a route near Sunset Strip Street because mobilization is part of the plan. Pernitas sandy clay loam is mapped across 32 percent of Kenedy, and sticky clay can grip a reamer or pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kenedy bores at a glance

  • Incorporated city in Karnes County, Texas. Population 3,378 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 508 miles, about 9.8 hours of driving.
  • Ground: Pernitas soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: US 181, US 181 Business, Texas State Highway 72, FM 743 and FM 719. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Nichols Creek and Escondido Creek.
  • Public water: City of Kenedy, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Nichols Creek in Kenedy?

Kenedy is in Karnes County, with a Census Bureau Vintage 2024 estimate of 3,378 people. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath streets such as Escondido Street or crossings near Nichols Creek rather than through their surfaces. The line owner and marked utilities guide the bore path.

Our main office is in Yukon, Oklahoma, and Kenedy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982, planning Kenedy crossings along US 181 around local access needs. We have had no utility strike in over 25 years, a record we carry into planning around marked lines along 5th Street and near Nichols Creek.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect in Kenedy near Pernitas soil?

The USDA soil survey maps Pernitas soil across 33 percent of Kenedy, including Pernitas sandy clay loam on 32 percent of the mapped area. Coy and Buchel are also common series. At about 40 inches below the surface, clay is mapped across 57 percent of the area, while the average clay content at that depth is 41 percent. Pernitas and Coy are mapped soil patterns, not test borings, so we verify ground conditions before setting a Kenedy bore plan. On a route with the sticky clay indicated by those maps, we plan for reaming that can ball up and for soil that may grip the pipe.

USDA soil survey, inside the Kenedy city limitsWhat is mapped
Soil series mappedPernitas 33 percent, Coy 27 percent, Buchel 16 percent, Monteola 10 percent and Weesatche 4 percent
Texture at the surfacesandy clay loam 36 percent, clay loam 33 percent and clay 26 percent
Texture about 40 inches downclay 57 percent, sandy clay loam 37 percent and fine sandy loam 3 percent
Engineering class about 40 inches downfat clay (CH) 59 percent, lean clay (CL) 37 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils17 percent of the area
High corrosion risk for uncoated steel60 percent of the area

The soil survey maps bedrock within 60 inches across 3 percent of Kenedy, with a typical mapped depth of 14 inches; that does not rule out rock elsewhere or deeper. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 17 percent of the area. With 60 percent mapped for high steel corrosion risk, we consider casing and tracer wire materials when planning Main Street bores. The geologic map identifies Miocene age Oakville Sandstone, made up of sandstone and clay. Its sandstone may slow a bore, while clay can hold the hole open and cling to tooling.

How do we bore through sandy clay loam in Kenedy?

Pernitas soil and the clay mapped below Kenedy call for controlled fluid and staged reaming. We track the drill head from the surface and adjust the plan to the ground and the marked route.

  1. Pernitas sandy clay loam and the clay mapped at about 40 inches can stick to tooling, so we use controlled fluid and ream in stages.
  2. Heavy clay around Kenedy calls for watching fluid returns closely; excess pressure can lift pavement along streets such as Sunset Strip Street.
  3. We hydrovac pothole each marked utility on the bore path before the drill gets near it; locate paint along Escondido Street does not show depth.
  4. Near Nichols Creek, we plan the bore beneath the channel, track depth and pitch from the surface, and check for Corps jurisdiction during planning.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What could a Kenedy bore cross near US 181?

US 181, US 181 Business and Texas State Highway 72 run inside Kenedy, along with FM 743 and other farm to market roads. Texas State Highway 239 is mapped 0.9 miles from the city limits. A bore near these routes needs a path and depth planned around the highway right of way. Sunset Strip Street is the longest named street at 4.13 miles in the city; 5th Street runs 2.6 miles and Escondido Street runs 1.43 miles. Those streets give the crew specific corridors to check for access and buried lines.

CrossingTypeMapped extentWho has a say
US 181US highway5.2 roadway miles insideState highway office
US 181 BusinessUS highway3.7 roadway miles insideState highway office
Texas State Highway 72State highway2.1 roadway miles insideState highway office
FM 743State highway1.2 roadway miles insideState highway office
FM 719State highway0.9 roadway miles insideState highway office
Texas State Highway 72 BusinessState highway0.8 roadway miles insideState highway office
FM 792State highway0.7 roadway miles insideState highway office
FM 2102State highway0.5 roadway miles insideState highway office
FM 632State highway0.5 roadway miles insideState highway office
FM 1145State highway0.4 roadway miles insideState highway office
FM 2509State highway0.2 roadway miles insideState highway office
Texas State Highway 239Highway nearby0.9 miles outsideState highway office
Nichols CreekStream2.45 channel miles insideChecked for Corps of Engineers jurisdiction
Escondido CreekStream2.24 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Railroad tracks are not mapped inside Kenedy or within one mile outside the city, and no street and rail crossings are mapped. Nichols Creek runs 2.45 channel miles inside the city, and Escondido Creek runs 2.24. Public mapping shows 11 street crossings of named streams, so a proposed creek route needs a channel profile and a jurisdiction check during planning. No lakes or ponds are mapped within one mile of Kenedy.

Who approves a Kenedy bore in Karnes County?

Kenedy is incorporated, so Sunset Strip Street falls under city street control when we plan a bore. For work in the right of way of US 181, Texas State Highway 72 or an FM road, the line owner applies for the TxDOT utility permit in RULIS; the TxDOT Corpus Christi District reviews it. For crossings on Texas State Highway 72, we prepare the bore plan and profile for the owner’s application. Under highway pavement, TxDOT requires boring or tunneling, and rural highway bores extend under all travel lanes. Electric and communication lines need 60 inches of cover at crossings and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer needs 60 inches at crossings. Nichols Creek and Escondido Creek routes are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground near City of Kenedy?

