Deerwood Texas Directional Boring: Conroe Soil, Milam Branch And BNSF Railway
Quick Answer: Deerwood is an unincorporated community, and we do directional boring, also called horizontal directional drilling (HDD), for routes near Texas State Highway 105. The Yukon, Oklahoma main office is 428 road miles away, with Conroe 11.0 miles west of Deerwood. The USDA soil survey maps clay at about 40 inches across 38 percent of the area, so crews plan for sticky material that can grip pipe. Forest Road and Milam Branch are local route features to check during bore planning.
Deerwood bores at a glance
- Unincorporated community in Montgomery County, Texas. Population 1,745 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 428 miles, about 8.3 hours of driving.
- Ground: Conroe soil is mapped on 38 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 105.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Milam Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can do directional boring near Forest Road in Deerwood?
Deerwood is an unincorporated community in Montgomery County, so it has no city government to own its streets; we take directional boring work along Forest Road and other local routes. The Census Bureau counted 1,745 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, including service routes that connect properties along Forest Road or Holly Glen.
Our main office is in Yukon, Oklahoma, and Deerwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982. For a Deerwood route such as Hill Top, our equipment range covers 3/4 inch service lines up to 48 inch casing and bores from 10 feet to 5,000 feet.

What is Deerwood ground like near Conroe soil?
The USDA soil survey maps Conroe soil across 38 percent of Deerwood, with loamy fine sand common at the surface and clay or other finer material below. At about 40 inches, clay is mapped under 38 percent of the area, while silt loam accounts for 29 percent and sandy clay loam for 24 percent. These mapped patterns are not test borings. A bore near Forest Road can meet a change from easier cutting surface material to finer, stickier soil that needs controlled fluid and staged reaming.
| USDA soil survey, inside the Deerwood mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Conroe 38 percent, Sorter 29 percent, Lilbert 24 percent and Segno 6 percent |
| Texture at the surface | loamy fine sand 59 percent, silt loam 29 percent and fine sandy loam 7 percent |
| Texture about 40 inches down | clay 38 percent, silt loam 29 percent and sandy clay loam 24 percent |
| Engineering class about 40 inches down | clayey sand (SC) 59 percent, silt (ML) 29 percent and lean clay (CL) 12 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 70 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 70 percent of the area |
Bedrock is not mapped in Deerwood’s top five feet, though that does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 70 percent of the area, so pits near Milam Branch may need pumping and careful placement. Flood prone soils are not mapped in Deerwood, so we check site conditions as we plan each boring path. High steel corrosion risk covers 70 percent of the mapped area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The geologic map unit is Alluvial pebble gravel and sand, of Gelasian age.
How do crews handle Deerwood clay near Forest Road?
At about 40 inches, Deerwood has mapped clay and silt loam, so our crews adjust fluid and reaming to the ground rather than treating every stretch of Forest Road alike.
- Where Deerwood clay is encountered at depth, we use thinner drilling fluid with polymer, open the hole in stages and pull pipe without leaving the hole open.
- Near Forest Road, mapped silt loam can soften when wet, so we keep fluid pressure low under pavement and watch steering response.
- The loamy fine sand mapped across Deerwood can cave behind the bit; staged reaming and a prepared pipe help keep the hole supported.
- With a seasonal water table mapped within 60 inches across 70 percent of Deerwood, crews keep pits small and pump water when needed.

Where might a Deerwood line pass under Texas State Highway 105?
Texas State Highway 105 is 0.6 miles outside Deerwood’s mapped community boundary, and no highway is mapped inside it. If a route needs to cross the highway, a bore can pass below the pavement rather than cutting across it. Inside Deerwood, Forest Road is the longest named street at 1.13 miles, followed by Hill Top at 0.74 miles and Holly Glen and Drowsy Pines at 0.6 miles each. Those streets give route planners specific alignments to check for pavement, driveways and buried lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 105 | Highway nearby | 0.6 miles outside | State highway office |
| BNSF Railway | Railroad nearby | 0 miles outside | The railroad |
| Milam Branch | Stream | 0.66 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Fork Spring Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Caney Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Cagle Branch | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway runs along or touches Deerwood’s boundary, while no street and rail crossing is mapped inside the community. A crossing of that track needs an agreement from BNSF Railway, with its terms setting the crossing details. Milam Branch has 0.66 channel miles inside Deerwood, and five mapped street crossings of named streams are present. No lakes or ponds are mapped within one mile of Deerwood, so we identify no mapped lake or pond crossing in that area. A creek route needs planning for the channel and a check for federal waterway jurisdiction.
Who permits a Deerwood bore in Montgomery County?
Montgomery County has no city government for Deerwood, so county or state authority depends on the route; Texas State Highway 105 work in its right of way goes through TxDOT. The TxDOT Houston District reviews the utility owner’s application in the online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that owner. At highway crossings, required cover depends on line type and the permitted plan. A route touching BNSF Railway also needs the railroad’s crossing agreement, and Milam Branch is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve addresses in Deerwood, Montgomery County?
The water provider for a specific Deerwood address has to be confirmed with the city, the county or the local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the provider cannot be matched by place name. Montgomery County electric service is reported by CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative. For conduit near Forest Road, we confirm the line owner at the address before planning the bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative | Electric utilities reporting service in Montgomery County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Deerwood’s median housing year at 2005; 80 percent of homes were built in 2000 or later, and 20 percent from 1960 to 1999. That mix can mean both new service connections and replacement work along streets such as Hill Top. Before drilling near a marked line, our crews use hydrovac potholing to expose it; paint shows position, not depth. Confirming the water provider and electric line owner helps identify what must be exposed.

