Omaha Texas Directional Boring: Bowie Fine Sandy Loam, US 67, Union Pacific Track
Quick Answer: The City of Omaha groundwater system and Morris County electric providers have lines to identify before we take directional boring, also called horizontal directional drilling (HDD), beneath US 67. From our Yukon, Oklahoma main office, Omaha is 299 road miles away, so access and mobilization matter on routes such as Main Street. Bowie soil is common, while sandy clay loam mapped at about 40 inches can grip pipe during a bore.
Omaha bores at a glance
- Incorporated city in Morris County, Texas. Population 939 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 299 miles, about 5.9 hours of driving.
- Ground: Bowie soil is mapped on 48 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 8 percent of the area.
- Highways inside the boundary: US 67, US 259, FM 144 and Loop 284. State permit office: TxDOT Atlanta District.
- Railroad track inside the boundary: Union Pacific and Union Pacific (line shown as out of service), with 10 mapped street and rail crossings.
- Public water: City of Omaha, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Omaha, Morris County?
Trinity takes directional boring work in Omaha, Morris County, for routes beneath US 67, Main Street and other local streets. The City of Omaha draws public water from groundwater wells, while Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric Cooperative report service in Morris County; confirm the line owner before a bore. The Census Bureau Vintage 2024 estimate puts Omaha at 939 residents. We install water, sewer, gas, electric conduit and fiber along Main Street or across US 259.
Our main office is in Yukon, Oklahoma, and Omaha work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, experience we apply when planning Omaha projects. That experience covers lines from 3/4 inch service lines up to 48 inch casing, useful for the range of work along Main Street.

What kind of ground does Omaha Bowie soil have?
Bowie soil is the leading mapped series in Omaha, covering 48 percent of the city area in the USDA soil survey. Bowie fine sandy loam with 1 to 5 percent slopes covers 34 percent, and Bowie Urban land complex covers 14 percent. At about 40 inches below the surface, sandy clay loam is mapped under 58 percent of the area, while clay is mapped under 26 percent. The survey maps no sandy area at that depth. These are mapped soil patterns, not test borings, so the route still needs to be checked in the field.
| USDA soil survey, inside the Omaha city limits | What is mapped |
|---|---|
| Soil series mapped | Bowie 48 percent, Kullit 17 percent, Kirvin 15 percent, Woodtell 8 percent and Lilbert 6 percent |
| Texture at the surface | fine sandy loam 58 percent, very fine sandy loam 25 percent and loamy fine sand 8 percent |
| Texture about 40 inches down | sandy clay loam 58 percent, clay 26 percent and clay loam 17 percent |
| Engineering class about 40 inches down | lean clay (CL) 57 percent, fat clay (CH) 33 percent and clayey sand (SC) 10 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | 8 percent of the area (0 percent hard rock, 8 percent weathered rock) |
| Seasonal water table within 60 inches | 68 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 79 percent of the area |
The USDA soil survey maps seasonal water tables within 60 inches under 68 percent of Omaha and within 40 inches under 19 percent. Pits near Main Street may need pumping or a smaller footprint. Bedrock is mapped within 60 inches under 8 percent, and that is weathered bedrock; hard bedrock is not mapped at that depth. Flood prone soils cover 1 percent, while high steel corrosion risk is mapped under 79 percent, so the line owner should consider casing and tracer wire materials. The map also shows fine silty clay decomposition residuum of Cenozoic age and the Eocene Reklaw Formation, which includes sandstone and clay.
How is a bore run through Omaha sandy clay loam?
In Omaha, sandy clay loam mapped at about 40 inches calls for controlled fluid and staged reaming so the hole stays workable without pushing pressure toward US 67 pavement.
- Bowie soil maps as fine sandy loam near the surface, with sandy clay loam common at about 40 inches; we match fluid and reaming to the changing ground.
- Clay is mapped under 26 percent of Omaha at about 40 inches, so we watch returns and keep fluid pressure controlled near Main Street pavement.
- Seasonal water tables are mapped within 40 inches under 19 percent of the city; we keep pits compact and pump them if water collects near US 259.
- Before the drill approaches a marked line, we hydrovac pothole it; a utility marked across Sloss Avenue must be exposed because surface paint does not show depth.

