trinityboringsolutions.com

Boerne Texas Directional Boring: Doss Soil, Interstate 10, Cibolo Creek

Quick Answer: Interstate 10 is the major route to cross, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Boerne, Texas. The Yukon, Oklahoma main office is 496 road miles from Boerne, where US 87 and Texas State Highway 46 also shape bore routes. Doss soil and the area’s silty clay can hold a bore open but stick to the reamer. The USDA soil survey maps bedrock within 40 inches across 70 percent of the city, so crews need to watch for changes in ground as the bore advances.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Boerne bores at a glance

  • County seat of Kendall County, Texas. Population 22,712 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 496 miles, about 9.6 hours of driving.
  • Ground: Doss soil is mapped on 25 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: Interstate 10, US 87, Texas State Highway 46, RM 474 and RM 1376. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cibolo Creek, Menger Creek, Currey Creek and Browns Creek.
  • Public water: City of Boerne, surface water.
  • Electric: City of Boerne municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Boerne and Kendall County?

Boerne is in Kendall County, and the Census Bureau Vintage 2024 estimate puts its population at 22,712. Along Main Street or US 87, we install water, sewer, gas, electric conduit and fiber lines by directional boring when the route needs to pass beneath pavement or other surface features. Our work also includes auger boring, hydrovac potholing and trenching for routes through Boerne.

Our main office is in Yukon, Oklahoma, and Boerne work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business began in 1965 and took up directional boring in 1982; that experience covers Boerne work from 3/4 inch service lines to 48 inch casing.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport
Our Ditch Witch JT922 boring beneath a taxiway at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Boerne’s Doss soil bring?

The USDA soil survey maps Doss soil across 25 percent of Boerne and Denton soil across 23 percent. Silty clay makes up 61 percent of the mapped surface texture, with silty clay loam at 12 percent. At about 40 inches below the surface, the survey reports an average clay content of 34 percent and maps CL soils across 19 percent and CH soils across 8 percent. Sandy texture is not mapped at that depth. These are area patterns, so the route still needs field checks before choosing the drilling fluid and reaming plan.

USDA soil survey, inside the Boerne city limitsWhat is mapped
Soil series mappedDoss 25 percent, Denton 23 percent, Oakalla 12 percent, Brackett 11 percent and Anhalt 9 percent
Texture at the surfacesilty clay 61 percent, silty clay loam 12 percent and clay 11 percent
Texture about 40 inches downbedrock 70 percent, silty clay loam 12 percent and silty clay 8 percent
Engineering class about 40 inches downlean clay (CL) 19 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches70 percent of the area (25 percent hard rock, 45 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils14 percent of the area
High corrosion risk for uncoated steel72 percent of the area

Bedrock is mapped within 60 inches across 70 percent of Boerne, with typical depth at 25 inches; the survey maps hard bedrock across 25 percent and weathered bedrock across 45 percent. That mix can mean slower drilling and a change in tooling where the bit meets rock. A seasonal water table within 60 inches is not mapped, while flood prone soils cover 14 percent of the area, so Cibolo Creek crossings need depth planning. High steel corrosion risk is mapped across 72 percent, a concern for steel casing and tracer wire. The Glen Rose Formation, Albian in age, includes limestone, dolostone and marl.

How do crews handle Boerne’s shallow bedrock?

Doss soil and mapped shallow bedrock call for a plan that can change with the ground. On a Boerne route, we track the drill head from the surface and log depth and pitch as the bore moves.

  1. Doss soil and silty clay can cling to the reamer, so we use a thinner drilling fluid, ream in stages and plan the pipe pull for the same day.
  2. Where the Glen Rose Formation brings limestone or dolostone into a route, we allow for slower rock drilling and monitor steering at the soil to rock contact.
  3. On a Cibolo Creek route, we plan the bore depth to stay beneath the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.
  4. Near Main Street, we hydrovac pothole marked utilities before drilling close to them; paint gives position, not depth, so we verify the line underground.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Boerne bore cross near Main Street?

Interstate 10, US 87 and Texas State Highway 46 run within Boerne, with RM 474 and RM 1376 also inside the city limits. Main Street is the longest named street at 4.22 miles; Herff Road runs 2.61 miles and Menger Springs runs 1.88 miles. A bore beneath pavement can leave those surfaces uncut, with entry and exit pits placed off the road where access allows. The route and the specific roadway determine the bore plan.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate9.9 roadway miles insideState highway office
US 87US highway8.8 roadway miles insideState highway office
Texas State Highway 46State highway6.9 roadway miles insideState highway office
RM 474State highway2 roadway miles insideState highway office
RM 1376State highway0.2 roadway miles insideState highway office
Cibolo CreekStream4.9 channel miles insideChecked for Corps of Engineers jurisdiction
Menger CreekStream2.19 channel miles insideChecked for Corps of Engineers jurisdiction
Currey CreekStream1.61 channel miles insideChecked for Corps of Engineers jurisdiction
Browns CreekStream1.45 channel miles insideChecked for Corps of Engineers jurisdiction
Frederick CreekStream1.15 channel miles insideChecked for Corps of Engineers jurisdiction
Ranger CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Easter CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Balcones CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Boerne LakeLake or pond194 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Boerne or within one mile outside its limits, and no street and rail crossing is mapped in the city. Cibolo Creek runs 4.9 channel miles through Boerne, while Menger Creek runs 2.19 miles and Currey Creek 1.61 miles. Public mapping shows 36 street crossings of named streams in the city. Boerne Lake covers 194 acres inside the limits, so creek and lake routes need their own crossing review.

Whose permission does a Boerne bore under Interstate 10 need?

