Runge Texas Directional Boring: Pernitas Soil, FM 81 and Ojo de Agua Creek
Quick Answer: Runge’s top five feet are mapped mostly as Pernitas sandy clay loam, with Oakville Sandstone shown in the area’s geologic mapping below. We handle directional boring, also called horizontal directional drilling (HDD), for lines crossing FM 81 without opening the roadway. Runge is 506 road miles from our Yukon, Oklahoma main office, so an Ojo de Agua Creek crossing affects route planning and mobilization. At about 40 inches, sandy clay loam dominates the map, while clay can cling to tooling and call for staged reaming.
Runge bores at a glance
- Incorporated city in Karnes County, Texas. Population 960 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 506 miles, about 9.7 hours of driving.
- Ground: Pernitas soil is mapped on 46 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: FM 81, Texas State Highway 72, FM 2773, FM 1020 and FM 885. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Ojo de Agua Creek.
- Public water: City of Runge, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Helena Street in Runge?
We take directional boring work in Runge, Karnes County, where the Census Bureau Vintage 2024 estimate puts the population at 960. A water line along Helena Street, sewer service near Main Street, or fiber route beside FM 81 can be installed by horizontal directional drilling. We also bore for gas and electric conduit, with the route planned for the specific address.
Our main office is in Yukon, Oklahoma, and Runge work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our range runs from 3/4 inch service lines to 48 inch casing, fitting projects from Helena Street services to larger crossings.

What ground does Runge’s Pernitas soil map show?
The USDA soil survey maps Pernitas across 46 percent of Runge, mainly as Pernitas sandy clay loam on 2 to 5 percent slopes. Coy clay loam accounts for 29 percent, with Weesatche sandy clay loam at 9 percent. At about 40 inches below the surface, sandy clay loam is mapped under 56 percent of the area, while clay is mapped under 31 percent. We treat mapped Pernitas and Coy patterns as planning references, not substitutes for test borings before a Runge bore. The mix means the drill plan may need to account for both sticky clay and easier cutting soil.
| USDA soil survey, inside the Runge city limits | What is mapped |
|---|---|
| Soil series mapped | Pernitas 46 percent, Coy 29 percent, Weesatche 9 percent, Clareville 6 percent and Olmedo 6 percent |
| Texture at the surface | sandy clay loam 56 percent, clay loam 35 percent and very gravelly loam 6 percent |
| Texture about 40 inches down | sandy clay loam 56 percent, clay 31 percent and clay loam 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 56 percent and fat clay (CH) 37 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 32 percent of the area |
The survey maps bedrock within 60 inches on only 1 percent of Runge, so most routes do not show shallow bedrock. The geologic map identifies Oakville Sandstone of Miocene age, with sandstone and clay, so deeper conditions may change. Ojo de Agua Creek is a field consideration because seasonal water table and flood prone soils are not mapped. High steel corrosion risk covers 32 percent of the area; the line owner should consider casing and tracer wire materials, while HDPE avoids that steel concern.
How do crews handle Runge’s sandy clay loam?
Runge’s USDA soil survey shows sandy clay loam at the surface and about 40 inches down, with clay also present. We match fluid, reaming and timing to the ground along each route, including streets such as Helena Street.
- With clay mapped under 31 percent of Runge at about 40 inches, we use a thinner drilling fluid and ream in stages to limit sticky buildup.
- Where Pernitas sandy clay loam is mapped, we keep the bore moving toward pipe installation after opening the hole so the ground has less time to grip the pipe.
- Near FM 81 pavement, we watch fluid returns and pressure; heavy clay can build pressure that lifts pavement if returns are not managed.
- At an Ojo de Agua Creek route, we track the drill head from the surface, logging depth and pitch as the path is guided beneath the channel.

Where might a Runge line pass under Ojo de Agua Creek?
