Tulsita Texas Directional Boring: Orelia Soil, US 181 and Medio Creek
Quick Answer: Medio Creek is the main crossing to plan around; Trinity handles directional boring, also called horizontal directional drilling (HDD), in Tulsita, Texas. Our Yukon, Oklahoma main office is 520 road miles from US 181, which affects mobilization. Orelia soil covers 59 percent of the mapped area, and sandy clay loam below the surface can cling to tooling. We stage reaming and manage fluid near the creek.
Tulsita bores at a glance
- Unincorporated community in Bee County, Texas. Population 31 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 520 miles, about 10 hours of driving.
- Ground: Orelia soil is mapped on 59 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181 and FM 798. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Medio Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring near Tulsita’s 1st Street?
Tulsita is an unincorporated community in Bee County, with 31 people in the 2020 Census count; the Census Bureau does not publish yearly estimates for places this small. Along US 181, FM 798 or 1st Street, we install water, sewer, gas, electric conduit and fiber where a route needs to pass a drive, roadway or creek without an open cut.
Our main office is in Yukon, Oklahoma, and Tulsita work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line near Dirks Avenue to a 48 inch casing bore planned under Medio Creek, with bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982.

What is Tulsita ground like to bore through Orelia soil?
The USDA soil survey maps Orelia fine sandy loam across 59 percent of Tulsita, with Clareville sandy clay loam at 22 percent and Sinton sandy clay loam at 18 percent. Fine sandy loam makes up 59 percent of the mapped surface texture; sandy clay loam accounts for 41 percent. At about 40 inches below the surface, the survey maps sandy clay loam across 78 percent and clay loam across 22 percent. Those patterns point to clay that can cling to the reamer, so we plan fluid and reaming around the soil rather than treating it as loose sand.
| USDA soil survey, inside the Tulsita mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Orelia 59 percent, Clareville 22 percent and Sinton 18 percent |
| Texture at the surface | fine sandy loam 59 percent and sandy clay loam 41 percent |
| Texture about 40 inches down | sandy clay loam 78 percent and clay loam 22 percent |
| Engineering class about 40 inches down | clayey sand (SC) 77 percent and fat clay (CH) 22 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 18 percent of the area |
| High corrosion risk for uncoated steel | 18 percent of the area |
Bedrock is not mapped within the top five feet in Tulsita, but that does not rule out rock deeper down. The USDA soil survey maps no seasonal water table within 40 or 60 inches, while flood prone soils cover 18 percent of the mapped area. High steel corrosion risk is mapped across 18 percent, so the line owner should address casing or tracer wire protection; HDPE does not share that steel concern. The geologic map shows Alluvium of Holocene age along streams, with sand, silt, clay and gravel that can vary along a Medio Creek route.
How do crews bore Tulsita’s sandy clay loam?
Tulsita’s Orelia and Clareville soils call for a controlled hole, not a fast pull through sticky ground. We match fluid and reaming to the route, especially near Medio Creek.
- Orelia fine sandy loam and sandy clay loam below it can cling to the reamer, so we use thinner fluid and open the hole in stages along a 1st Street route.
- On a Mc Leod Avenue path, we expose each marked utility with hydrovac before the drill gets close; surface paint shows location, not depth.
- Near Medio Creek, we keep the bore below the channel and watch fluid returns so pressure does not lift nearby pavement.
- With the drill head tracked from the surface, we log depth and pitch along US 181 and have the pipe ready before the final ream.

Where does a line have to go under Medio Creek in Tulsita?
US 181 runs for 1.0 mapped roadway mile inside Tulsita’s community boundary, and FM 798 adds 0.4 mile. A utility route along either road needs its own path and access plan. The longest named streets are 1st Street at 0.23 mile, Dirks Avenue at 0.22 mile and Mc Leod Avenue at 0.19 mile. Circle Boulevard adds another short route at 0.17 mile. Those streets give a bore a compact work area, so the entry and exit pits must fit without cutting the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 1 roadway miles inside | State highway office |
| FM 798 | State highway | 0.4 roadway miles inside | State highway office |
| Medio Creek | Stream | 1.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Tulsita’s community boundary or within 1 mile outside it, so a mapped street and rail crossing is not part of the local picture. Medio Creek runs for 1.22 channel miles through the community, and one mapped street crossing of a named stream is present. No lakes or ponds are mapped within 1 mile. A creek route needs a depth plan that stays below the channel, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Who has to sign off on a Tulsita bore in Bee County?
Tulsita has no city government, so county streets such as Mc Leod Avenue are not city streets; confirm the road authority for a route before planning the work. US 181 and FM 798 are state highways, so work in their right of way needs a TxDOT utility permit. TxDOT’s Corpus Christi District reviews it, while the utility that owns the line files through RULIS; we provide the bore plan and profile for that filing. A highway bore is installed beneath the pavement by boring or tunneling, with cover set by the utility type and permit. Medio Creek also brings a jurisdiction check during crossing planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Tulsita in Bee County?
The water provider for a specific Tulsita address has to be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie a provider to this community. A water route near US 181 should not be scoped until that owner is identified. AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative report electric service in Bee County, but that does not establish which one serves an individual address. Confirm the line owner before planning a conduit bore along 1st Street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Bee County | EIA Form 861 | Confirm the line owner by address |
Reliable housing data is not published for a place as small as Tulsita, so the work could involve a longer service run rather than a predictable block by block replacement. Routes along Dirks Avenue or US 181 still need utility checks. Bee County averages 31.0 inches of precipitation a year, with September averaging 4.3 inches and February 1.6 inches, which can affect wet ground near Medio Creek. For example, a proposed line under Mc Leod Avenue gets a hydrovac pothole at marked utilities before the drill approaches.

