Karnes City Texas Directional Boring: Pernitas Sandy Clay Loam, US 181, Dry Escondido Creek
Quick Answer: From our Yukon, Oklahoma main office, Karnes City is 504 road miles away, and we staff planned work with our own crews and vetted partner contractor satellite yards near routes such as US 181. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas for crossings such as Dry Escondido Creek near Karnes City. Pernitas soil is the leading mapped soil series, and its sandy clay loam can hold a hole while clay can cling to the reamer. We stage reaming and plan the pull around that ground for routes near Panna Maria Avenue or nearby properties.
Karnes City bores at a glance
- County seat of Karnes County, Texas. Population 3,620 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 504 miles, about 9.7 hours of driving.
- Ground: Pernitas soil is mapped on 42 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181, US 181 Business, Texas State Highway 123, FM 99 and Texas State Highway 123 Business. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Karnes City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Karnes County and Karnes City?
From Yukon, Karnes City is 504 road miles away; our crews handle the work with support from vetted partner drilling contractor satellite yards. The Census Bureau Vintage 2024 estimate puts Karnes City at 3,620 people in Karnes County. We can bore water, sewer, gas, electric conduit or fiber routes beneath Davidson Street and Apperson Street, with the route and existing lines checked before drilling.
Our main office is in Yukon, Oklahoma, and Karnes City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a service line along Davidson Street, we handle sizes from 3/4 inch lines up to 48 inch casing and lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982.

How does Pernitas soil affect a bore in Karnes City?
The USDA soil survey maps Pernitas sandy clay loam across 42 percent of Karnes City, with Coy clay loam and Monteola clay also mapped. At the surface, sandy clay loam accounts for 43 percent of mapped texture, clay loam 33 percent and clay 20 percent. About 40 inches down, the survey maps clay in 48 percent of the area and sandy clay loam in 46 percent, with average clay content of 38 percent. Those patterns suggest a sticky hole in some routes near Panna Maria Avenue, so the drilling fluid and reaming pace need attention.
| USDA soil survey, inside the Karnes City city limits | What is mapped |
|---|---|
| Soil series mapped | Pernitas 42 percent, Coy 30 percent, Monteola 13 percent, Eloso 5 percent and Weesatche 4 percent |
| Texture at the surface | sandy clay loam 43 percent, clay loam 33 percent and clay 20 percent |
| Texture about 40 inches down | clay 48 percent, sandy clay loam 46 percent and silt loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 51 percent and fat clay (CH) 49 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 49 percent of the area |
The USDA soil survey maps no seasonal water table within 60 inches in Karnes City, while flood prone soils cover 2 percent of the mapped area. Bedrock is not mapped in the top five feet around Calvert Avenue, though deeper ground is not ruled out. High steel corrosion risk is mapped across 49 percent, so the line owner should weigh casing and tracer wire materials; HDPE is not affected by that soil corrosion. The geologic map shows Miocene age Oakville Sandstone, a sandstone and clay unit, so deeper changes in ground may affect the bore.
How do crews handle clay during a Karnes City bore?
Pernitas sandy clay loam and the mapped clay near Panna Maria Avenue call for controlled fluid and staged reaming. We expose marked utilities first, then keep the drill path and pull plan tied to what the ground is doing.
- In Pernitas sandy clay loam, we use a thinner fluid mix and ream in stages so sticky cuttings do not build up on the reamer.
- Where the Karnes City survey maps heavy clay, we watch fluid returns and pressure so the ground does not lift pavement near US 181.
- Before drilling near a marked line on Apperson Street, we hydrovac pothole to confirm its depth because locate paint only shows its position.
- As a bore advances near the mapped Oakville Sandstone, we track the head from the surface and log depth and pitch.

Where might a Karnes City line pass under Dry Escondido Creek?
