Ringgold Texas Directional Boring: Stoneburg Soil, Union Pacific Track and US 81
Quick Answer: Stoneburg soil is common around Ringgold, and clay can stick to the tooling and grip a pipe. We take directional boring, also called horizontal directional drilling (HDD), for lines crossing US 81, US 82 or Union Pacific track. Ringgold is 136 road miles from our Yukon yard, with Hanson Road among the routes a bore may follow. The USDA soil survey maps bedrock within 40 inches across 52 percent of the community, so route depth matters.
Ringgold bores at a glance
- Unincorporated community in Montague County, Texas. Population 146 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 136 miles, about 3 hours of driving.
- Ground: Stoneburg soil is mapped on 46 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 52 percent of the area.
- Highways inside the boundary: US 81, US 82 and Loop 19. State permit office: TxDOT Wichita Falls District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring on Hanson Road in Ringgold?
We take directional boring work in Ringgold, Montague County, including alignments beside Hanson Road. Stoneburg soil is widespread here, so sticky clay can affect reaming and pipe pullback. The Census Bureau’s 2020 Census count puts the community population at 146. Water, sewer, gas, electric conduit and fiber lines can run along Hanson Road, Cook Road or Blackman Road, depending on the route and service need.
Our main office is in Yukon, Oklahoma, and Ringgold work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa. A typical Ringgold job is much shorter, such as a service route along Cook Road, but the soil and crossings still shape the plan. Our family business began in 1965, and since 1982 we have done directional boring; we apply that experience when planning Ringgold work.

What does the USDA survey show about Stoneburg soil in Ringgold?
The USDA soil survey maps Stoneburg soil across 46 percent of Ringgold, with fine sandy loam at the surface across 71 percent of the mapped area. Fine sandy loam can cut readily, but the material below it changes the drilling conditions. At about 40 inches, the survey maps bedrock across 46 percent, clay across 25 percent and sandy clay loam across 25 percent. It maps no sandy area at that depth. These are mapped patterns, not test borings, so a specific Hanson Road alignment still needs site planning.
| USDA soil survey, inside the Ringgold mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Stoneburg 46 percent, Anocon 25 percent, Renfrow 19 percent, Vernon 6 percent and Waurika 4 percent |
| Texture at the surface | fine sandy loam 71 percent, loam 19 percent and clay 6 percent |
| Texture about 40 inches down | bedrock 46 percent, clay 25 percent and sandy clay loam 25 percent |
| Engineering class about 40 inches down | lean clay (CL) 35 percent and fat clay (CH) 19 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | 52 percent of the area (46 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 29 percent of the area |
Bedrock is mapped within 40 inches across 52 percent of Ringgold, with a typical mapped depth of 34 inches; 46 percent is hard bedrock within 60 inches and 6 percent is weathered bedrock. A route may need slower rock drilling, especially at a soil to rock contact. Seasonal water table is mapped within 60 inches across 4 percent, and flood prone soils are not mapped. High steel corrosion risk covers 29 percent. The Nocona Formation, of Cisuralian age, includes mudstone, sandstone, siltstone and conglomerate, so ground conditions can vary along a bore.
How do crews bore Ringgold routes where bedrock is shallow?
We plan Ringgold bores around Stoneburg soil and the shallow bedrock mapped beneath the community. A route near Hanson Road may call for staged reaming in clay or slower drilling where rock is encountered.
- Clay plan: Stoneburg soil can cling to a reamer, so we use thinner drilling fluid with polymer and work through staged reaming before pulling pipe.
- Rock plan: With bedrock mapped at typical depth of 34 inches, we allow for slower drilling and adjust the approach if a route meets hard rock.
- Utility checks: Before drilling near marked lines along Cook Road, we hydrovac pothole them because locate paint shows position, not depth.
- Tracking: At a Blackman Road bore, a walkover locator tracks the drill head from the surface while we record depth and pitch.

Where might a Ringgold bore pass under Beaver Creek?
