trinityboringsolutions.com

Lueders Texas Directional Boring: Valera Soil, Texas State Highway 6 and Cottonwood Creek

Quick Answer: Cox Street, Main Street and McHarg Street are Lueders’ longest named streets; 13.61 public road miles lie within the limits, with Texas State Highway 6 running through town. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for lines crossing that highway and Cox Street. The Yukon main office is 271 road miles away, and Anson is 16.2 miles west of Lueders. Valera soil and shallow bedrock call for staged drilling and attention to the changing ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lueders bores at a glance

  • Incorporated city in Jones County, Texas. Population 261 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 271 miles, about 5.4 hours of driving.
  • Ground: Valera soil is mapped on 50 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 59 percent of the area.
  • Highways inside the boundary: Texas State Highway 6 and FM 1597. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Lueders, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Lueders near Texas State Highway 6?

Cox Street, Main Street and McHarg Street lead Lueders’ named streets; the city has 13.61 public road miles, and Texas State Highway 6 runs through it. The Census Bureau Vintage 2024 estimate places Lueders at 261 residents in Jones County, a figure we separate from bore route planning. We install water, sewer, gas, electric conduit and fiber lines beneath these streets and roads, with the route and crossings shaping each bore.

Our main office is in Yukon, Oklahoma, and Lueders work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record of no utility strike in over 25 years matters when work is planned near the City of Lueders water lines or county electric facilities. The family business began in 1965 and has done directional boring since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Lueders Valera soil affect a bore?

The USDA soil survey maps Valera soil across 50% of Lueders, Sagerton across 41% and Tobosa across 9%. Surface textures are mostly silty clay and clay loam. At about 40 inches below the surface, the survey maps bedrock in 51% of the area, clay loam in 41% and clay in 9%; sandy ground is not mapped at that depth. Valera, Sagerton, and Tobosa are mapped soil patterns we use for initial review, not substitutes for test borings on a Lueders route. Clay can cling to the reamer, so the plan may call for staged reaming and a thinner drilling fluid.

USDA soil survey, inside the Lueders city limitsWhat is mapped
Soil series mappedValera 50 percent, Sagerton 41 percent and Tobosa 9 percent
Texture at the surfacesilty clay 50 percent, clay loam 41 percent and clay 9 percent
Texture about 40 inches downbedrock 51 percent, clay loam 41 percent and clay 9 percent
Engineering class about 40 inches downlean clay (CL) 41 percent and fat clay (CH) 9 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches59 percent of the area (59 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Bedrock is mapped within 60 inches in 59% of Lueders, and hard bedrock is mapped across that same share; weathered bedrock is not mapped there. Near Cottonwood Creek, seasonal water table conditions and flood prone soils are not mapped, so we verify conditions before setting bore depth. High steel corrosion risk covers 58%, so the line owner should weigh casing and tracer wire materials. The Quaternary Red Silty Clay Disintegration Residuum can grade into shale or dolomite, while the Permian Clear Fork Group includes claystone, siltstone, sandstone and carbonate rock. A soil to rock change can push the drill head off line, so crews track its depth and pitch closely.

How do crews bore Lueders ground with shallow bedrock?

Valera silty clay and bedrock mapped near 40 inches make ground changes a planning concern. On a Lueders route, we match the reamer and fluid plan to the mapped soil and track the drill head as it advances.

  1. Valera soil is commonly silty clay, so we can adjust fluid and ream in stages to limit clay buildup as a bore advances beneath Cox Street.
  2. With bedrock mapped within 40 inches across 51% of Lueders, we monitor depth and pitch for a change from soil into rock.
  3. We hydrovac expose marked utilities along a Main Street bore before drilling near them, since surface markings do not show their depth.
  4. The 58% mapped high steel corrosion risk is a material consideration; the line owner selects casing and tracer wire materials for the route.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What could a new Lueders line cross near Cox Street?

Texas State Highway 6 has 1.2 mapped roadway miles inside Lueders, and FM 1597 has 0.4. No other highway is listed within 1.5 miles outside the limits. A route may also pass beneath Cox Street, Main Street or McHarg Street, the three longest named streets. The roadway surface and the space available for entry and exit pits affect the bore plan. For an existing highway, the installation method and cover requirements must be addressed before work is set.

CrossingTypeMapped extentWho has a say
Texas State Highway 6State highway1.2 roadway miles insideState highway office
FM 1597State highway0.4 roadway miles insideState highway office
Cottonwood CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Clear ForkStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Post Oak CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Clear Fork Brazos RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Lake ShackelfordLake or pond15 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The maps show no railroad inside Lueders or within 1 mile, so no track crossing is identified in the local records. No named stream runs inside the limits either. Cottonwood Creek lies 0.1 miles from the boundary, while Clear Fork and Post Oak Creek are also nearby; none of the named streams has a mapped street crossing inside the city. Lake Shackelford is 0.3 miles away. A route near a creek or lake needs crossing conditions considered during planning.

Who approves work under Texas State Highway 6 in Lueders?

The line owner, not Trinity, submits the utility application in TxDOT’s online RULIS system for work in the Texas State Highway 6 right of way; the TxDOT Abilene District reviews it. We prepare the bore plan and profile for the owner’s filing. Electric and communication lines crossing the highway need 60 inches of cover below the lowest point of the crossed grade; water lines need the same. Pressurized sewer lines also need 60 inches at crossings. Highway pavement is bored or tunneled, with casing, and a rural highway bore extends beneath all travel lanes. For Cox Street and other city streets, Lueders handles its own streets. A planned Cottonwood Creek crossing is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Jones County near Lueders?