What is near Tulsita and Pettus?
Tulsita is an unincorporated community in Bee County, covering 0.29 square miles at an elevation of 314 feet. Its ZIP codes are 78146 and 78119. Pettus is 1.9 miles south, Tuleta is 4.7 miles south, Normanna is 8.2 miles south, Pawnee is 11.5 miles west and Kenedy is 11.7 miles north. Beeville, the county seat and nearest larger city, is 16.9 miles south. The Yukon yard is 520 road miles away, a 10.0 hour drive, so that distance is part of planning a bore on US 181 or FM 798.
Places near Tulsita
- Directional boring in Pettus: 1.9 miles south
- Directional boring in Tuleta: 4.7 miles south
- Directional boring in Normanna: 8.2 miles south
- Directional boring in Pawnee: 11.5 miles west
- Directional boring in Kenedy: 11.7 miles north
- Directional boring in Beeville: 16.9 miles south
What boring work comes up near Tulsita’s Dirks Avenue?
- Highway crossing: A route under US 181 is bored beneath the travel lanes, with the utility owner’s TxDOT permit guiding cover and casing.
- Water service: A new service along 1st Street starts with confirming the address provider and locating marked lines before opening the bore.
- Fiber conduit: A conduit run near Circle Boulevard can pass below the street surface, with the entry and exit pits kept in the dirt.
- Creek crossing: A Medio Creek bore is planned below the channel and checked for federal jurisdiction before the route is set.
- Street route: A service along Dirks Avenue can avoid an open cut, with staged reaming suited to the mapped Orelia soil.
- Utility exposure: A proposed line beneath Mc Leod Avenue gets hydrovac potholes at marked utilities before drilling approaches them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Tulsita work near US 181?
A map pin matters on US 181 because a small shift can change whether the route uses the highway right of way or a nearby street. Send the address, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us check a route near Medio Creek before we scope the pits and crossings.
Price follows the route, starting with the 520 road miles from Yukon and the mobilization that distance requires. Orelia soil and the sandy clay loam below it affect drilling time and fluid handling. A US 181 crossing, a Medio Creek route, marked utilities to expose, pavement, pit access and sand backfill can change the work. Pipe size, footage and emergency timing also shape the scope, so the map pin and plans matter.
Questions people ask about boring in Tulsita
Does Trinity take directional boring jobs in Tulsita and Bee County, and who staffs them?
Yes. Trinity takes directional boring work in Tulsita and across Texas. The job may be done by our own crew or from a satellite yard run by a partner drilling contractor we have vetted. You work with Trinity through the bore log, whether the route is near US 181 or Medio Creek.
Who owns the electric lines in Tulsita, Bee County, and who confirms conduit specs?
AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative report electric service in Bee County, but the specific owner at a Tulsita address must be confirmed. The line owner can verify conduit requirements before a bore is planned near 1st Street or FM 798.
Does the county or a city control Tulsita’s Mc Leod Avenue, and must it be cut?
Tulsita is unincorporated and has no city government, so Mc Leod Avenue is not a city street. Confirm the road authority for the specific route. A directional bore can pass below the street without an open cut, with pits placed off the pavement where access allows.
Can groundwater or flood prone ground affect a Tulsita bore pit near Medio Creek?
It can. Flood prone soils cover 18 percent of the mapped area, and Medio Creek runs through the community, so route depth and pit placement need attention. The soil survey does not map a seasonal water table within 60 inches, but that does not replace checking actual conditions at the bore site.
What ground does a Tulsita bore cross in Orelia soil?
The USDA soil survey maps Orelia fine sandy loam across 59 percent of Tulsita. At about 40 inches down, sandy clay loam is mapped across 78 percent and clay loam across 22 percent. That lower texture can grip tooling, so we plan fluid and staged reaming for a route off Dirks Avenue.
Will a Tulsita bore hit rock beneath US 181?
Bedrock is not mapped within the top five feet in Tulsita, so the survey does not point to shallow bedrock along US 181. The geologic map shows Alluvium of Holocene age, including sand, silt, clay and gravel near streams. Deeper rock is still possible and is not ruled out by the map.
What bore sizes and lengths can Trinity handle near Tulsita’s Circle Boulevard?
We handle lines from 3/4 inch service size up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. The right setup near Circle Boulevard depends on what is being installed, the route and ground conditions, including the mapped sandy clay loam below the surface.
How much notice does Texas811 need for a Tulsita bore along 1st Street?
For a 1st Street bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before continuing.
What affects the cost of a directional bore in Tulsita near US 181?
The scope drives the price, including the 520 road miles from Yukon, bore length, line size and Tulsita’s sandy clay loam. A US 181 crossing, Medio Creek, exposed utilities, pavement, pits, excavator time and sand backfill can add work. High profile or emergency timing also affects the plan.
Where the Tulsita facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tulsita
- U.S. Census Bureau, TIGER/Line 2024: Tulsita boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Tulsita population count
- Macrostrat geologic map compilation: map units under Tulsita
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bee County
- U.S. Geological Survey, Elevation Point Query Service: Tulsita elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tulsita
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tulsita
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tulsita, Texas
Type the address of your job in Tulsita. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tulsita
Same county: Skidmore · Blue Berry Hill · Tynan. All counties: Texas county list.
