Zapata Texas Directional Boring: Copita Fine Sandy Loam, US 83 and Arroyo Indigo
Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Zapata work such as a crossing beneath US 83. Zapata is 684 road miles from our Yukon, Oklahoma main office, so work near Hidalgo Street is staffed through our own crews and vetted partner contractor satellite yards. Copita soil is common here, and its fine sandy loam can give way behind a bore head. Arroyo Indigo crossings call for a route planned beneath the channel rather than through its banks.
Zapata bores at a glance
- County seat of Zapata County, Texas. Population 5,383 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 684 miles, about 13.2 hours of driving.
- Ground: Copita soil is mapped on 45 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 50 percent of the area.
- Highways inside the boundary: US 83, Texas State Highway 16 and FM 496. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Arroyo Indigo, Arroyo Valeriano, Arroyo Costa Rica and Arroyo Torcido.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring across US 83 in Zapata?
Trinity Boring Solutions takes directional boring work in Zapata County, including routes near US 83 and Hidalgo Street. The Census Bureau counted 5,383 people in Zapata in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, with the route and line type set for the street or property where the bore is planned.
Our main office is in Yukon, Oklahoma, and Zapata work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A planned run near US 83 is scoped to its own length, ground and crossings, not that longer job.

What does the soil survey show for Copita soil in Zapata?
The USDA soil survey maps Copita fine sandy loam across 45 percent of Zapata, so sandy surface ground is a major factor in bore planning. Brennan, Hebbronville and other mapped soils also occur. At about 40 inches below the surface, fine sandy loam is mapped across 12 percent, while sandy clay loam covers 25 percent and clay 7 percent. The survey estimates 22 percent sandy ground at that depth and average clay content of 24 percent. We use Copita and Brennan mapped soil patterns as planning references, not test borings, when laying out a Zapata bore route.
| USDA soil survey, inside the Zapata mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Copita 45 percent, Brennan 16 percent, Hebbronville 12 percent, Tela 8 percent and Veleno 7 percent |
| Texture at the surface | fine sandy loam 66 percent, loamy fine sand 12 percent and sandy clay loam 8 percent |
| Texture about 40 inches down | bedrock 48 percent, sandy clay loam 25 percent and fine sandy loam 12 percent |
| Engineering class about 40 inches down | clayey sand (SC) 25 percent, silty clayey sand (SC SM) 12 percent and lean clay (CL) 7 percent |
| Average clay content about 40 inches down | 24 percent |
| Bedrock mapped within 60 inches | 50 percent of the area (0 percent hard rock, 50 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 15 percent of the area |
| High corrosion risk for uncoated steel | 53 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 50 percent of Zapata, with typical depth at 35 inches; the mapped bedrock is weathered, not hard. That can slow a bore and make the soil to rock contact a steering concern. Seasonal water table is not mapped within that depth, while flood prone soils cover 15 percent, so Arroyo Indigo needs channel specific planning. High steel corrosion risk is mapped across 53 percent, a concern for uncoated casing and tracer wire. The Laredo Formation of the Claiborne Group, Eocene age, is described as sandstone and clay.
How do we run a bore through Zapata bedrock and soil?
For a Zapata route through Copita soil and mapped weathered bedrock, we match the drill and fluid plan to what the bore encounters. A surface locator tracks the head, while depth and pitch are logged as it advances.
- Copita fine sandy loam can cave behind the bit, so we use drilling fluid to support the hole and have the pipe ready before the final ream.
- Where the Zapata survey maps sandy clay loam and clay at about 40 inches, staged reaming helps manage the changing cut without forcing the bore.
- The mapped weathered bedrock near 35 inches can slow the head; we watch depth and pitch closely as the route meets rock.
- Along Arroyo Indigo, we plan the bore below the channel and place pits on the bankside ground rather than cutting the channel.

Which roads and creeks can a Zapata bore cross near Arroyo Indigo?