The City of Kenedy public water system uses groundwater wells and reports 2,917 service connections serving 6,454 people. That matters when planning a new water route near Escondido Street because existing service lines must be located and exposed before drilling near them. Electric service reported in Karnes County includes AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Before planning an electric conduit bore on 5th Street, we confirm the line owner for the specific address.

Line ownerWhat it isSourceSize
City of KenedyPublic water systemGroundwater wells2,917 connections, 6,454 people served
AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric CooperativeElectric utilities reporting service in Karnes CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Kenedy’s median housing year at 1981. Kenedy’s housing survey places 18 percent of homes before 1960, 62 percent from 1960 to 1999 and 20 percent in 2000 or later, so we verify utilities carefully. A replacement route along 5th Street may meet older buried services, while a newer connection can need a different route. On Main Street, we hydrovac pothole every marked utility along the bore path before drilling nearby; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do we cover Kenedy and nearby Runge?

Kenedy covers 4.41 square miles in Karnes County, at an elevation of 291 feet, and uses ZIP code 78119. Karnes City, the county seat, is 6.0 miles northwest. Runge is 10.1 miles northeast, while Tulsita is 11.7 miles south. Beeville, the nearest larger city listed, is 28.6 miles south. From our Yukon, Oklahoma main office, Kenedy is 508 road miles away and a 9.8 hour drive. That distance is part of planning crew and equipment mobilization for a bore near US 181 or Nichols Creek.

Places near Kenedy

Which Kenedy jobs call for a bore near Escondido Street?

  • Highway crossing: A route under US 181 needs a planned profile and TxDOT review if the work occupies highway right of way.
  • Water service: A new connection near the City of Kenedy water system needs its route checked against existing groundwater well service lines.
  • Fiber conduit: A run along Escondido Street can pass beneath pavement while marked utilities are exposed before drilling near them.
  • Creek crossing: A bore under Nichols Creek needs a channel profile and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A route under 5th Street can replace a buried line without opening the street surface.
  • Electric conduit: A bore near FM 743 starts by confirming which Karnes County reported electric utility owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Kenedy bore near Sunset Strip Street?

For a route near Sunset Strip Street, start with the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see whether the line approaches US 181, a named creek or existing utilities. Those details let us plan the route and the access before setting the work scope.

A short, direct route through Pernitas sandy clay loam with few marked utilities is simpler to plan than a long crossing near US 181 or Nichols Creek. Length, pipe size, soil and rock, utility exposures, pavement, creek crossings, pits and excavator time all affect the work. Kenedy is 508 road miles from Yukon, so mobilization also figures into the plan. High profile or emergency work can add planning demands for a crossing of FM 743, so we account for route and utility coordination.

Questions people ask about boring in Kenedy

Does Trinity take directional boring jobs in Kenedy and Karnes County, and who staffs them?

Yes. We take directional boring work in Kenedy, and the job is staffed by our own crews or crews from partner drilling contractors we have vetted. The Yukon main office remains your point of contact from the first call through the bore log, including for a route near US 181.

Can a line be bored under Nichols Creek in Kenedy?

A bore can be planned beneath Nichols Creek, subject to the route, ground and access. The creek runs 2.45 channel miles in Kenedy, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A channel profile helps set the bore path below the creek.

Who runs Kenedy’s water system, and does groundwater supply it for bores by Nichols Creek?

The City of Kenedy owns the public water system, and groundwater wells supply it, a factor we check when planning Escondido Creek bores. Public records list 2,917 service connections serving 6,454 people. We use that information to flag existing water lines for locating and potholing when planning a nearby bore on Escondido Street.

Which electric company serves a Kenedy address in Karnes County, and who confirms conduit specs?

The line owner depends on the address. Utilities reporting electric service in Karnes County include AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. We confirm the owner for a specific Kenedy location before planning conduit, and the owner confirms its conduit specifications.

Who controls Kenedy streets, and can a bore avoid cutting Escondido Street?

Kenedy is incorporated, so Sunset Strip Street falls under city street control when we plan a bore. Directional boring can place a line beneath Escondido Street without opening the street surface, subject to the route and approvals that apply. We expose marked utilities along the path before the drill approaches them.

How old are Kenedy homes and buried lines near 5th Street, and what does that mean for replacement bores?

Kenedy’s median housing year is 1981, according to American Community Survey 2019 to 2023 estimates. Older homes along 5th Street may have older buried services to locate before a replacement route is set. We pothole marked utilities on the bore path rather than relying on surface marks for depth.

How much 811 notice does a Kenedy bore near Sunset Strip Street need, and what if marks move?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days beyond the original notice, make a new request. Marks that fade or move near Sunset Strip Street must be refreshed through Texas811 before work continues.

How far is Kenedy from the Yukon office, and does Beeville change the job plan?

Kenedy is 508 road miles and a 9.8 hour drive from our Yukon, Oklahoma main office, so we plan mobilization around that distance. Beeville is 28.6 miles south of Kenedy, but the job route and equipment needs determine mobilization. A crossing near US 181 or Nichols Creek still needs its own access and bore plan.

What affects the cost of a directional bore in Kenedy near US 181?

The scope sets the price: bore length and size, Pernitas soil or sandstone, marked utilities to expose, pavement, pits and any creek crossing all matter. A route beneath US 181 also brings right of way planning, while Kenedy’s 508 road miles from Yukon affect mobilization. High profile or emergency work can change the demands.

Where the Kenedy facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kenedy

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kenedy, Texas

Type the address of your job in Kenedy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kenedy

Same county: Falls City. All counties: Texas county list.