Where does a line have to go under Omaha streets or Village Creek?
A route in Omaha may need to pass beneath US 67, US 259, FM 144 or Loop 284, all mapped inside the city limits. TxDOT pavement is bored or tunneled beneath rather than opened by trench. Main Street is the longest named street at 2.58 miles, followed by Daingerfield Street at 1.35 miles and Big League Bend at 0.93 miles. Those streets, along with Sloss Avenue, help define possible service routes and places where the bore plan needs to account for pavement and existing utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 67 | US highway | 1.9 roadway miles inside | State highway office |
| US 259 | US highway | 0.5 roadway miles inside | State highway office |
| FM 144 | State highway | 2.6 roadway miles inside | State highway office |
| Loop 284 | State highway | 0.9 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.96 track miles inside | The railroad |
| Union Pacific (line shown as out of service) | Railroad | 0.31 track miles inside | The railroad |
| Village Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Glass Club Lake | Lake or pond | 42 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific track runs 1.96 miles through Omaha, with another 0.31 miles mapped as out of service; the city has 10 mapped street and rail crossings. No named stream crosses city streets in the mapping, but Village Creek is 0.3 miles from the limits and unnamed drainage totals 2.18 miles inside them. Glass Club Lake, a 42 acre lake, is within one mile outside the city. A planned water crossing near Village Creek needs a jurisdiction check during planning.
Whose permission does an Omaha bore near Union Pacific need?
For a bore in the right of way of US 67, US 259, FM 144 or Loop 284, TxDOT utility permission is needed, with review by the TxDOT Atlanta District for Morris County. The utility owner files in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, and the required cover depends on the line type and location. Because Omaha is incorporated, we treat its city streets as city owned when planning a boring route. A crossing of Union Pacific track needs an agreement from the railroad, and a crossing near Village Creek is checked for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Omaha water system?
The City of Omaha owns the public water system, which uses groundwater wells and reports 559 service connections serving 1,700 people. Electric service reported in Morris County includes Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric Cooperative. Those county records do not identify the provider at every address, so we confirm the electric line owner before planning a conduit bore near Main Street or US 67.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Omaha | Public water system | Groundwater wells | 559 connections, 1,700 people served |
| Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Morris County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Omaha’s median housing year at 1973; 21 percent of homes were built before 1960, 69 percent from 1960 to 1999 and 10 percent in 2000 or later. Work along older Main Street services may involve replacement lines, while newer areas can call for added connections. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows where a line runs, not its depth. For example, a marked line crossing Sloss Avenue must be exposed before the drill approaches.

How far is Omaha from Mount Pleasant and our Yukon yard?
Omaha is an incorporated city in Morris County, at an elevation of 392 feet and covering 1.45 square miles. Its ZIP code is 75571. Naples is 3.7 miles east, Daingerfield is 10.5 miles south, and Marietta is 11.4 miles east. Mount Pleasant, the nearest larger city, is 13.8 miles west; Daingerfield is the county seat. The Yukon yard is 299 road miles away, a 5.9 hour drive, so distance can affect mobilization for a bore on US 67 or a service route near Naples.
Places near Omaha
- Directional boring in Naples: 3.7 miles east
- Directional boring in Daingerfield: 10.5 miles south
- Directional boring in Marietta: 11.4 miles east
- Directional boring in Mount Pleasant: 13.8 miles west
- Directional boring in Hughes Springs: 14.2 miles southeast
What boring work comes up on Omaha Main Street?
- Highway crossing: A bore beneath US 67 keeps the line under the roadway rather than cutting through the pavement.
- Water service: A new connection near the City of Omaha system needs a route that ties into groundwater well service lines.
- Street utility: A bore along Main Street can carry water, sewer, gas, electric conduit or fiber beneath existing pavement.
- Rail crossing: A utility route under the 1.96 miles of Union Pacific track needs the railroad’s crossing agreement.
- Drainage crossing: A route near Village Creek needs planning for the channel and a jurisdiction check.
- Neighborhood service: A connection near Big League Bend can be bored beneath the street with entry and exit pits in dirt.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of an Omaha bore near Sloss Avenue?
