trinityboringsolutions.com

Los Lobos Texas Directional Boring: Brennan Fine Sandy Loam, Copita Fine Sandy Loam and Laredo Formation

Quick Answer: With only 7 residents in the 2020 Census count, our directional boring, also called horizontal directional drilling (HDD), in Los Lobos can serve addresses along Los Lobos Road without a mapped highway crossing. Los Lobos Road is 711 road miles from our Yukon, Oklahoma main office, so mobilization matters even on a short service run. Brennan fine sandy loam is the largest mapped soil unit. Sandy clay loam at about 40 inches calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Los Lobos bores at a glance

  • Unincorporated community in Zapata County, Texas. Population 7 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 711 miles, about 14 hours of driving.
  • Ground: Brennan soil is mapped on 47 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 52 percent of the area.
  • No state or US highway is mapped inside the boundary or within a mile and a half of it.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Los Lobos Road in Los Lobos?

Trinity Boring Solutions takes directional boring work in Los Lobos, an unincorporated community in Zapata County. The Census Bureau counted 7 residents in 2020; it does not publish yearly estimates for unincorporated places. Along Los Lobos Road, Los Lobos Loop and Jean Lane, we install water, sewer, gas, electric conduit and fiber lines by choosing a bore route that fits the address and existing utilities.

Our main office is in Yukon, Oklahoma, and Los Lobos work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years; that record matters when planning around electric lines reported by AEP Texas Central and Medina Electric Cooperative in Zapata County.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should crews expect in Los Lobos near Brennan soil?

The USDA soil survey maps Brennan fine sandy loam across 47% of Los Lobos, with Copita fine sandy loam across 26% and Maverick Nido complex across 26%. These are mapped soil patterns, not test borings at a proposed address. Surface texture is fine sandy loam over 74% of the mapped area and clay over 26%. At about 40 inches below the surface, sandy clay loam is mapped under 48% of the area, with clay under 26% and bedrock under 26%.

USDA soil survey, inside the Los Lobos mapped community boundaryWhat is mapped
Soil series mappedBrennan 47 percent, Copita 26 percent and Maverick 26 percent
Texture at the surfacefine sandy loam 74 percent and clay 26 percent
Texture about 40 inches downsandy clay loam 48 percent, bedrock 26 percent and clay 26 percent
Engineering class about 40 inches downclayey sand (SC) 48 percent and fat clay (CH) 26 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches52 percent of the area (0 percent hard rock, 52 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel52 percent of the area

Bedrock is mapped within 60 inches over 52% of Los Lobos, and typical mapped depth is 35 inches; the survey identifies that bedrock as weathered, not hard. No seasonal water table or flood prone soils are mapped. High steel corrosion risk covers 52% of the area, so the line owner should weigh casing and tracer wire materials. The Laredo Formation of the Claiborne Group, Eocene in age, includes sandstone and clay; transitions can slow a bore or affect steering.

What does it take to bore Los Lobos sandy clay loam?

For Los Lobos sandy clay loam and clay, we control fluid and open the hole in stages so it stays stable without pushing excess pressure toward pavement on Los Lobos Road.

  1. At a Brennan soil route near Los Lobos Road, we tune drilling fluid to the mapped sandy clay loam and ream in stages to manage the open hole.
  2. Where the USDA survey maps bedrock within 35 inches, we check steering and adjust the drilling pace for the weathered rock shown beneath Los Lobos.
  3. Before drilling near marked lines on Los Lobos Loop, we hydrovac pothole each utility on the bore path because paint gives position, not depth.
  4. As a bore advances beneath Jean Lane, we track the drill head from the surface and log its depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Which roads, tracks or water crossings matter in Los Lobos near Los Lobos Road?

No highway is mapped inside the Los Lobos community boundary or within 1.5 miles outside it. The named local routes are Los Lobos Road, with 0.74 miles inside the boundary, Los Lobos Loop with 0.54 miles, and Jean Lane with 0.14 miles. A bore under one of these streets can keep pavement intact by placing entry and exit pits in dirt where access allows. The route still needs checking for utilities and property access.

No railroad or mapped street and rail crossing is recorded inside Los Lobos or within one mile outside it. No stream or mapped street crossing of a named stream is recorded inside the community. International Falcon Reservoir is within the mapped boundary; if a proposed bore reaches a reservoir crossing, we check for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Los Lobos bore in Zapata County?

Los Lobos has no city government, so street approvals belong to Zapata County unless the route reaches state right of way. No highway is mapped inside the community or within 1.5 miles outside it, and no railroad is mapped nearby. If a project reaches a TxDOT highway, the TxDOT Pharr District reviews the utility permit; the utility owner files in RULIS, and we prepare the bore plan and profile. A crossing at International Falcon Reservoir is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are in the ground in Los Lobos, Zapata County?

The water provider for a specific Los Lobos address has to be confirmed with Zapata County or the local water district before a bore is planned. EPA drinking water records for Texas do not tie a water system to this place, and no system carries its name, so the provider could not be matched. AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County, but the line owner at the address must be confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central and Medina Electric CooperativeElectric utilities reporting service in Zapata CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing data is not published for a place as small as Los Lobos, so the available record does not establish whether a job replaces older pipe or adds a new service. A short street network, including Los Lobos Road and Los Lobos Loop, can still have long service runs between addresses. September averages 4.2 inches of rain and January 0.8 inches, so crews check conditions at the actual work site. We hydrovac each marked utility on the bore path before drilling near it; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Los Lobos in relation to Falcon Village?

