trinityboringsolutions.com

Porter Heights Texas Directional Boring: Sorter Soil, Texas State Highway 99 and Copeland Ditch

Quick Answer: Before a Porter Heights bore, confirm the water provider for the address and identify the electric line owner; CenterPoint Energy and other utilities report service in Montgomery County. Along Texas State Highway 99, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work to install lines without cutting pavement. The Yukon, Oklahoma main office is 438 road miles away, a factor to weigh alongside a route near Copeland Ditch. USDA maps show Sorter soil across 48% of the area, so the ground profile helps determine the reaming and fluid plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Porter Heights bores at a glance

  • Unincorporated community in Montgomery County, Texas. Population 1,903 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 438 miles, about 8.6 hours of driving.
  • Ground: Sorter soil is mapped on 48 percent of the area, with very fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 99 and FM 1314. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring by Texas State Highway 99 in Porter Heights?

Trinity Boring Solutions handles directional boring in Porter Heights, where the water provider and electric line owner must be identified before a route is set. The 2020 Census counted 1,903 people in this unincorporated Montgomery County community. We install water, sewer, gas, electric conduit and fiber, including routes along Old Houston Road and Alexander Lane where open cuts could disrupt access.

Our main office is in Yukon, Oklahoma, and Porter Heights work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982. Our 3/4 inch service line to 48 inch casing range can suit a service along Porter Lane or a larger planned utility route.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Sorter soil like to bore in Porter Heights?

Sorter soil is the leading mapped soil series in Porter Heights, covering 48% of the area in the USDA soil survey. At about 40 inches below the surface, the survey maps very fine sandy loam across 48%, loam across 35% and clay across 13%; average clay content at that depth is 19%. Sandy ground is mapped across only 1% at that depth. These are mapped patterns, not test borings, so a route near Porter Lane still needs site specific planning.

USDA soil survey, inside the Porter Heights mapped community boundaryWhat is mapped
Soil series mappedSorter 48 percent, Splendora 14 percent, Segno 9 percent, Waller 9 percent and Kaman 7 percent
Texture at the surfacevery fine sandy loam 51 percent, fine sandy loam 29 percent and silt loam 9 percent
Texture about 40 inches downvery fine sandy loam 48 percent, loam 35 percent and clay 13 percent
Engineering class about 40 inches downsilt (ML) 48 percent, lean clay (CL) 35 percent and fat clay (CH) 13 percent
Average clay content about 40 inches down19 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches88 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel87 percent of the area
Mapped as urban land (disturbed fill)1 percent of the area

The USDA soil survey maps a seasonal water table within 60 inches across 88% of Porter Heights, so excavation pits along Old Houston Road may need pumping and careful sizing. Flood prone soils cover 9%, a factor near drainage routes. High steel corrosion risk is mapped across 87%, so the line owner should consider casing and tracer wire materials; HDPE avoids the steel corrosion concern. For Porter Heights work, we account for the Sorter soil series while recognizing bedrock is not mapped in the top five feet. The geologic map identifies Pleistocene colluvial and alluvial gravel, sand, silt, and clay, which can vary along a bore route.

How do crews bore very fine sandy loam in Porter Heights?

In Porter Heights, we match the bore plan to the mapped very fine sandy loam and the wet ground conditions. The USDA map guides planning, while the actual route and returns guide the work.

  1. Sorter soil and very fine sandy loam can cut quickly, so we control fluid use to avoid washing out softer ground along an Old Houston Road route.
  2. With seasonal water tables mapped within 60 inches across much of Porter Heights, we keep pits manageable and pump water when needed near Alexander Lane.
  3. Before the drill nears a marked utility on a Porter Heights bore path, we expose it with hydrovac because surface marks show position, not depth.
  4. We track the drill head from the surface and record depth and pitch as it advances, checking alignment through changing soil near FM 1314.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross near Copeland Ditch in Porter Heights?

Texas State Highway 99 and FM 1314 run inside the mapped Porter Heights community boundary, so a route under either state road needs highway planning. Old Houston Road is the longest named street at 2.02 miles inside the community; Alexander Lane runs 1.3 miles and Porter Lane 1.28 miles. Those streets offer possible routes for utility work, but each address and crossing point has to be checked against the proposed bore path.

CrossingTypeMapped extentWho has a say
Texas State Highway 99State highway2.4 roadway miles insideState highway office
FM 1314State highway2.2 roadway miles insideState highway office
Copeland DitchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
White Oak CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Maple SloughStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Mirror LakeLake or pond18 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Porter Heights or within 1 mile outside its boundary, and public records map no street and rail crossings inside the community. No named stream is mapped inside the boundary either. Copeland Ditch lies 0.1 miles away, White Oak Creek 0.2 miles away and Maple Slough 0.9 miles away; unnamed drainage totals 1.17 miles inside. Mirror Lake is within 1 mile, outside the boundary. A planned creek or lake crossing is checked for federal jurisdiction during planning.

Do I need a permit to bore in Montgomery County near Porter Heights?

Porter Heights has no city government, so a street permit belongs to Montgomery County or the state agency responsible for that road. A bore in Texas State Highway 99 or FM 1314 right of way needs a TxDOT utility permit reviewed by the TxDOT Houston District. The utility owner, not our crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application. Cover depths depend on the line type, with the permit able to set a different depth. Copeland Ditch is outside the mapped community boundary, and a planned water crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities own lines in Montgomery County near Porter Heights?

EPA drinking water records do not tie a water provider to specific Porter Heights addresses, so confirm the provider for the address with Montgomery County or the local water district before planning a bore. CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report service in Montgomery County. That list does not identify the owner at every address; confirm the electric line owner before planning conduit along Alexander Lane or another route.