For Omaha quotes, we need the address or map pin, what is going in the ground, pipe or conduit size and footage; sketches or plans help. On Sloss Avenue, the route and nearby marked lines can change the work more than the street name alone. Plans showing pavement, drainage or a Union Pacific crossing help us assess the bore path.
The job details determine the price: length and pipe size, Omaha’s sandy clay loam and clay, utility exposures, pavement, drainage crossings, pits, excavator time and backfill all affect the scope. A route near US 67 brings highway right of way and cover requirements into planning, while a Union Pacific crossing adds railroad coordination. Omaha’s 299 road miles from Yukon also affect mobilization. Emergency or high profile work can add planning demands.
Questions people ask about boring in Omaha
Does Trinity take directional boring jobs in Omaha, Morris County, and how are crews assigned?
Yes, we take directional boring work in Omaha and across Texas. Our own crews handle jobs, and partner drilling contractors we have vetted can work from satellite yards. You deal with Trinity from the first call through the bore log, whichever crew is on site, including for a route along Main Street.
Does Bowie soil in Omaha create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk under 79 percent of Omaha, including areas with Bowie soil. The line owner should weigh that risk when selecting steel casing or tracer wire materials. HDPE is not affected by soil corrosion, but the pipe choice belongs to the line owner and the job design.
What ground does a bore pass through in Omaha’s Bowie soil?
Bowie is the most common mapped soil series in Omaha, covering 48 percent of the area. The USDA soil survey maps sandy clay loam under 58 percent at about 40 inches, with clay under 26 percent. Those are survey patterns rather than test borings, so the actual route needs field assessment.
Will an Omaha bore hit rock, and how much bedrock is mapped nearby?
Bedrock is mapped within 60 inches under 8 percent of Omaha, and the mapped material is weathered; hard bedrock is not mapped at that depth. This does not rule out rock below five feet. The Eocene Reklaw Formation includes sandstone and clay, so a route still needs to account for local ground changes.
Who approves an Omaha bore beneath US 67, and which state office reviews it?
TxDOT reviews a utility permit for work in the US 67 right of way through the TxDOT Atlanta District. The utility owner files the application in RULIS, and we provide the bore plan and profile for that filing. A line beneath existing highway pavement is installed by boring or tunneling.
What does an Omaha bore under Union Pacific track need?
A crossing beneath the Union Pacific track in Omaha needs an agreement from the railroad that owns it. For Omaha crossing plans, that agreement sets conditions for casing, depth and flagging before we schedule boring work. If the line also occupies highway right of way near US 67, TxDOT asks for a copy of the railroad agreement.
Can I reach Trinity after hours about an urgent bore near Big League Bend in Omaha?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. Tell us whether the urgent work is near Big League Bend, US 259 or another Omaha location, and what line needs attention. Trinity also provides 24 hour emergency response for directional boring work.
How much Texas811 notice does an Omaha bore along Main Street need, and what if marks move?
For a Main Street bore, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If an Omaha start slips more than 14 days past the original notice, we submit a new request before work proceeds. Before work continues in Omaha, we refresh worn or moved marks through Texas811 to keep our boring plan aligned with marked routes.
What affects the cost of directional boring near US 67 in Omaha?
Length, pipe size, the Bowie soil and clay, utility exposures, pavement, drainage crossings, pits and backfill all affect the job. A US 67 route brings right of way planning into the scope, while a Union Pacific crossing adds coordination. Omaha’s distance from Yukon also affects mobilization; the final price depends on the actual route and work.
Where the Omaha facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Omaha
- U.S. Census Bureau, TIGER/Line 2024: Omaha boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Omaha
- U.S. Census Bureau, American Community Survey 2019 to 2023: Omaha housing units and year built
- Macrostrat geologic map compilation: map units under Omaha
- U.S. EPA Safe Drinking Water Information System: public water systems serving Omaha
- U.S. Department of Transportation, North American Rail Network: track owners in Morris County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Morris County
- U.S. Geological Survey, Elevation Point Query Service: Omaha elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Omaha
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Omaha
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Omaha, Texas
Type the address of your job in Omaha. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Omaha
Same county: Lone Star. All counties: Texas county list.