How far is Deerwood from Cut and Shoot and our Yukon office?
Deerwood is in Montgomery County, covers 0.57 square miles and sits at an elevation of 191 feet. ZIP code 77306 serves the community. Cut and Shoot is 3.0 miles northwest, and Grangerland is 4.6 miles south. Conroe, the county seat and nearest larger city, is 11.0 miles west. The Yukon, Oklahoma main office is 428 road miles away, an 8.3 hour drive. That distance is part of planning mobilization for a bore near Forest Road or Milam Branch.
Places near Deerwood
- Directional boring in Cut and Shoot: 3 miles northwest
- Directional boring in Grangerland: 4.6 miles south
- Directional boring in Woodloch: 9.5 miles southwest
- Directional boring in Splendora: 10.2 miles southeast
- Directional boring in Conroe: 11 miles west
What boring work comes up near Milam Branch in Deerwood?
- Highway crossing: A route from Deerwood toward Texas State Highway 105 needs a bore plan that keeps the existing pavement uncut.
- Water service: A connection near Forest Road needs the address specific water provider confirmed before the bore route is set.
- Fiber conduit: A fiber route along Hill Top needs marked utilities exposed before drilling near them.
- Creek crossing: A route beneath Milam Branch needs channel depth planning and a check for Corps jurisdiction.
- Rail crossing: A line near Deerwood’s boundary with BNSF Railway needs the railroad’s crossing agreement before the route is set.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Drowsy Pines in Deerwood?
For a Deerwood quote, tell us where the route is, what will go underground, the pipe or conduit size and the footage. A map pin on Drowsy Pines helps identify the access and nearby streets. A sketch or plans can show whether the route approaches Milam Branch, a driveway or another line, which helps us scope the bore.
The price reflects the job details around Deerwood, not footage alone. Ground conditions such as Conroe soil affect drilling and fluid needs. Crossings and exposures matter too, including Texas State Highway 105, BNSF Railway, concrete, pavement and Milam Branch. Pit size, excavator time and sand backfill can change the work. Mobilization also reflects the 428 road miles from Yukon, while high profile or emergency scheduling adds planning demands.
Questions people ask about boring in Deerwood
Does Trinity take directional boring work in Deerwood, Montgomery County?
Yes. We take directional boring work in Deerwood, and Trinity manages the job from the first call through the bore log. Work is staffed with our own crews or partner drilling contractors Trinity has vetted, including work planned near Forest Road. Our main office is in Yukon, Oklahoma, rather than in Deerwood.
Who owns electric lines in Deerwood, Montgomery County, and who confirms conduit specs?
The line owner depends on the Deerwood address, so we confirm it before planning an electric conduit bore. CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report service in Montgomery County. The owner of the line near Holly Glen can confirm its conduit requirements.
Does Montgomery County or a city control Holly Glen in Deerwood, and can we avoid cutting it?
Deerwood is unincorporated, so it has no city government; street authority is county or state depending on the road. A bore along or beneath Holly Glen can leave the street surface uncut, with entry and exit pits placed off the crossing. A route in state highway right of way is handled through TxDOT.
Are buried lines near Hill Top in Deerwood old enough to need replacement bores?
The American Community Survey 2019 to 2023 estimates give Deerwood a median housing year of 2005, with 20 percent of homes built from 1960 to 1999 and 80 percent in 2000 or later. That does not date each buried line. A replacement bore near Hill Top should be planned after locating and exposing marked utilities.
Can groundwater or flood prone ground affect bore pits near Milam Branch in Deerwood?
Yes, groundwater can affect pit work: the USDA soil survey maps a seasonal water table within 60 inches across 70 percent of Deerwood. Crews may need smaller pits and pumping near Milam Branch. Flood prone soils are not mapped, but a stream crossing still needs depth planning and a jurisdiction check.
Does Conroe soil in Deerwood corrode steel, and what pipe can a bore use?
The USDA soil survey maps high steel corrosion risk across 70 percent of Deerwood, including areas with Conroe soil. For Deerwood work, we leave steel casing or tracer wire coating selection to the line owner and coordinate our installation accordingly. HDPE is another pipe option and is not affected by soil corrosion. The material choice should match the line owner’s design.
What bore sizes and lengths can Trinity handle near Drowsy Pines in Deerwood?
For a route near Drowsy Pines, our equipment range runs from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet. The pipe size, footage and ground conditions determine the setup. Mapped clay and loamy fine sand in Deerwood can call for different drilling approaches.
How much notice does Texas811 need for a Deerwood bore near Forest Road?
For work near Forest Road, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If the start moves beyond the ticket’s 14 day window, submit a new request. When marks wear off or move in Deerwood, we request refreshed marks through Texas811 before we continue work.
What affects the price of a directional bore under Texas State Highway 105 near Deerwood?
Price depends on the route and scope near Deerwood, including bore length, pipe size, soil, exposed utilities and pavement. A Texas State Highway 105 crossing adds permit planning, and a route near BNSF Railway or Milam Branch brings other crossing considerations. Pit work, equipment time and the 428 road miles from Yukon also affect mobilization.
Where the Deerwood facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Deerwood
- U.S. Census Bureau, TIGER/Line 2024: Deerwood boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Deerwood population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Deerwood housing units and year built
- Macrostrat geologic map compilation: map units under Deerwood
- U.S. Department of Transportation, North American Rail Network: track owners in Montgomery County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Montgomery County
- U.S. Geological Survey, Elevation Point Query Service: Deerwood elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Deerwood
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Deerwood
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Deerwood, Texas
Type the address of your job in Deerwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Deerwood
Same county: The Woodlands · Willis · Magnolia · Houston · Pinehurst · Shenandoah · Oak Ridge North · Montgomery · Panorama Village · Roman Forest · Patton Village · Porter Heights. All counties: Texas county list.