FM 81, Texas State Highway 72, FM 2773, FM 1020, FM 885 and FM 102 run inside Runge’s limits. A route under one of these state roads needs its own alignment and crossing plan. Helena Street is the longest named street at 1.37 miles, followed by Main Street at 1.3 miles and Houston Street at 1.09 miles. Goliad Street and Guadalupe Street are also among the longer routes. A bore can leave pavement and driveways uncut, with entry and exit pits placed in dirt.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 81 | State highway | 1.4 roadway miles inside | State highway office |
| Texas State Highway 72 | State highway | 1.2 roadway miles inside | State highway office |
| FM 2773 | State highway | 1.1 roadway miles inside | State highway office |
| FM 1020 | State highway | 0.8 roadway miles inside | State highway office |
| FM 885 | State highway | 0.6 roadway miles inside | State highway office |
| FM 102 | State highway | 0.2 roadway miles inside | State highway office |
| Ojo de Agua Creek | Stream | 0.32 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Runge or within one mile outside its limits, so the public records show no local track route to plan around. Ojo de Agua Creek runs 0.32 channel miles inside town, but no street crossing of a named stream is mapped. Near FM 81, no lakes or ponds are mapped within one mile, so our bore plan still follows the actual route. If a proposed route crosses Ojo de Agua Creek, the creek crossing needs review for possible U.S. Army Corps of Engineers jurisdiction during planning.
Who approves work on Runge’s FM 81?
FM 81 is a state highway, as are Texas State Highway 72 and the farm to market roads through Runge. Work in their right of way needs a utility permit from the Texas Department of Transportation. The TxDOT Corpus Christi District reviews the application. The utility that owns the line submits it through the online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. Runge is an incorporated town, so we treat Main Street as a city street when planning a bore. No railroad is mapped near town, and an Ojo de Agua Creek route is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may already be buried in Runge and Karnes County?
The City of Runge public water system uses groundwater wells and has 494 service connections, with a reported population served of 1,482. That makes water service routes near Helena Street a reason to locate and expose existing lines before drilling. Utilities reporting electric service in Karnes County include AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Before we plan an electric conduit bore near Texas State Highway 72, we confirm the line owner at the specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Runge | Public water system | Groundwater wells | 494 connections, 1,482 people served |
| AEP Texas Central, City of Floresville, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative | Electric utilities reporting service in Karnes County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates place Runge’s median housing year at 1978, so we plan each bore around actual underground conditions. Runge’s housing estimates show 30 percent before 1960, 64 percent from 1960 to 1999 and 6 percent in 2000 or later; we verify underground conditions before boring. On Main Street, a bore may serve a replacement line or a newer service. We hydrovac pothole marked utilities on the route before drilling near them; paint shows position, not depth.

How far is Runge from Nordheim and our Yukon office?
Runge is in Karnes County, at an elevation of 324 feet, and covers 1.18 square miles. ZIP code 78151 serves the town. Nordheim is 6.5 miles northeast, Kenedy is 10.1 miles southwest, and Karnes City is 11.3 miles west and is the county seat. Cuero, the nearest larger city listed, is 29.8 miles northeast. Our Yukon, Oklahoma main office is 506 road miles away, a 9.7 hour drive. That distance is part of mobilization planning for work near FM 81 or Ojo de Agua Creek.
Places near Runge
- Directional boring in Nordheim: 6.5 miles northeast
- Directional boring in Kenedy: 10.1 miles southwest
- Directional boring in Karnes City: 11.3 miles west
- Directional boring in Yorktown: 14.2 miles northeast
- Directional boring in Tulsita: 18 miles south
- Directional boring in Cuero: 29.8 miles northeast
Which Runge jobs call for a bore near Main Street?
- Highway crossing: A bore beneath FM 81 can carry water, sewer or conduit without opening the existing roadway.
- Water service: A new or replacement water line near Main Street can connect to the City of Runge groundwater system.
- Fiber route: Fiber conduit along Helena Street can pass beneath driveways and pavement, with access pits placed in dirt.
- Creek crossing: A route beneath Ojo de Agua Creek needs a planned profile and a jurisdiction check during crossing review.
- Electric conduit: A conduit route near Texas State Highway 72 starts with confirming the line owner for that address.
- Street service: A sewer or gas line near Houston Street can be bored beneath the traveled surface rather than cut across it.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Runge bore near Helena Street?
For a quote near Helena Street, give us the address or map pin and say what will go underground. Include the pipe or conduit size and the footage; a sketch or plans help show the route. For a Main Street project, those details tell us what the bore must reach and what lies between the pits.