Ringgold has US 81, US 82 and Loop 19 within the mapped community boundary, so a route touching their right of way needs highway planning. Hanson Road is the longest named street at 1.14 miles, followed by Cook Road at 1.07 miles and Blackman Road at 0.73 miles. Those roads give useful route references, but the bore path and the specific crossing determine the work. There are 11.35 public road centerline miles in the community, so a short utility connection can still cross more than one kind of corridor.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 81 | US highway | 1.3 roadway miles inside | State highway office |
| US 82 | US highway | 1.3 roadway miles inside | State highway office |
| Loop 19 | State highway | 0.9 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.16 track miles inside | The railroad |
| Beaver Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.16 track miles within Ringgold on the Duncan Subdivision, and two street and rail crossings are mapped in the community. A bore near the track needs coordination with the railroad that owns it. No named stream is mapped inside the boundary; Beaver Creek is 0.6 miles outside it. The map also shows 1.47 miles of unnamed drainage and no mapped street crossings of named streams, so a drainage route still needs attention even when it is not a named creek.
Who approves a Ringgold bore in Montague County?
Ringgold has no city government, so a street bore on Blackman Road or Cook Road is handled by the county or, on a state route, by TxDOT. For work in the right of way of US 81, US 82 or Loop 19, the utility owner files the application in TxDOT’s RULIS system; we provide the bore plan and profile, and the Wichita Falls District reviews it. TxDOT cover rules set 60 inches below the lowest crossed grade for electric and communication lines and water lines, and for pressurized sewer crossings. When a Ringgold permit sets a different depth, we follow the permitted depth before proceeding with the bore. A Union Pacific track crossing needs the railroad owner’s agreement, and Beaver Creek jurisdiction is checked during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns utility lines serving Ringgold in Montague County?
The water provider for a specific Ringgold address must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not identify a provider for this community. Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative report electric service in Montague County. That list does not establish which company serves a particular address, so we confirm the electric line owner before planning conduit work near Hanson Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative | Electric utilities reporting service in Montague County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Ringgold’s median housing year at 1990; 38 percent of homes were built before 1960, 47 percent from 1960 to 1999 and 15 percent in 2000 or later. That age mix may mean replacement routes as well as new service runs along Cook Road. We hydrovac expose marked utilities before drilling near them, including water lines and electric facilities identified for the planned path.

How far is Ringgold from Bellevue and the Yukon yard?
Ringgold is in Montague County, at 899 feet elevation, and the mapped community covers 1.52 square miles. Its ZIP code is 76261. Bellevue is 13.2 miles south; Nocona is 12.4 miles east; Henrietta is 14.4 miles west; and Montague, the county seat, is 16.4 miles southeast. Bowie is the nearest larger city, 18.6 miles south. The Yukon yard is 136 road miles away, about a 3.0 hour drive, which matters when scheduling equipment for a Hanson Road job.
Places near Ringgold
- Directional boring in Nocona: 12.4 miles east
- Directional boring in Bellevue: 13.2 miles south
- Directional boring in Henrietta: 14.4 miles west
- Directional boring in Montague: 16.4 miles southeast
- Directional boring in Nocona Hills: 17.8 miles east
- Directional boring in Bowie: 18.6 miles south
What boring work could involve Blackman Road in Ringgold?
- Highway crossing: A utility route beneath US 81 calls for a planned bore under the travel lanes, rather than cutting existing highway pavement.
- Street service: A water or sewer line along Cook Road can run below the road surface while pits remain in dirt on each side.
- Fiber route: Conduit beside Blackman Road can connect a service while the bore plan accounts for Stoneburg soil and buried utilities.
- Rail crossing: A route near the Union Pacific Duncan Subdivision needs the track owner’s agreement and crossing conditions built into the plan.
- Drainage crossing: A line near the unnamed drainage in Ringgold needs a route that accounts for the channel, even though no named stream crossing is mapped inside the community.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Ringgold work near US 81?
For a Ringgold quote, start with the address or map pin, such as a point along Hanson Road. Tell us what goes underground, such as water or fiber, and the pipe or conduit size. Then give the expected footage and note whether the route crosses US 81 or Union Pacific track. A sketch or plans can show the alignment and help us scope the work.