US 83, Texas State Highway 16 and FM 496 run inside the mapped community boundary, so a route beneath one of them needs to account for highway right of way. Hidalgo Street is the longest named street, followed by Lozano Avenue and Glenn Street. 13th Avenue is another long local route. Those streets help identify the work area, but the exact bore path and existing pavement determine where pits can sit without cutting the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | US highway | 3.8 roadway miles inside | State highway office |
| Texas State Highway 16 | State highway | 1.7 roadway miles inside | State highway office |
| FM 496 | State highway | 1.6 roadway miles inside | State highway office |
| Arroyo Indigo | Stream | 2.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo Valeriano | Stream | 2.07 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo Costa Rica | Stream | 1.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo Torcido | Stream | 1.11 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo San Bartolo | Stream | 0.57 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Arroyo Ranchito | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| International Falcon Reservoir | Lake or pond | 36,021 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Zapata community boundary or within one mile outside it, and none of the mapped street and rail crossings fall inside. Arroyo Indigo runs 2.31 channel miles inside the community, and 14 street crossings of named streams are mapped. Arroyo Valeriano also runs through the area. International Falcon Reservoir is inside the boundary, so a proposed water crossing there needs jurisdiction checked during planning.
Do I need a permit for a Zapata County bore under US 83?
A bore beneath US 83, Texas State Highway 16 or FM 496 needs a TxDOT utility permit for work in highway right of way. For Zapata County, the TxDOT Pharr District reviews the filing, which the utility owner submits through RULIS; we prepare the bore plan and profile for that application. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade, water needs 60 inches and pressurized sewer needs 60 inches. Zapata is unincorporated, so it has no city government; local street authority depends on whether the route is county or state right of way. Arroyo Indigo planning includes a check for federal waterway jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities may be in the ground in Zapata County?
For a Zapata address on Hidalgo Street, we confirm its water provider with Zapata County or the local water district before planning a bore. EPA drinking water records do not tie water systems to towns, so a provider could not be matched to this community. AEP Texas Central and Medina Electric Cooperative report electric service in Zapata County; the line owner for the address must be confirmed before planning an electric conduit bore near US 83.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Medina Electric Cooperative | Electric utilities reporting service in Zapata County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimate of Zapata’s 1992 median housing year as underground planning context. We use the survey’s Zapata housing age estimates for underground planning: 7 percent before 1960, 69 percent from 1960 to 1999, and 24 percent in 2000 or later. That mix can mean replacement work as well as new services along Glenn Street. We hydrovac pothole each marked utility on the planned path before drilling near it, since paint does not show depth.

Where is Zapata in relation to Medina and Roma?
Zapata is the county seat of Zapata County, an unincorporated community covering 7.64 square miles at an elevation of 376 feet. ZIP code 78076 serves the area. Medina is 2.3 miles north, while Falcon Lake Estates is 2.1 miles south and Falcon Mesa is 2.9 miles southwest. Roma, the nearest larger city in the records, is 37.2 miles southeast. From our Yukon yard, the route is 684 road miles and a 13.2 hour drive, which is part of planning mobilization for a job near US 83.
Places near Zapata
- Directional boring in Falcon Lake Estates: 2.1 miles south
- Directional boring in Medina: 2.3 miles north
- Directional boring in Falcon Mesa: 2.9 miles southwest
- Directional boring in Las Palmas: 3.5 miles north
- Directional boring in Siesta Shores: 3.6 miles south
- Directional boring in Roma: 37.2 miles southeast
What would we bore near Hidalgo Street in Zapata?
- Highway crossing: A bore beneath US 83 is planned for required cover and travel lanes, with pits outside the pavement.
- Water service: A service route near Hidalgo Street can be bored from dirt pits to avoid opening the street surface.
- Fiber conduit: A conduit run along 13th Avenue can pass beneath pavement while marked utilities are exposed before drilling nearby.
- Creek crossing: A proposed line under Arroyo Indigo needs a route below the channel and a jurisdiction check during planning.
- Electric conduit: Near FM 496, we confirm the line owner and plan around existing marked utilities before drilling.
