trinityboringsolutions.com

Shallowater Texas Directional Boring: Acuff Loam, US 84 and BNSF Railway

Quick Answer: The City of Shallowater runs the groundwater water system, while electric providers reported in Lubbock County vary, so we confirm the line owner before work. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes involving US 84 and BNSF Railway in Shallowater. The Yukon main office is 362 road miles away, with Clovis Road among the local routes to plan around. Acuff loam and clay loam are common in the mapped ground, so sticky cuttings and clay gripping the pipe can affect reaming and pull timing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Shallowater bores at a glance

  • Incorporated city in Lubbock County, Texas. Population 2,972 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 362 miles, about 7 hours of driving.
  • Ground: Acuff soil is mapped on 33 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 84, FM 1294, FM 179 and FM 1500. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Public water: City of Shallowater, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near BNSF Railway in Shallowater?

The City of Shallowater owns the public water system near BNSF Railway, and Trinity Boring Solutions takes directional boring work in Shallowater, Lubbock County. Using the Census Bureau Vintage 2024 estimate of 2,972, we plan underground work with Shallowater’s population in view. Along streets such as Clovis Road and Avenue L, our crews install water, sewer, gas, electric conduit and fiber lines by boring where the route and crossings call for it. Confirming the existing line owner helps set the bore path before drilling.

Our main office is in Yukon, Oklahoma, and Shallowater work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity began directional boring in 1982, and four decades of work help us plan for the clay loam mapped around Acuff soil, where sticky cuttings can affect reaming. The family business started in 1965, and you work with Trinity from the first call through the bore log, whichever crew is on site.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Acuff soil mean for drilling in Shallowater?

Acuff soil is the largest mapped soil series in Shallowater, and its loam is a useful clue for planning a bore. The USDA soil survey maps Acuff across 33 percent of the city, with Estacado at 31 percent and Olton at 24 percent. At 40 inches, the mapped texture is 55 percent clay loam and 42 percent sandy clay loam; the average clay content at that depth is 35 percent. These are mapped soil patterns, not test borings, so the actual route still needs site review.

USDA soil survey, inside the Shallowater city limitsWhat is mapped
Soil series mappedAcuff 33 percent, Estacado 31 percent, Olton 24 percent and Amarillo 8 percent
Texture at the surfaceclay loam 58 percent, loam 33 percent and fine sandy loam 9 percent
Texture about 40 inches downclay loam 55 percent and sandy clay loam 42 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel56 percent of the area

Bedrock is not mapped in the top five feet around Shallowater, which does not rule out deeper rock. Seasonal water tables are mapped in 1 percent of the area, and flood prone soils are not mapped; the Yellow House River still matters if a route approaches its boundary. High steel corrosion risk is mapped in 56 percent of the area, so the line owner should consider casing and tracer wire materials. The USDA map also identifies Eolian Sheet Sand of Cenozoic age and Cenozoic sedimentary rocks of Paleocene age.

How do we drill Shallowater clay loam?

We plan each Shallowater bore around its mapped clay loam and the exact route, such as a crossing near Avenue L. Soil maps guide the plan, but field conditions decide how the hole behaves.

  1. With Acuff clay loam mapped across 33 percent of Shallowater, we use measured fluid and staged reaming to manage sticky cuttings and avoid loading the hole.
  2. Where the 35 percent average clay content at 40 inches applies, we watch fluid returns closely so pressure does not lift pavement near US 84 or Clovis Road.
  3. Before a bore approaches marked services along Avenue L, we hydrovac pothole them; paint locates position, while the pothole confirms depth.
  4. A walkover locator follows the drill head near BNSF Railway, while we record depth and pitch to keep the crossing aligned with the plan.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross on Clovis Road in Shallowater?

A Shallowater bore can involve US 84, FM 1294, FM 179 or FM 1500, so the route determines which road authority and pavement conditions apply. Clovis Road is the longest named street in the city at 2.86 miles; Avenue L runs 1.33 miles and Avenue Q runs 1.04 miles. A plan near 12th Street may also need to account for nearby services and pavement. Boring can keep a route beneath roads and driveways uncut, with pits set in the dirt on each side.

CrossingTypeMapped extentWho has a say
US 84US highway1.3 roadway miles insideState highway office
FM 1294State highway1.6 roadway miles insideState highway office
FM 179State highway0.8 roadway miles insideState highway office
FM 1500State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad1.42 track miles insideThe railroad
Yellow House RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Yellow House DrawStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.42 track miles inside Shallowater, and public mapping shows two street and rail crossings in the city. A crossing beneath the BNSF track needs the railroad’s agreement before the route is set. No named streams are mapped inside the city; the Yellow House River runs along or touches the boundary, and Yellow House Draw is 0.2 miles away. No street crossings of named streams or lakes and ponds within one mile are mapped.

Who approves a Shallowater bore near US 84?

The line owner files a TxDOT utility permit for work in the US 84 right of way, not the drilling contractor. TxDOT’s Lubbock District reviews the application in its RULIS system, and we give the utility owner the bore plan and profile for its filing. On US 84, electric and communication lines need 60 inches of cover at a crossing and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer crossings need 60 inches, subject to a different depth set by the district.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities lie underground in Shallowater for the City of Shallowater?

The City of Shallowater owns a public water system supplied by groundwater wells, with 1,309 service connections and 2,964 people served. Electric service reported in Lubbock County includes Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative; the provider for a particular address must be confirmed before a conduit bore. Near Avenue Q or US 84, we use hydrovac potholing to expose marked water and electric lines before drilling close to them.