Los Lobos is an unincorporated community in Zapata County at 312 feet elevation, covering 0.14 square miles, with ZIP code 78564. Falcon Village is 3.3 miles southeast, H. Cuellar Estates is 3.8 miles southeast, and Falcon Heights is 4.0 miles southeast. Chapeno lies 4.2 miles southeast and Lago Vista 4.4 miles southeast. Zapata, the county seat, is 21.3 miles north; Roma is 16.4 miles southeast. Los Lobos is 711 road miles and a 14.0 hour drive from the Yukon yard.

Places near Los Lobos

  • Falcon Village: 3.3 miles southeast
  • H. Cuellar Estates: 3.8 miles southeast
  • Falcon Heights: 4 miles southeast
  • Chapeno: 4.2 miles southeast
  • Lago Vista: 4.4 miles southeast
  • Directional boring in Roma: 16.4 miles southeast

What kinds of bores could serve Los Lobos Loop in Los Lobos?

  • Water service: A new service bore along Los Lobos Road can connect an address while leaving the street surface uncut.
  • Fiber conduit: A route following Los Lobos Loop can carry conduit between service points, with marked utilities exposed before drilling nearby.
  • Electric conduit: Near Jean Lane, we confirm the line owner and conduit requirements before setting a bore route.
  • Reservoir approach: A proposed crossing near International Falcon Reservoir needs a jurisdiction check during planning before the route is set.
  • Sewer line: A sewer bore along Los Lobos Road can avoid an open cut across pavement where entry and exit pits fit in dirt.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Los Lobos Road bore quote in Los Lobos?

For a quote on Los Lobos Road or Jean Lane, send the address or map pin first. Tell us what will go in the ground, such as water pipe or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans showing the route and nearby pavement help us assess the work.

For a Los Lobos job, the mapped sandy clay loam and weathered bedrock matter because they affect drilling and reaming. We also consider bore length, pipe or conduit size, utilities to expose, pavement, pits and excavator time. A route near International Falcon Reservoir needs crossing review, while mobilization reflects the 711 road miles from Yukon. Emergency timing or a high profile route can add planning demands.

Questions people ask about boring in Los Lobos

Does Trinity Boring Solutions take directional boring jobs in Los Lobos, Zapata County?

Yes, we take directional boring work in Los Lobos, Zapata County. Our Yukon office coordinates the work, with our crews or crews from partner drilling contractors Trinity has personally vetted handling the site work. For an address on Los Lobos Road, we plan around the route, soil and marked utilities rather than assuming conditions are the same at every location.

Who owns electric lines in Los Lobos, Zapata County, and who confirms conduit specs?

AEP Texas Central and Medina Electric Cooperative report service in Zapata County, but that does not identify the owner at every Los Lobos address. Confirm the line owner and conduit specifications for the specific location before planning a bore near Los Lobos Loop. We need that information to set the route and protect existing lines.

Who is responsible for Jean Lane in Los Lobos, and must a bore cut the street?

Zapata County is responsible for streets in Los Lobos because this unincorporated community has no city government. A bore along Jean Lane can pass below the street without an open cut when the route and pits allow. We still check for marked utilities and the applicable county approval before work begins.

Can Brennan soil in Los Lobos corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 52% of Los Lobos, including mapped Brennan soil. That is a reason for the line owner to consider casing and tracer wire materials for a specific route. The line owner selects any coating or pipe material; the survey is not a site test.

What ground does a bore pass through in Brennan soil in Los Lobos?

Brennan fine sandy loam covers 47% of mapped Los Lobos soils. At about 40 inches below the surface, the USDA soil survey maps sandy clay loam across 48% of the area. Those mapped patterns help us plan fluid and staged reaming, but they do not replace checking the actual bore route.

How much bedrock is mapped within five feet of the surface in Los Lobos?

The USDA soil survey maps bedrock within 60 inches across 52% of Los Lobos, typically at 35 inches. The mapped bedrock is weathered; hard bedrock is not mapped within that depth. A route near Los Lobos Road may therefore call for slower drilling through weathered material, while deeper conditions still need field attention.

Does Trinity cover Falcon Village and rural sites outside Los Lobos?

Yes, we take work in Texas beyond Los Lobos, including rural sites. Falcon Village is 3.3 miles southeast of Los Lobos, and Roma is 16.4 miles southeast. We review each address, route and scope before planning a crew and equipment for the work.

How much notice does Texas811 need for a bore on Los Lobos Road in Los Lobos?

For a bore along Los Lobos Road, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of directional boring near Los Lobos Road in Los Lobos?

The route and scope set the price. Brennan soil, weathered bedrock and the pipe or conduit size affect drilling time; marked utilities, pavement and pit access affect the work plan. Mobilization also matters because Los Lobos Road is 711 road miles from Yukon. A reservoir crossing or emergency schedule can add planning needs.

Where the Los Lobos facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Los Lobos

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Los Lobos, Texas

Type the address of your job in Los Lobos. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Los Lobos

Same county: Zapata · Medina · Siesta Shores · Falcon Lake Estates · San Ygnacio · Falcon Mesa · New Falcon · Lopeño · Morales-Sanchez · Las Palmas · Ramireno. All counties: Texas county list.