For an FM 81 crossing, the estimate reflects the route and its requirements, not just footage. Ground conditions matter: Pernitas sandy clay loam and clay can affect drilling and reaming. We also consider pipe or conduit size, utilities to expose, pavement or concrete, Ojo de Agua Creek or drainage crossings, pits, excavator time and sand backfill. Runge’s 506 road miles from Yukon affect mobilization, while high profile or emergency work can add planning demands.
Questions people ask about boring in Runge
Does Trinity take directional boring jobs in Runge, Karnes County, and who staffs them?
Yes. We take directional boring work in Runge, Karnes County. Our own crews and partner drilling contractors from vetted satellite yards can staff the work, while you deal with Trinity from the first call through the bore log. For a route near FM 81, the crew plan follows the job and its access needs.
Does Runge’s Pernitas soil create a corrosion concern, and what pipe can I use?
The USDA soil survey maps high steel corrosion risk across 32 percent of Runge, including areas mapped as Pernitas soil. The line owner should weigh material choices for steel casing and tracer wire. Pernitas is one mapped soil series in Runge, and HDPE is not affected by soil corrosion when we plan buried conduit. The survey is a planning reference, so a specific route near Helena Street may need its own evaluation.
What ground does a Runge bore pass through near Pernitas soil?
The USDA soil survey maps Pernitas sandy clay loam across 46 percent of Runge. At about 40 inches below the surface, sandy clay loam is mapped under 56 percent and clay under 31 percent. Those are area patterns, not test borings. Along a route near Main Street, sticky clay may call for staged reaming and careful fluid control.
Will a Runge bore hit rock beneath the streets?
Most of Runge is not mapped with shallow bedrock; the soil survey shows bedrock within 60 inches on only 1 percent of the area. The geologic map identifies Miocene Oakville Sandstone, made up of sandstone and clay, below the surface mapping. A route beneath Texas State Highway 72 still needs a profile suited to the actual ground encountered.
Who approves a Runge bore under FM 81, and which TxDOT office reviews it?
For work in the FM 81 right of way, the utility that owns the line submits the utility permit through TxDOT’s RULIS system. The TxDOT Corpus Christi District reviews it. We supply the bore plan and profile and work under the owner’s permit. A crossing under FM 81 must be planned for the highway alignment and its requirements.
Can a Runge line be bored beneath Ojo de Agua Creek?
A bore can be planned beneath Ojo de Agua Creek, which has 0.32 channel miles inside Runge. During planning, the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. The public records do not map a street crossing of the named stream, so the route and proposed crossing point matter.
How much notice does Texas811 need before a Runge bore near Helena Street?
Request a Texas811 locate at least 48 hours before excavation starts, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before the start. A Helena Street job delayed more than 14 days past the original notice needs a new request. If marks wear off or move, have them refreshed through Texas811 before work continues.
Does Runge’s distance from Yukon change a job near Cuero?
Runge is 506 road miles and a 9.7 hour drive from our Yukon, Oklahoma main office, which shapes our job scheduling. Cuero is 29.8 miles northeast of Runge, but it does not change the distance for a Runge mobilization. The route, equipment, ground and access near FM 81 all help shape the job plan.
What affects the price of a directional bore in Runge near FM 81?
The estimate reflects length, pipe or conduit size, Pernitas soil and any harder ground, plus marked utilities that must be exposed. Pavement at FM 81, drainage or Ojo de Agua Creek crossings, pits, excavator time and sand backfill can also affect the work. Mobilization from Yukon and high profile or emergency conditions are additional planning factors.
Where the Runge facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Runge
- U.S. Census Bureau, TIGER/Line 2024: Runge boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Runge
- U.S. Census Bureau, American Community Survey 2019 to 2023: Runge housing units and year built
- Macrostrat geologic map compilation: map units under Runge
- U.S. EPA Safe Drinking Water Information System: public water systems serving Runge
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Karnes County
- U.S. Geological Survey, Elevation Point Query Service: Runge elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Runge
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Runge
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Runge, Texas
Type the address of your job in Runge. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Runge
Same county: Falls City. All counties: Texas county list.