For a Main Street bore, we coordinate around the city system serving 259 people through 191 service connections and using purchased surface water. A conduit route near the system needs the line owner confirmed before planning. Electric service reported in Jones County includes AEP Texas North, Big Country Electric Cooperative and Taylor Electric Cooperative; that list does not identify the provider at every Lueders address.

Line ownerWhat it isSourceSize
City of LuedersPublic water systemSurface water bought from another system191 connections, 259 people served
AEP Texas North, Big Country Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Jones CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Lueders’ median housing year at 1941; 70% of housing was built before 1960, 19% from 1960 to 1999 and 11% in 2000 or later. That age mix makes replacement work as relevant as new service, but it does not show where buried lines sit. Along Cox Street, marked utilities need hydrovac exposure before drilling near them because paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Lueders in relation to Anson and Abilene?

Lueders is an incorporated city in Jones County, at an elevation of 1,564 feet and covering 0.59 square miles. Its ZIP code is 79533. Anson, the county seat, is 16.2 miles west; Stamford is 17.0 miles north, and Abilene is 24.8 miles south. The Yukon yard is 271 road miles away, a drive of 5.4 hours. That distance is part of planning a bore in Lueders, whether the route is near Texas State Highway 6 or one of the city’s named streets.

Places near Lueders

Which Lueders jobs could use a bore near Cottonwood Creek?

  • Highway crossing: A Texas State Highway 6 bore follows the TxDOT plan and cover requirements while keeping the existing pavement intact.
  • Water service: A connection near the City of Lueders system needs its route checked against existing water lines and the purchased surface water network.
  • Fiber route: A Cox Street fiber bore can pass below pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A line planned near Cottonwood Creek needs a route and depth plan, with Corps jurisdiction checked during planning.
  • Street service: A Goeth Street water or sewer bore can avoid an open cut across the street when the site layout allows.
  • Electric conduit: Before planning conduit near FM 1597, the line owner is confirmed because county electric service providers do not identify every address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I price a Lueders bore near Goeth Street?

For a Goeth Street quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us lay out the route. Include nearby details such as Texas State Highway 6 or a drainage crossing. Those specifics help us see what the bore must pass beneath.

Length, pipe or conduit size, and the soil and rock conditions drive the scope first. Valera clay can cling to the reamer, while bedrock mapped near 40 inches may slow drilling or change the tool plan. Crossings and exposure work matter too, especially pavement near Texas State Highway 6 or a route near Cottonwood Creek. Pits, excavator time and sand backfill also affect the work. Mobilization from the Yukon yard is part of the estimate for a site 271 road miles away.

Questions people ask about boring in Lueders

Does Trinity take directional boring work in Jones County near Lueders?

Yes. Trinity takes directional boring jobs in Lueders and across Texas. Our main office is in Yukon, and work is staffed by our own crews or partner contractor satellite yards. You deal with Trinity through the bore log, including on a route near the City of Lueders water system.

What ground does a Lueders bore go through in Valera soil?

The USDA soil survey maps Valera soil across 50% of Lueders, mostly as silty clay at the surface. At about 40 inches down, it maps bedrock in 51% of the area and clay loam in 41%. Those mapped patterns help guide the plan, but they are not site specific test borings.

How much bedrock is mapped near the surface in Lueders?

Bedrock is mapped within 60 inches across 59% of Lueders, and hard bedrock is mapped across that same share; weathered bedrock is not mapped. The USDA soil survey also maps bedrock in 51% of the area at about 40 inches. A route may meet rock sooner than expected, so crews monitor drilling conditions.

Who permits a Texas State Highway 6 bore in Lueders: TxDOT Abilene District?

The utility owner submits the right of way application through TxDOT’s RULIS system, and the TxDOT Abilene District reviews it. Trinity provides the bore plan and profile for the owner’s application. Cover depends on line type; for example, electric and communication crossings need 60 inches below the lowest point of the highway grade.

Can a line be bored under Cottonwood Creek near Lueders?

A bore can be planned for a creek crossing, but the route and conditions need review. Cottonwood Creek is 0.1 miles from Lueders’ limits, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped absence of flood prone soils does not replace that crossing review.

Who runs the Lueders water system, and where does its water come from?

At a Cox Street crossing, we confirm the City of Lueders owns the public water system, which uses purchased surface water. For underground work in Jones County, we treat Lueders public records of 191 service connections and 259 people served as system context, not route counts. Before a bore near the system, the route still needs to be checked for existing lines so they can be exposed before drilling nearby.

Does Trinity cover Anson and rural sites outside Lueders?

Trinity takes work across Texas, including routes outside Lueders city limits. Anson is 16.2 miles west and Stamford is 17.0 miles north, with Abilene 24.8 miles south. The site location, access and distance from the Yukon yard all help shape the mobilization plan.

How much notice does Texas811 need for a Lueders bore near Cox Street?

For a Cox Street excavation, Texas811 requires a locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Main Street bore, if our start moves more than 14 days past the original notice, we submit a new request. Before continuing a crossing near FM 1597, we refresh worn or moved marks through Texas811.

What affects the cost of a Lueders bore under Texas State Highway 6?

Length, line size, soil and rock, utility crossings, exposure work and pavement all affect the job. The mapped Valera clay and shallow bedrock may change tooling and drilling time, while highway requirements shape the plan. Creek or drainage crossings, pits, equipment time and the 271 road miles from Yukon also matter.

Where the Lueders facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lueders

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lueders, Texas

Type the address of your job in Lueders. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lueders

Same county: Hamlin. All counties: Texas county list.