US 181 and US 181 Business run through Karnes City, along with Texas State Highway 123, FM 99, Texas State Highway 123 Business, Texas State Highway 80 and FM 1144. Panna Maria Avenue is the longest named city street at 2.09 miles, followed by Davidson Street at 1.89 miles and Apperson Street at 1.84 miles. A route under any of these roads needs to account for the road owner and surface. Boring can keep pavement intact, but the alignment and work area still need to fit the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 3.5 roadway miles inside | State highway office |
| US 181 Business | US highway | 2.5 roadway miles inside | State highway office |
| Texas State Highway 123 | State highway | 2.2 roadway miles inside | State highway office |
| FM 99 | State highway | 1.8 roadway miles inside | State highway office |
| Texas State Highway 123 Business | State highway | 0.8 roadway miles inside | State highway office |
| Texas State Highway 80 | State highway | 0.2 roadway miles inside | State highway office |
| FM 1144 | State highway | 0.2 roadway miles inside | State highway office |
| Dry Escondido Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
The mapped inventory shows no railroad inside Karnes City or within one mile, and no street and rail crossings are mapped. Dry Escondido Creek lies 0.2 miles from the city limits rather than inside them; no named stream street crossings are mapped within the city. Unnamed drainage totals 2.77 miles, so a route near a drainage needs a site review. No lakes or ponds are mapped within one mile, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who permits a Karnes City bore beneath US 181?
US 181 belongs to the state highway system, so a bore in its right of way is reviewed by the TxDOT Corpus Christi District. The utility that owns the line submits the utility permit application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. For lines beneath existing US 181 pavement, TxDOT requires boring or tunneling, with the crossing encased and extended beneath all travel lanes on rural highways. Open trenching through a road or driveway needs written district engineer approval. Karnes City’s public streets belong to the city, while Dry Escondido Creek crossing plans are checked for federal jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near the City of Karnes City system?
The City of Karnes City public water system uses groundwater wells and serves 4,269 people through 1,423 service connections. That is useful context for a water route near Davidson Street, but the system connection at a specific address still needs to be identified. Electric utilities reporting service in Karnes County are AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. We confirm the line owner for an electric conduit bore near US 181 instead of assuming one provider serves every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Karnes City | Public water system | Groundwater wells | 1,423 connections, 4,269 people served |
| AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative | Electric utilities reporting service in Karnes County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Karnes City’s median housing year at 1973; 36 percent of homes were built before 1960, and 28 percent in 2000 or later. Along Davidson Street, that mix means a project may replace an older service or add a new connection, so the route matters. Before drilling near marked utilities, we use hydrovac potholing to expose them; paint shows position, not depth, especially where older lines may be close to a new bore.

Do you cover Karnes City and Floresville?
Karnes City is the county seat of Karnes County, covers 2.32 square miles and sits at 426 feet elevation. Its ZIP code is 78118. Kenedy is 6.0 miles southeast, Falls City 9.9 miles northwest and Runge 11.3 miles east; Floresville, the nearest larger city, is 24.1 miles northwest. From the Yukon, Oklahoma yard, the road distance is 504 miles and the drive is 9.7 hours. That distance matters when planning a bore near US 181 because mobilization is part of the job scope.
Places near Karnes City
- Directional boring in Kenedy: 6 miles southeast
- Directional boring in Falls City: 9.9 miles northwest
- Directional boring in Runge: 11.3 miles east
- Directional boring in Poth: 16.9 miles northwest
- Directional boring in Tulsita: 17.5 miles south
- Directional boring in Floresville: 24.1 miles northwest
What would we bore near Panna Maria Avenue in Karnes City?
- Water service: A short service bore near the City of Karnes City groundwater system can avoid opening pavement along Davidson Street.
- Highway crossing: A water, sewer or conduit route under US 181 needs a bore plan that follows TxDOT crossing requirements.
- Fiber conduit: A route beneath Panna Maria Avenue can keep the street surface intact while connecting a nearby property.
- Drainage crossing: A line near the 2.77 miles of unnamed drainage in Karnes City needs a route checked against the channel.
- Utility replacement: A bore near Apperson Street can replace an older service while potholing marked lines before drilling close to them.