For work in Interstate 10, US 87, Texas State Highway 46, RM 474 or RM 1376 right of way, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT San Antonio District reviews it. We prepare the bore plan and profile for that owner and work under its permit. TxDOT cover rules set the route depth: electric and communication lines need 60 inches at a highway crossing, water lines need 60 inches, and pressurized sewer lines need 60 inches. The city owns its streets, including Main Street. Cibolo Creek and other water crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities have lines in Boerne and Kendall County?

The City of Boerne owns the public water system, which uses surface water and reports 9,638 service connections serving 24,769 people. Boerne owns its municipal electric system, which we account for when planning bores near Menger Creek. EIA records report county service from the City of San Antonio, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative. For a conduit route near Main Street or Interstate 10, the line owner for the specific address needs to be confirmed before the bore plan is set.

Line ownerWhat it isSourceSize
City of BoernePublic water systemSurface water9,638 connections, 24,769 people served
City of Boerne municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration6,381 customers reported
City of San Antonio, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Kendall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Boerne’s median housing year at 2006; 5 percent of homes were built before 1960 and 68 percent in 2000 or later. That mix can mean both replacement work on older lines and new service routes. Along Menger Springs, hydrovac potholing exposes each marked utility on the bore path before drilling near it, because locate marks show position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What places near Boerne and Fair Oaks Ranch do we cover?

Boerne is the Kendall County seat, with an elevation of 1,433 feet and a land area of 11.75 square miles. The city’s ZIP codes are 78006 and 78015. Fair Oaks Ranch is 6.0 miles southeast, and Scenic Oaks is 6.7 miles southeast. San Antonio, the nearest larger city, is 25.4 miles southeast. From our Yukon, Oklahoma main office, Boerne is 496 road miles away and a 9.6 hour drive, a distance that can affect mobilization for work near Cibolo Creek or Interstate 10.

Places near Boerne

What boring work comes up in Boerne near Cibolo Creek?

  • Highway crossing: An Interstate 10 bore runs beneath the travel lanes, with the route and cover planned to meet the TxDOT permit.
  • Creek crossing: A Cibolo Creek route needs depth planning beneath the channel and a check for Corps jurisdiction during planning.
  • Water service: A connection to the City of Boerne water system can follow a route near Herff Road without opening the road surface.
  • Electric conduit: Near Main Street, we confirm the line owner and expose marked utilities before setting the conduit bore path.
  • Fiber route: A fiber bore along US 87 can pass beneath paved sections, with pits placed in dirt at either end where the route allows.
  • Utility potholing: On Menger Springs, hydrovac potholing reveals marked lines before the drill head approaches their mapped positions.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Boerne bore near Ranger Creek Road?

A map pin matters on Ranger Creek Road because the exact route determines whether a bore meets pavement, a utility or a drainage feature. For a Cibolo Creek crossing, send the address or pin, what will go underground, pipe or conduit size, and footage. A sketch or plans for the Boerne route help us see entry and exit pits and choose a path around marked lines.

Price depends on the route, not just its length. The 496 road miles from Yukon affect mobilization, while Doss soil and mapped bedrock can change drilling time and tooling. A crossing beneath Interstate 10, pavement or a creek adds different planning needs. Pipe size, exposed utilities, pits, excavator time and sand backfill also shape the work. High profile or emergency work can add requirements to a Boerne job.

Questions people ask about boring in Boerne

Does Trinity Boring Solutions take directional boring jobs in Boerne and Kendall County?

Yes. We take directional boring work in Boerne, with the work handled by our own crews or from partner contractor satellite yards that Trinity has vetted. You deal with Trinity through the bore log, whether the route is near Main Street, Interstate 10 or Cibolo Creek.

Who approves a utility bore under Interstate 10 in Boerne?

The utility owner applies for the TxDOT permit through RULIS, and the TxDOT San Antonio District reviews it. We prepare the bore plan and profile for the utility owner and work under its permit for a crossing under Interstate 10 in Boerne.

Can a line be bored under Cibolo Creek in Boerne?

A line can be planned beneath Cibolo Creek, which runs 4.9 channel miles through Boerne. The route needs depth planning to stay under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Main Street: who runs Boerne’s public water system, and where does its water come from?

The City of Boerne owns the public water system, and its source is surface water. The system reports 9,638 service connections serving 24,769 people, so a proposed service route near Herff Road should be matched to the system and the specific address.

Who owns electric lines in Boerne and Kendall County, and who confirms conduit specs?

The City of Boerne owns its municipal electric system. EIA records also list the City of San Antonio, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative as serving Kendall County. Confirm the line owner and conduit specifications for the address before planning a bore near US 87.

Can a bore avoid cutting Menger Springs in Boerne, and who runs the street?

As an incorporated city in Kendall County, Boerne owns its city streets, so we plan Herff Road bores within city jurisdiction. A directional bore can pass below Menger Springs without cutting the pavement, with pits set in dirt on either side where space and the route allow.

What bore sizes and lengths can you handle near Ranger Creek Road in Boerne?

For work near Texas State Highway 46, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The workable size and length for a Ranger Creek Road route depend on the plans, ground and crossings.

How much notice does Texas811 need before a bore on Main Street in Boerne?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. If a Main Street start slips more than 14 days past the original notice, request again. Along Old San Antonio Road, we get worn or moved marks refreshed through Texas811 before boring work continues.

What affects the cost of a directional bore under Interstate 10 in Boerne?

Length, pipe or conduit size, Doss soil, mapped bedrock, exposed utilities and pavement all affect the scope. An Interstate 10 crossing can add permit and depth planning, while creek crossings, pits, excavator time, backfill and mobilization from Yukon also matter. The route details determine the price.

Where the Boerne facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Boerne

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Boerne, Texas

Type the address of your job in Boerne. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Boerne

Same county: Comfort. All counties: Texas county list.