trinityboringsolutions.com

New Deal Texas Directional Boring: Olton Clay Loam, Interstate 27, BNSF Railway

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for New Deal crossings beneath Interstate 27 and BNSF Railway. New Deal is 365 road miles from our Yukon, Oklahoma main office, and we staff Aspen Avenue work with our own crews and vetted partner crews. Olton clay loam dominates the mapped ground, so sticky cuttings can collect on a reamer and the hole needs controlled fluid. That ground favors staged reaming and a ready pipe pull rather than leaving an opened Olton bore idle.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

New Deal bores at a glance

  • Incorporated city in Lubbock County, Texas. Population 748 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 365 miles, about 6.7 hours of driving.
  • Ground: Olton soil is mapped on 75 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 27, US 87 and FM 1729. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: City of New Deal, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does Trinity take New Deal boring work near Blackwater Draw?

New Deal is 365 road miles from our Yukon yard, and we staff work in Lubbock County with our own crews and vetted partner drilling crews. The Census Bureau Vintage 2024 estimate puts the town at 748 people, up from a 2020 base of 729. Along routes near Aspen Avenue or US 87, we install water, sewer, gas, electric conduit and fiber by directional boring.

Our main office is in Yukon, Oklahoma, and New Deal work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range spans 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet for work near Interstate 27. We are a family business started in 1965, with directional boring work dating to 1982; that experience informs jobs along Aspen Avenue.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Olton soil affect boring in New Deal?

Olton soil shapes most New Deal bore routes, with the USDA soil survey mapping the Olton series across 75 percent of the town. Olton clay loam, 0 to 1 percent slopes, covers 72 percent of the mapped area. At about 40 inches below the surface, clay loam accounts for 84 percent of mapped texture, and average clay content is 38 percent. Heavy clay is mapped across 89 percent at that depth, while sandy ground is not mapped there. These mapped patterns help us plan, but they are not test borings.

USDA soil survey, inside the New Deal city limitsWhat is mapped
Soil series mappedOlton 75 percent, Estacado 9 percent, Acuff 7 percent and Randall 6 percent
Texture at the surfaceclay loam 84 percent, loam 9 percent and clay 6 percent
Texture about 40 inches downclay loam 84 percent, sandy clay loam 9 percent and clay 6 percent
Engineering class about 40 inches downlean clay (CL) 94 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches6 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel89 percent of the area

The USDA soil survey leaves bedrock unmapped in New Deal’s top five feet, which does not rule out rock at greater depth. A seasonal water table within 60 inches is mapped in 6 percent of the area, so pits may need pumping; flood prone soils are not mapped. High steel corrosion risk covers 89 percent of the area, a concern for uncoated casing or tracer wire that the line owner should address. The mapped Blackwater Draw Formation is Cenozoic and includes sand, fine alluvium and silt, locally with clay.

How do we drill New Deal clay loam?

We adapt each New Deal bore to Olton clay loam rather than treating the mapped profile as a field test. Along Aspen Avenue, that means controlling fluid and keeping the pipe pull sequence ready.

  1. With average clay content of 38 percent at about 40 inches near C R 2300, use a thinner fluid blend with polymer to limit sticky buildup on the reamer.
  2. Because heavy clay is mapped across 89 percent of New Deal at 40 inches, ream in stages and pull the line the day the hole opens.
  3. On a crossing beneath Interstate 27, watch fluid returns and control pressure so the heavy clay does not lift pavement.
  4. Before the drill approaches any marked utility on a New Deal bore path, expose it by hydrovac; near Aspen Avenue, locate paint shows position but not depth.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a New Deal bore pass under Aspen Avenue?

New Deal bore routes can cross Interstate 27, US 87 or FM 1729, each of which has mapped roadway within town limits. Aspen Avenue runs 3.11 miles inside town, Auburn Avenue 2.67 miles and Monroe Avenue 1.6 miles. Those named streets give a route its local shape, while nearby driveways and pavement affect where the bore pits can sit. We plan the entry and exit points so a crossing beneath a road or driveway can avoid cutting its surface.

CrossingTypeMapped extentWho has a say
Interstate 27Interstate5.2 roadway miles insideState highway office
US 87US highway5.2 roadway miles insideState highway office
FM 1729State highway1.5 roadway miles insideState highway office
BNSF RailwayRailroad3.01 track miles insideThe railroad
Blackwater DrawStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
North Fork Double Mountain Fork Brazos RiverStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 3.01 track miles inside New Deal, and public records map 3 street and rail crossings in town. Blackwater Draw is 0.6 miles from the town limits, and the North Fork Double Mountain Fork Brazos River is 0.7 miles away; no named stream crossing of a town street is mapped. With no lakes or ponds mapped within one mile of New Deal, we use that map check when planning bore paths. A proposed route near either waterway still needs site specific planning.

Who approves New Deal bores near BNSF Railway?

For a New Deal bore in Interstate 27, US 87 or FM 1729 right of way, TxDOT reviews the work through its Lubbock District. The utility owner files in TxDOT’s RULIS system, and we prepare the bore plan and profile for that application and work under the owner’s permit. A bore beneath existing highway pavement uses boring or tunneling; the TxDOT rules also set cover requirements, encasement and the rural highway crossing extent. A route under BNSF Railway needs an agreement from the railroad, which sets crossing conditions. Aspen Avenue is a city street because New Deal is incorporated. A planned crossing of Blackwater Draw is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve New Deal through the City of New Deal system?

The City of New Deal public water system uses purchased surface water and reports 309 service connections serving 729 people. Electric service reported in Lubbock County includes Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near the City of New Deal water system.