- Electric conduit: For a route near Calvert Avenue, confirm the line owner before planning the conduit bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives a Karnes City bore quote near Calvert Avenue?
For a route near Calvert Avenue, start with its address or map pin and tell us what needs to go underground. A water service, sewer line or fiber conduit each needs its own route and size. Give us the pipe or conduit diameter and estimated footage; a sketch or plans help us see how the line relates to US 181 or nearby streets.
A clear route along Calvert Avenue with room for the pits is simpler to plan than a route with several utilities to expose. Length, pipe size, Pernitas soil, rock conditions, pavement, drainage crossings, pit and excavator needs, and sand backfill all affect the work. A crossing under US 181 brings highway requirements into the plan, while Dry Escondido Creek can add crossing review. Karnes City’s 504 road miles from Yukon also affect mobilization, and high profile or urgent work can change the scope.
Questions people ask about boring in Karnes City
Does Trinity take directional boring work in Karnes City and Karnes County, and how is it staffed?
Yes. We take directional boring work in Karnes City, with our own crews and support from satellite yards run by partner contractors we have vetted. You work with Trinity through planning and the bore log regardless of which crew is at the site. For a route near Panna Maria Avenue, we first need the location and line scope.
What does older housing along Davidson Street mean for replacement bores in Karnes City?
Karnes City has a mix of housing ages, so a Davidson Street bore could serve a replacement or a new connection. The American Community Survey 2019 to 2023 estimates put the median housing year at 1973, with 36 percent built before 1960 and 28 percent built in 2000 or later. We check marked lines before setting the bore path.
Can Karnes City Pernitas soil corrode steel, and what pipe should a bore use?
The USDA soil survey maps high steel corrosion risk across 49 percent of Karnes City, including areas with Pernitas soil. The line owner should consider the exposure when choosing casing or tracer wire materials. HDPE is not affected by that soil corrosion, but the right material depends on the line design near Calvert Avenue.
What ground does a bore encounter in Karnes City Pernitas soil?
Pernitas sandy clay loam is mapped across 42 percent of Karnes City. At about 40 inches below the surface, the USDA soil survey maps clay across 48 percent of the area and sandy clay loam across 46 percent. That mixture can mean sticky cuttings near Panna Maria Avenue, so fluid and reaming need control.
Could a Karnes City bore reach rock below the mapped soils?
Bedrock is not mapped in the top five feet around Apperson Street, but that does not rule out deeper rock. The geologic map identifies Miocene age Oakville Sandstone, made up of sandstone and clay. If the bore reaches harder ground, the drilling approach may need to change.
Who approves a Karnes City bore under US 181, and which state office reviews it?
TxDOT reviews a US 181 right of way permit through its Corpus Christi District. The utility that owns the line files the application in RULIS, and we provide the bore plan and profile for that filing. TxDOT requires a bore or tunnel beneath existing highway pavement, so the route needs to fit the crossing.
Can I reach Trinity after hours for an urgent bore near Apperson Street in Karnes City?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent request near Apperson Street. An urgent call does not replace planning around marked utilities or the route. We can discuss the location, line and access needs when you call.
How far ahead should I request locates for a Karnes City bore on Panna Maria Avenue?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work begins. If the start slips more than 14 days past the original notice for Panna Maria Avenue, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near US 181 in Karnes City?
The route and scope determine the work, not just length. For a US 181 crossing, highway requirements, pavement and the number of marked utilities to expose can affect the plan. Pernitas soil, pipe size, drainage crossings, pits, backfill and distance from Yukon also matter. High profile or urgent work can add planning demands.
Where the Karnes City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Karnes City
- U.S. Census Bureau, TIGER/Line 2024: Karnes City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Karnes City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Karnes City housing units and year built
- Macrostrat geologic map compilation: map units under Karnes City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Karnes City
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Karnes County
- U.S. Geological Survey, Elevation Point Query Service: Karnes City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Karnes City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Karnes City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Karnes City, Texas
Type the address of your job in Karnes City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Karnes City
All counties: Texas county list.