- Reservoir crossing: A line route beneath International Falcon Reservoir needs water crossing jurisdiction checked as part of planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Zapata bore quote near 13th Avenue?
For a route near 13th Avenue, start with the address or map pin, then tell us what will go in the ground. Add the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to Arroyo Indigo, US 83 or nearby streets before we scope the bore.
Copita soil and weathered bedrock make ground conditions a leading price factor because they affect drilling and steering. Length and pipe or conduit size shape the equipment and work plan. Crossings matter too, especially a route under US 83 or Arroyo Indigo, where cover, access and waterway planning affect the scope. Pavement, pits, excavator time, sand backfill and exposed utilities also count. The 684 road miles from Yukon affect mobilization, and emergency or high profile work can add planning needs.
Questions people ask about boring in Zapata
Does Trinity take directional boring work in Zapata County, and how is it staffed?
Yes, Trinity takes directional boring work in Zapata County. Our main office is in Yukon, and Zapata projects are handled by our own crews or through partner contractor satellite yards we have vetted. The customer works with Trinity from the first call through the bore log, including a job planned near US 83.
Does Copita soil in Zapata create a corrosion concern for steel pipe?
The Zapata soil survey maps high steel corrosion risk across 53 percent of the area, so the line owner should consider casing and tracer wire materials. Copita fine sandy loam is the most common mapped soil series. HDPE is not subject to that soil corrosion concern, while the line owner chooses any coating for steel.
What ground might a bore meet in Zapata’s Copita soil?
A bore in Zapata may start in Copita fine sandy loam, which the USDA soil survey maps across 45 percent of the community. At about 40 inches, the survey maps sandy clay loam across 25 percent and clay across 7 percent. Those mapped layers guide planning, but they are not a substitute for site investigation.
How much of Zapata has bedrock mapped within five feet, and is it hard?
The USDA soil survey maps bedrock within five feet across 50 percent of Zapata. The mapped bedrock is weathered, and hard bedrock is not mapped within that depth. Typical bedrock depth is 35 inches, so a planned bore may slow down or need extra steering attention as it meets rock.
Who approves a Zapata bore beneath US 83?
TxDOT reviews a utility permit for work in US 83 right of way through its Pharr District. The utility owner files in RULIS, and we prepare the bore plan and profile for the application. The permitted depth can depend on the line type and crossing conditions at the specific highway location.
Can a Zapata line be bored under Arroyo Indigo?
A line can be planned beneath Arroyo Indigo, but the route needs to stay below the channel and be checked for U.S. Army Corps of Engineers jurisdiction during planning. The stream runs 2.31 channel miles inside Zapata. Its banks and the location of the entry and exit pits matter to the crossing plan.
Can I reach Trinity after hours about an urgent Zapata bore near Glenn Street?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent bore near Glenn Street. We can discuss the location, what line is involved and the immediate scope. Marked utilities still need to be exposed before drilling near them.
How much notice does Texas811 need for a Zapata bore near Hidalgo Street?
For work near Hidalgo Street, place the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For US 83 work, if our start slips more than 14 days past the original notice, we make a new request. Along Texas State Highway 16, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a Zapata directional bore under US 83?
The price for a Zapata bore under US 83 depends on its length, pipe or conduit size, Copita soil and any weathered bedrock, plus the number of utilities to expose. Pavement, pits, excavator time and backfill also shape the scope. A highway crossing and the 684 road miles from Yukon affect planning and mobilization.
Where the Zapata facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Zapata
- U.S. Census Bureau, TIGER/Line 2024: Zapata boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Zapata population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Zapata housing units and year built
- Macrostrat geologic map compilation: map units under Zapata
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Zapata County
- U.S. Geological Survey, Elevation Point Query Service: Zapata elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Zapata
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Zapata
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Zapata, Texas
Type the address of your job in Zapata. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Zapata
Same county: San Ygnacio · New Falcon · Lopeño · Morales-Sanchez · Ramireno · Los Lobos. All counties: Texas county list.