Line ownerWhat it isSourceSize
City of New DealPublic water systemSurface water bought from another system309 connections, 729 people served
Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Lubbock CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put New Deal’s median housing year at 1978; 32 percent of units were built before 1960, 53 percent from 1960 to 1999 and 15 percent in 2000 or later. A route near Monroe Avenue may serve a replacement for older pipe or a newer service. Before drilling near any marked utility, we expose it by hydrovac because locate marks show position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is New Deal near Lubbock, Texas?

New Deal is in Lubbock County, about 12.0 miles north of Lubbock, the county seat and nearest larger city. The town covers 2.33 square miles at an elevation of 3,300 feet. Across New Deal ZIP codes 79415, 79403 and 79350, we confirm the service address before planning underground work. Abernathy is 6.5 miles north, Shallowater is 8.8 miles west and Idalou is 10.4 miles southeast. Our Yukon yard is 365 road miles away, a 6.7 hour drive, so distance is part of planning a bore near Interstate 27.

Places near New Deal

Which New Deal jobs call for a bore near Auburn Avenue?

  • Highway crossing: A bore beneath Interstate 27 or US 87 can carry a water line or conduit without opening the paved travel lanes.
  • Water service: A connection near the City of New Deal public water system can run beneath an Aspen Avenue driveway or street.
  • Fiber route: A conduit bore along Auburn Avenue can keep the fiber path below the street surface and its driveways.
  • Rail crossing: A utility route beneath BNSF Railway needs the railroad’s crossing agreement before the bore is planned.
  • Creek crossing: A proposed route beneath Blackwater Draw needs site planning because the channel lies 0.6 miles from town limits.
  • Utility exposure: For a line beneath Aspen Avenue, we hydrovac pothole each marked utility on the bore path before drilling near it.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a New Deal bore near C R 2300?

For a New Deal quote, start with the address or map pin, such as a route near C R 2300. For New Deal work in ZIP code 79415, tell us what goes underground, its pipe or conduit size and footage. A sketch or plans showing the path and crossings near Auburn Avenue or US 87 help us see the work before we price it.

Olton clay loam is the first planning factor because its sticky cuttings can build up on the reamer and affect the bore sequence. Next come the number of utilities to expose and crossings near Interstate 27 or BNSF Railway, followed by pavement, pits, excavator time and sand backfill. Creek or drainage crossings can add planning. Mobilization also reflects New Deal’s 365 road miles from Yukon, while a high profile or emergency job can change the work plan.

Questions people ask about boring in New Deal

Does Trinity take boring jobs in New Deal and Lubbock County?

Yes, Trinity Boring Solutions takes directional boring work in New Deal, Lubbock County. Our own crews and vetted partner drilling contractors staff jobs, while you work with Trinity from the first call through the bore log. We can plan water, sewer, gas, electric conduit or fiber routes near Aspen Avenue.

Could a New Deal bore in ZIP code 79350 hit rock?

The soil mapping does not show bedrock in New Deal’s top five feet, though that does not rule out deeper rock. The mapped Blackwater Draw Formation is Cenozoic and includes sand, fine alluvium and silt. A route near C R 2300 still needs field conditions checked as the bore is planned.

Who approves a bore under Interstate 27 in New Deal?

TxDOT’s Lubbock District reviews work in Interstate 27 right of way in New Deal. The utility owner submits the application in RULIS, with our bore plan and profile supporting it. For highway pavement, the route is installed by boring or tunneling, with the permit setting the project requirements.

What must we plan for when boring under BNSF Railway in New Deal?

BNSF Railway owns 3.01 track miles within New Deal, and a crossing needs an agreement from the railroad. The agreement establishes details for that crossing, including casing, depth and flagging. The mapped 3 street and rail crossings in town make route planning important near the track.

Can a line be bored under Blackwater Draw near New Deal?

A bore under Blackwater Draw can be evaluated during planning, but the stream is 0.6 miles outside New Deal’s limits. The route and site conditions determine whether the crossing is workable, and planning checks for U.S. Army Corps of Engineers jurisdiction. No named stream crossing of a town street is mapped.

Who runs New Deal’s water system, and is its water purchased surface water?

Because the City of New Deal owns its system and uses purchased surface water, we account for that service when planning underground work. Public records list 309 service connections serving 729 people. For a bore near the system, the connection point and existing line location need to be considered along streets such as Aspen Avenue.

Can I reach Trinity after hours about an urgent New Deal bore near Monroe Avenue?

Yes, a person answers Trinity’s phone at (405) 409-7423 24 hours a day. Call about the urgent work near Monroe Avenue and describe the location and what line is involved. Trinity provides 24 hour emergency response, with the scope and site conditions guiding the response.

How early should I call 811 for a New Deal bore along Aspen Avenue?

The person arranging a bore along Aspen Avenue should contact Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, submit a new notice. In New Deal, we request refreshed marks through Texas811 whenever marks are worn or moved, and continue work only after they are refreshed.

What affects the cost of a directional bore under Interstate 27 in New Deal?

The route, length and pipe or conduit size matter, as do New Deal’s Olton clay loam and the utilities that must be exposed. A crossing under Interstate 27 or BNSF Railway can add requirements, while pavement, pits and backfill affect the work. Mobilization reflects the 365 road miles from Yukon; there are no set prices for every scope.

Where the New Deal facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in New Deal

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in New Deal, Texas

Type the address of your job in New Deal. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for New Deal

Same county: Wolfforth · Slaton · Ransom Canyon. All counties: Texas county list.