Price depends on the route and the work it takes. Ground is one group: Stoneburg clay and shallow bedrock can change drilling and reaming time. Crossings are another: US 81, Union Pacific track, concrete or drainage can add planning, potholing or protection needs. Logistics matter too; Ringgold is 136 road miles from Yukon, and pits, excavator time, sand backfill, high profile work or emergency response affect the scope. Pipe size and bore length also matter.
Questions people ask about boring in Ringgold
Does Trinity take directional boring work in Ringgold, Montague County, and how is it staffed?
Yes, we take directional boring work in Ringgold, Montague County. The Yukon office coordinates the job, and our own crews or crews from satellite yards run by drilling partners we have vetted can handle the site. You work with Trinity from the first call through the bore log, whether the crew is at Hanson Road or another route.
Who owns electric lines in Ringgold, Montague County, and who confirms conduit specs?
The electric line owner depends on the specific Ringgold address. Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association and Wise Electric Cooperative report service in Montague County. We confirm the owner before planning conduit near Cook Road, then the owner confirms its conduit requirements for that route.
Does Ringgold County or a city control Blackman Road, and can a bore avoid cutting it?
Ringgold is an unincorporated community with no city government, so Blackman Road is handled by the county unless the work involves a state route. Directional boring can place a line beneath the road without opening a trench across its surface. The route, access points and any right of way still need to be planned for the responsible authority.
What do Ringgold homes near Cook Road suggest about replacement bores?
Ringgold’s median housing year is 1990 in the American Community Survey 2019 to 2023 five year estimates. The survey places 38 percent of homes before 1960 and 47 percent from 1960 to 1999. That makes replacement work one possible need along Cook Road, but the actual buried line and its condition must be confirmed before designing a bore.
Does Stoneburg soil in Ringgold pose a corrosion concern, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across 29 percent of Ringgold, including areas with Stoneburg soil. For steel casing or tracer wire, the line owner selects suitable protection. HDPE avoids that specific steel corrosion concern. The pipe choice depends on the line and the owner’s requirements along the planned route.
What ground might a Ringgold bore encounter in Stoneburg soil?
Stoneburg soil covers 46 percent of Ringgold in the USDA soil survey, and fine sandy loam is the main mapped surface texture. At about 40 inches, the map shows bedrock across 46 percent, clay across 25 percent and sandy clay loam across 25 percent. A bore may meet sticky clay or shallow rock, so mapped conditions are a planning guide, not a test of the exact route.
Can I reach someone after hours about an urgent Ringgold bore on Blackman Road?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent issue on Blackman Road, give us the location, what line is involved and what work is needed. We provide 24 hour emergency response, with the job plan depending on access, crossings and the ground at that address.
How early should I call Texas811 for a Ringgold bore along Hanson Road, and what if marks move?
For a bore along Hanson Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Ringgold work, if our start slips more than 14 days past the original notice, we submit a new request. On Ringgold work, we ask Texas811 to refresh marks that wear off or move before we continue.
What affects the cost of a Ringgold directional bore near US 81?
The route and scope set the price for a Ringgold bore near US 81. Stoneburg soil and shallow bedrock affect drilling; highway or Union Pacific crossings add coordination; and pavement, pits, potholing and excavator time change the work. Pipe size, bore length, emergency timing and mobilization from the Yukon yard also matter. A map pin and plans help define those factors.
Where the Ringgold facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ringgold
- U.S. Census Bureau, TIGER/Line 2024: Ringgold boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Ringgold population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ringgold housing units and year built
- Macrostrat geologic map compilation: map units under Ringgold
- U.S. Department of Transportation, North American Rail Network: track owners in Montague County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Montague County
- U.S. Geological Survey, Elevation Point Query Service: Ringgold elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ringgold
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ringgold
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ringgold, Texas
Type the address of your job in Ringgold. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ringgold
Same county: St. Jo · Sunset. All counties: Texas county list.