Line ownerWhat it isSourceSize
City of ShallowaterPublic water systemGroundwater wells1,309 connections, 2,964 people served
Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Lubbock CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Shallowater’s median housing year at 1986, context for underground work. We consider Shallowater’s housing mix: the survey estimates 23 percent of homes were built before 1960, 43 percent from 1960 to 1999 and 34 percent in 2000 or later. On an Avenue L replacement route, that mix can mean tying into older buried lines as well as newer services. We pothole marked utilities along the planned path because surface marks show position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Shallowater from Lubbock and our Yukon office?

Shallowater is in Lubbock County at an elevation of 3,308 feet, and its incorporated limits cover 1.62 square miles. For boring in Shallowater, we use ZIP code 79363 to identify the city served. New Deal is 8.8 miles east, while Lubbock is 10.6 miles southeast and is both the county seat and the nearest larger city. Smyer is 12.3 miles southwest, Abernathy is 12.3 miles northeast, and Wolfforth is 12.5 miles south. The Yukon main office is 362 road miles away, a 7.0 hour drive, which factors into mobilization for work along US 84 or local streets.

Places near Shallowater

What would we bore near Avenue L in Shallowater?

  • Highway crossing: A bore beneath US 84 needs a route and cover plan that fits the TxDOT right of way and pavement.
  • Street service: A water or sewer service near Clovis Road can pass beneath the street with entry and exit pits outside the pavement.
  • Fiber conduit: A route along Avenue L can carry fiber conduit while avoiding marked utility lines through potholing before drilling.
  • Rail crossing: A proposed route beneath BNSF Railway needs the railroad’s agreement and a crossing plan for the track.
  • Water connection: Work near the City of Shallowater groundwater system starts by identifying existing water lines and exposing marked utilities.
  • Drainage route: A bore near Yellow House River needs planning for the channel and a check of possible Corps jurisdiction.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near 12th Street in Shallowater?

For a route near 12th Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help show whether the route crosses a street, US 84 or BNSF Railway. Include the proposed entry and exit areas so we can review access and the bore path before preparing the scope.

We set prices for directional boring in Shallowater according to the job details. Ground conditions such as Acuff clay loam affect drilling and reaming; crossings of US 84, BNSF Railway or marked utilities affect planning and exposure work. Pavement, concrete, creek or drainage crossings, pits, excavator time and sand backfill can add work to the scope. The 362 road miles from Yukon also affect mobilization, while high profile or emergency work can require a different plan.

Questions people ask about boring in Shallowater

Does Trinity Boring Solutions take jobs in Shallowater and Lubbock County, and who staffs them?

Yes, Trinity Boring Solutions takes directional boring work in Shallowater and across Texas. Our own crews and partner contractor crews from vetted satellite yards can staff work in Lubbock County. You coordinate with Trinity from the first call through the bore log, including work along Clovis Road or near BNSF Railway.

Can a Shallowater bore go under Yellow House River?

A bore under Yellow House River can be considered after the route and ground conditions are reviewed. The river runs along or touches Shallowater’s boundary, so the plan must address channel depth and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Site details determine the bore design.

Who runs the public water system in Shallowater, and where does its water come from?

The City of Shallowater owns the public water system, and we account for groundwater wells in our planning. Public records list 1,309 service connections and 2,964 people served in Shallowater, figures we consider when planning underground work. For a bore near Avenue Q, identify the particular water line and expose marked utilities before the drill approaches.

Which electric provider should I check for a Shallowater bore in Lubbock County?

Electric providers reporting service in Lubbock County are Southwestern Public Service, City of Lubbock, Lyntegar Electric Cooperative and South Plains Electric Cooperative. The provider at a specific Shallowater address is not established by that county list. Confirm the line owner and conduit specifications before planning a bore along US 84.

Does Shallowater control Avenue Q, and does a bore have to cut the street?

Shallowater is incorporated, so its city streets, including Avenue Q, belong to the city itself. A directional bore can pass below pavement without cutting the street, with pits placed on either side where the site allows. The route and utility locations determine the entry and exit points.

How old are Shallowater homes and buried lines near Avenue L, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Shallowater at 1986. That does not date a particular buried line, but a replacement bore along Avenue L may need to connect older infrastructure while avoiding newer services. Before drilling near marked utilities in Shallowater, we expose them as part of our underground work.

Does Trinity cover New Deal and rural sites outside Shallowater?

Yes, Trinity takes work across Texas, including Shallowater, nearby New Deal and rural sites outside city limits. New Deal is 8.8 miles east of Shallowater. For a route beyond the city, the address or map pin helps us review access, crossings and mobilization from Yukon.

How early should I call Texas811 for a Shallowater bore along Clovis Road?

The person arranging excavation should request a Texas811 locate for the Clovis Road bore at least 48 hours before work, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore in Shallowater near US 84?

The route and scope determine the price, not one single detail. Acuff clay loam, bore length and pipe or conduit size affect the drilling work; US 84, BNSF Railway and utility crossings add planning needs. Concrete, pits, excavator time, backfill, creek or drainage conditions, emergency scope and the 362 road miles from Yukon can also affect mobilization and labor.

Where the Shallowater facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Shallowater

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Shallowater, Texas

Type the address of your job in Shallowater. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Shallowater

Same county: Slaton · Idalou · Ransom Canyon · Buffalo Springs Lake. All counties: Texas county list.