trinityboringsolutions.com

Montague Texas Directional Boring: Windthorst Soil, Salt Creek, Highway 59

Quick Answer: Our Yukon main office is 157 road miles from Montague, and Salt Street work is staffed by our own crews or vetted drilling partners. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes under Texas State Highway 59. Windthorst soil is common here, and sandy clay loam below the surface can make reaming and fluid control important. A route near Salt Creek needs its own crossing plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Montague bores at a glance

  • County seat of Montague County, Texas. Population 261 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 157 miles, about 3.4 hours of driving.
  • Ground: Windthorst soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 12 percent of the area.
  • Highways inside the boundary: Texas State Highway 59, FM 455, Texas State Highway 175 and FM 1806. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Salt Creek and Ritchie Creek.
  • Public water: Montague Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Salt Creek in Montague?

At 157 road miles from our Yukon office, Montague directional boring is handled by Trinity crews or vetted drilling partners. The Census Bureau counted 261 people in Montague in the 2020 Census. We install water, sewer, gas, electric conduit and fiber along routes such as Morris Street or near Salt Creek, with the path planned around marked utilities and the ground.

Our main office is in Yukon, Oklahoma, and Montague work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring since 1982. Our record of no utility strikes in over 25 years matters around Montague Water System lines and electric service reported in Montague County.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Windthorst soil like to bore in Montague?

Windthorst is the most common mapped soil series in Montague, covering 35% of the community. The USDA soil survey maps Windthorst fine sandy loam on 14% of the area. At about 40 inches below the surface, sandy clay loam is mapped under 51% of Montague, and average clay content at that depth is 33%. Heavy clay is mapped on 38% of the area at that depth, while sandy ground accounts for 12%. These mapped patterns help us plan, but they are not test borings.

USDA soil survey, inside the Montague mapped community boundaryWhat is mapped
Soil series mappedWindthorst 35 percent, Selden 14 percent, Cona 14 percent, Duffau 13 percent and Chaney 12 percent
Texture at the surfacefine sandy loam 57 percent, fine sand 14 percent and stony sandy loam 14 percent
Texture about 40 inches downsandy clay loam 51 percent, channery clay 14 percent and sandy clay 12 percent
Engineering class about 40 inches downlean clay (CL) 74 percent, fat clay (CH) 14 percent and silty clay (CL ML) 12 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inches12 percent of the area (0 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches14 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel40 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches on 12% of Montague, with typical bedrock depth at 52 inches, so some routes may drill more slowly at that contact. Seasonal water tables are mapped within 60 inches on 14%, and flood prone soils cover 12%, which can affect pits near Salt Creek. High steel corrosion risk is mapped on 40%, so the line owner considers casing and tracer wire materials; HDPE is not subject to soil corrosion. The map also lists Quartz Sand Decomposition Residuum of Cenozoic age and Antlers Sand of Aptian age.

How do we drill Montague’s sandy clay loam along Salt Creek?

In Montague’s sandy clay loam, we manage the drilling fluid and open the hole in stages so the clay does not build up on the reamer or grip the pipe.

  1. Windthorst soil is commonly mapped here, so we adjust fluid and reaming stages for sticky sandy clay loam rather than forcing the pipe through a tight hole.
  2. Where the soil survey maps sandy ground near a Morris Street route, we use staged reaming and keep the pipe ready for the final pull.
  3. Before drilling near a marked service on Hall Street, we hydrovac expose it because locate paint shows position but not depth.
  4. We track the drill head from the surface and log depth and pitch as a Salt Creek crossing advances.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads and creeks can a Montague bore cross near Texas State Highway 59?

A Montague bore can pass beneath Texas State Highway 59, FM 455, Texas State Highway 175 or FM 1806, all mapped inside the community. Existing highway pavement is crossed by boring or tunneling rather than open trenching. TxDOT sets the permitted route and cover. Morris Street is the longest named street at 0.76 miles, followed by Hall Street at 0.7 miles and Salt Street at 0.63 miles. Those street routes need utility checks before we set a bore path.

CrossingTypeMapped extentWho has a say
Texas State Highway 59State highway3.2 roadway miles insideState highway office
FM 455State highway1 roadway miles insideState highway office
Texas State Highway 175State highway0.8 roadway miles insideState highway office
FM 1806State highway0.5 roadway miles insideState highway office
Salt CreekStream1.85 channel miles insideChecked for Corps of Engineers jurisdiction
Ritchie CreekStream1.67 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Montague community boundary or within one mile outside it, and none is mapped at a street crossing. Salt Creek runs 1.85 channel miles inside the community, and Ritchie Creek runs 1.67 miles; eight mapped street crossings meet named streams. With Morris Street as a reference, we confirm no lakes or ponds are mapped within one mile before planning underground work. A creek route needs channel depth planning, and Corps jurisdiction is checked during planning.

Who approves a Montague bore in Montague County?

For Montague streets, there is no city government because the place is an unincorporated community; county or state authority depends on the road. A bore in Texas State Highway 59, FM 455, Texas State Highway 175 or FM 1806 right of way needs a TxDOT utility permit reviewed by the Wichita Falls District. The utility owner applies through RULIS, and we prepare the bore plan and profile for its application. TxDOT cover rules guide the design, though the district can require a different depth. A Salt Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Montague Water System in Montague?