Line ownerWhat it isSourceSize
CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Montgomery CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Porter Heights at 1978; 97% of housing units date from 1960 to 1999 and 3% from 2000 or later. A replacement bore along Alexander Lane may follow an older utility route, while a new service needs a route checked against existing lines. Before drilling near any marked utility, our crews expose it with hydrovac; paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Porter Heights from Spring and our Yukon office?

Porter Heights is an unincorporated community in Montgomery County, at an elevation of 120 feet and covering 3.23 square miles. Its ZIP code is 77365. Spring is 7.0 miles southwest; Oak Ridge North is 7.1 miles west, Woodloch is 7.1 miles northwest and Grangerland is 7.3 miles north. Spring is the nearest larger place, while Conroe, the county seat, is 15.7 miles northwest. The Yukon, Oklahoma yard is 438 road miles away, an 8.6 hour drive, which affects mobilization for work near Texas State Highway 99.

Places near Porter Heights

Which jobs call for a bore near Porter Lane in Porter Heights?

  • Highway crossing: A conduit route under Texas State Highway 99 needs permit and cover planning, with boring rather than cutting through existing pavement.
  • Water service: A service route along Porter Lane can be planned around the confirmed water provider and nearby marked utilities.
  • Fiber route: A fiber bore beside Old Houston Road can avoid open cuts along one of the community’s longest named streets.
  • Drainage crossing: A proposed bore near Copeland Ditch needs a route plan that accounts for the channel and jurisdiction review.
  • Electric conduit: A conduit route near Alexander Lane starts with confirming the line owner among utilities reporting service in Montgomery County.
  • New service: A service near Deuster Lane can use a bore to pass beneath a driveway or other surface without cutting across it.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Deuster Lane in Porter Heights?

For a Porter Heights quote, send a map pin or address because a spot near Deuster Lane may have different access and crossings than one by Copeland Ditch. On Old Houston Road, tell us the material going underground, pipe or conduit size, and footage so we can scope the bore. A sketch or plans help us see the route, surface conditions and nearby obstacles.

The price reflects the full Porter Heights job: bore length and pipe size, the Sorter soil profile, utilities to expose, pavement or concrete, drainage crossings, pits and equipment time. A route under Texas State Highway 99 brings permit and cover planning into the scope, while a crossing near Copeland Ditch can affect the plan. Our mobilization planning accounts for 438 road miles from the Yukon main office to Porter Heights. High profile or emergency work can add requirements.

Questions people ask about boring in Porter Heights

Does Trinity Boring Solutions take directional boring jobs in Montgomery County at Porter Heights, and who staffs them?

Yes, Trinity Boring Solutions takes directional boring work in Porter Heights and across Texas. Our crews handle the work, including crews operating from partner contractor satellite yards that we have vetted. You deal with Trinity from the first call through the bore log, whether the job is near Porter Lane or elsewhere in Montgomery County.

Does TxDOT Houston District handle permits for Texas State Highway 99 in Porter Heights?

TxDOT reviews a utility permit for work in the Texas State Highway 99 right of way through its Houston District. The utility owner files the application in TxDOT’s online RULIS system, while we prepare the bore plan and profile. The permitted cover depends on the line type and the approved crossing plan.

Can a utility line be bored under Copeland Ditch near Porter Heights?

A bore can be planned for a Copeland Ditch crossing, but the channel and route need review before the plan is set. The ditch is 0.1 miles from the mapped community boundary, not inside it. Planned creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who owns the electric lines in Montgomery County at Porter Heights, and who confirms conduit specs?

The electric owner depends on the specific Porter Heights address. CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association, Sam Houston Electric Cooperative and San Bernard Electric Cooperative report service in Montgomery County. Confirm the owner and conduit requirements for the planned route, such as one along Alexander Lane, before design.

Who controls Porter Lane in Porter Heights, and does a bore require cutting the street?

Porter Heights has no city government, so street responsibility belongs to Montgomery County or the state, depending on the road. A bore can pass beneath Porter Lane without an open cut when the route and permissions allow. Texas State Highway 99 is different: work in its right of way needs a TxDOT utility permit.

How old are Porter Heights homes and buried lines near Alexander Lane, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Porter Heights at 1978, with 97% of units built from 1960 to 1999. That does not establish the age of a buried line near Alexander Lane. A replacement route needs its existing utilities located and exposed before drilling near them.

What bore sizes and lengths can Trinity handle for a Porter Heights job near Deuster Lane?

For a Porter Heights project near Deuster Lane, Trinity handles lines from 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The suitable setup depends on the route, line material and ground conditions, including the mapped Sorter soil.

How much notice does Texas811 need for a Porter Heights bore along Old Houston Road, and what if marks move?

For work along Old Houston Road, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, make a new request. We resume boring near White Oak Creek only after worn or moved marks are refreshed through Texas811.

What affects the cost of directional boring under Texas State Highway 99 in Porter Heights?

The price for a Texas State Highway 99 bore depends on length, pipe or conduit size, ground conditions, utility exposures, pavement, drainage crossings, pits and equipment time. A state right of way adds permit planning, and Porter Heights is 438 road miles from the Yukon yard, so mobilization is part of the job scope.

Where the Porter Heights facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Porter Heights

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Porter Heights, Texas

Type the address of your job in Porter Heights. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Porter Heights

Same county: Conroe · The Woodlands · Willis · Magnolia · Houston · Pinehurst · Montgomery · Panorama Village · Roman Forest · Splendora · Patton Village · Woodbranch. All counties: Texas county list.