Montague Water System is a private groundwater system serving 540 people through 180 service connections. Its wells and connections are useful route clues, but the line owner still needs confirmation at the specific Morris Street address before a bore. Electric service reported in Montague County includes Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative; we confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Montague Water SystemPublic water systemGroundwater wells180 connections, 540 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric CooperativeElectric utilities reporting service in Montague CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Montague’s median housing year at 1973; 30% of homes were built before 1960, 64% from 1960 to 1999 and 6% in 2000 or later. A replacement route on Hall Street may need to account for older buried services as well as a new connection. We hydrovac marked utilities on the bore path before drilling near them, since surface paint does not show depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Montague and nearby Bowie?

Montague is the county seat of Montague County, at an elevation of 1,068 feet and covering 1.28 square miles. ZIP code 76251 serves the community. Nocona is 8.2 miles north, Bowie is 10.4 miles southwest, and St. Jo is 11.6 miles east. Bowie is the nearest larger city. Our Yukon, Oklahoma main office is 157 road miles away, a 3.4 hour drive, so distance is part of planning mobilization for work near Salt Creek or Texas State Highway 59.

Places near Montague

What kinds of bores come up near Salt Street in Montague?

  • Highway crossing: A bore beneath Texas State Highway 59 keeps the line below pavement and follows the TxDOT permitted profile.
  • Water service: A new connection near Montague Water System can be routed around marked groundwater service lines.
  • Fiber route: A fiber conduit along Salt Street can avoid open cuts across the street surface and driveways.
  • Creek crossing: A Salt Creek bore needs a profile planned below the channel and a jurisdiction check.
  • Sewer replacement: A route near Hall Street can replace an older service without opening the street along its full length.
  • Electric conduit: Near Morris Street, we confirm which county reported electric provider owns the line before planning the conduit route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Montague bore near Morris Street?

A map pin matters near Morris Street because the exact route can change which buried lines, pavement or creek channels a bore has to clear. Send the Montague address or pin, what goes underground, the pipe or conduit size and the footage. A sketch or plans help us check access and the route before estimating.

A clear route on fine sandy loam away from Salt Creek may be simpler to plan than a crossing under Texas State Highway 59. The estimate depends on length, pipe size, soil or rock, utilities to expose, pavement, creek crossings, pits and excavator time. The 157 road miles from Yukon can affect mobilization, and emergency or high profile work can add planning demands. The route details determine the scope.

Questions people ask about boring in Montague

Does Trinity take directional boring work in Montague County, and how is the crew assigned?

Yes, Trinity takes directional boring work in Montague County, with Montague jobs handled by our own crews or vetted drilling partners. Our Yukon office is 157 road miles away, so the route and schedule help determine mobilization. For Texas State Highway 59 crossings, we work with Trinity through the bore log, regardless of which crew is on site.

Who is responsible for Salt Street in Montague, and can a bore avoid cutting it?

Montague has no city government, so Salt Street is under county authority rather than a city street department. Directional boring can place a line beneath the street without cutting the pavement. We still need to check the route for marked utilities and any applicable road approval.

What do Montague’s Hall Street housing ages mean for a replacement bore?

Montague’s housing has a median year built of 1973 in the American Community Survey 2019 to 2023 five year estimates. The survey reports 30% built before 1960 and 6% built in 2000 or later. A Hall Street replacement may follow older buried services, so we expose marked utilities before drilling near them.

Could groundwater or flood prone ground affect a Montague bore pit near Salt Creek?

It could. The USDA soil survey maps seasonal water tables within 60 inches on 14% of Montague and flood prone soils on 12%. Near Salt Creek, we plan pits and the bore profile for wet ground, with smaller pits and pumping considered where water collects.

Does Windthorst soil in Montague put steel casing at risk, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk on 40% of Montague, including areas with Windthorst soil. That is a concern for uncoated steel casing and tracer wire, so the line owner chooses any coating. HDPE is unaffected by soil corrosion and may be an option for the line design.

What ground does a Montague bore pass through around Windthorst soil?

Windthorst is mapped across 35% of Montague, and the USDA soil survey maps sandy clay loam under 51% of the area at about 40 inches. Clay content averages 33% at that depth. The mapped soil can hold an open hole but may stick to reamers, so the actual route still guides the drilling plan.

What bore sizes and lengths can Trinity handle near Grand Street in Montague?

For a Montague route near Grand Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, soil and crossings determine the setup. We need the planned line size and footage to assess the job.

How early should I request a locate for Montague work near Morris Street, and what if marks move?

For a Montague bore near Morris Street, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, request a new ticket. Before work continues along Main Street, we have worn or moved marks refreshed through Texas811.

What affects the cost of a Montague bore under Texas State Highway 59?

The route and scope drive the price for a Montague bore under Texas State Highway 59. Length, pipe size, soil or rock, utilities to expose, pavement, creek crossings, pits and excavator time all matter. A highway permit profile or the 157 road miles from Yukon can also affect planning and mobilization.

Where the Montague facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Montague

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Montague, Texas

Type the address of your job in Montague. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Montague

Same county: Ringgold. All counties: Texas county list.