trinityboringsolutions.com

Paradise Texas Directional Boring: Bastsil Soil, Highway 114 and Union Pacific Track

Quick Answer: Trinity Boring Solutions can bore beneath Texas State Highway 114 or the Union Pacific track without cutting the surface, using directional boring, also called horizontal directional drilling (HDD). Paradise is 197 road miles from our Yukon, Oklahoma main office, and School House Road gives us a named route to review for access. Bastsil soil makes up 44 percent of mapped area, and sandy clay loam below the surface can hold the hole while sticking to a reamer. That ground calls for staged reaming and a careful pullback.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Paradise bores at a glance

  • Incorporated city in Wise County, Texas. Population 765 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 197 miles, about 4 hours of driving.
  • Ground: Bastsil soil is mapped on 44 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 114, Loop 444 and FM 3259. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
  • Public water: City of Paradise, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Paradise and Wise County?

Trinity Boring Solutions takes directional boring work in Paradise, Wise County, where the Census Bureau Vintage 2024 estimate puts the population at 765. Along School House Road or Main Street, we install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement or other surface obstacles.

Our main office is in Yukon, Oklahoma, and Paradise work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965; since 1982, four decades of directional boring have shaped how we plan for the Bastsil fine sandy loam and deeper sandy clay loam mapped around Paradise.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bastsil soil like to bore in Paradise?

The USDA soil survey maps Bastsil fine sandy loam across 44 percent of Paradise, with Hassee fine sandy loam at 22 percent and Windthorst fine sandy loam at 14 percent. Fine sandy loam is the mapped surface texture across 99 percent of the city. At about 40 inches, sandy clay loam is mapped under 74 percent and clay under 22 percent; average clay content there is 33 percent. These are mapped soil patterns, not test borings, so a route still needs site specific planning.

USDA soil survey, inside the Paradise city limitsWhat is mapped
Soil series mappedBastsil 44 percent, Hassee 22 percent, Windthorst 15 percent, Duffau 11 percent and Silawa 5 percent
Texture at the surfacefine sandy loam 99 percent
Texture about 40 inches downsandy clay loam 74 percent and clay 22 percent
Engineering class about 40 inches downlean clay (CL) 75 percent and fat clay (CH) 22 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches22 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel23 percent of the area

Because bedrock is not mapped in Paradise’s top five feet, we still account for the possibility of deeper rock during boring. A seasonal water table is mapped within 40 inches across 22 percent of the area, so pits there may need pumping. Flood prone soils cover 3 percent, while high steel corrosion risk is mapped across 23 percent; the line owner should consider steel casing and tracer wire materials. The Aptian Twin Mountains Formation includes sandstone, claystone and conglomerate, which may affect drilling below the mapped soils.

How do we plan a bore through Paradise’s sandy clay loam?

We match the drilling plan to Paradise’s mapped sandy clay loam and the route, then track the drill head and log its depth and pitch as the bore advances.

  1. In Paradise’s sandy clay loam, we use thinner drilling fluid and polymer, then open the hole in stages to limit sticky cuttings on the reamer.
  2. Because clay is mapped under 22 percent of the area at about 40 inches, we watch returns and control fluid pressure near pavement.
  3. Where the seasonal water table is mapped within 40 inches, we keep pits small and pump them if water collects.
  4. We hydrovac pothole marked utilities before drilling near them, then track depth and pitch along routes such as School House Road.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Paradise near Union Pacific?

Texas State Highway 114 runs 2.0 mapped roadway miles inside Paradise, with Loop 444 at 0.8 miles and FM 3259 at 0.7 miles. School House Road is the longest named street at 1.28 miles, followed by Pecan Street at 0.93 miles and Main Street at 0.84 miles. These routes give a project several different pavement and access conditions to plan around; boring can pass beneath existing surfaces rather than cutting across them.

CrossingTypeMapped extentWho has a say
Texas State Highway 114State highway2 roadway miles insideState highway office
Loop 444State highway0.8 roadway miles insideState highway office
FM 3259State highway0.7 roadway miles insideState highway office
Union PacificRailroad1.67 track miles insideThe railroad
West Fork Trinity RiverStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.67 track miles inside Paradise, and one mapped street and rail crossing makes track coordination relevant to a route. The West Fork Trinity River is 0.7 miles outside the city limits, while 1.81 miles of unnamed drainage are mapped inside. No street crossings of named streams or lakes and ponds within one mile are mapped, but drainage along a proposed route still matters when setting the bore path.

Whose permission does a Paradise bore under Texas State Highway 114 need?

A bore beneath Texas State Highway 114 in Paradise needs a TxDOT utility permit because the state highway right of way belongs to the state, and the TxDOT Fort Worth District reviews it. The utility owner, not our crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application. A route beneath Union Pacific track needs an agreement from the railroad owner. For a crossing near the West Fork Trinity River, planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Paradise city streets belong to the city itself.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground near the City of Paradise system?

The City of Paradise public water system uses purchased surface water and reports 323 service connections serving 969 people. For electric conduit near School House Road, we first confirm the line owner because public records list Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative as reporting service in Wise County. That county list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of ParadisePublic water systemSurface water bought from another system323 connections, 969 people served
Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Wise CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Paradise’s median housing year at 1985; 19 percent of homes were built before 1960, 58 percent from 1960 to 1999 and 23 percent in 2000 or later. That mix can mean both replacement lines and newer services along Main Street. We hydrovac pothole every marked utility on the bore path before drilling near it; for a Main Street crossing, locate paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Paradise in relation to Bridgeport and Decatur?

Paradise is in Wise County, covers 2.09 square miles and sits at an elevation of 764 feet. ZIP code 76073 serves Paradise, so we use it to identify the service area when organizing underground work. Bridgeport is 6.4 miles northwest and is the nearest larger city; Decatur, the county seat, is 7.9 miles northeast. Boyd is 8.5 miles southeast. From our Yukon, Oklahoma main office, Paradise is 197 road miles away and about a 4.0 hour drive, which is part of planning crew mobilization for a job on School House Road or Texas State Highway 114.

Places near Paradise

What kinds of bores come up near Paradise and the West Fork Trinity River?

  • Highway crossing: A line beneath Texas State Highway 114 can pass under the pavement, with the route and highway right of way addressed in the plan.
  • Water service: A new service near the City of Paradise system needs its line owner and existing utilities checked along streets such as Main Street.
  • Fiber route: Fiber conduit along School House Road can be bored beneath pavement, with marked utilities exposed before drilling approaches them.
  • Rail crossing: A route under the Union Pacific track needs the railroad owner’s agreement and crossing details before the bore is planned.
  • Creek crossing: A proposed line toward the West Fork Trinity River needs a route review and a check for U.S. Army Corps of Engineers jurisdiction.
  • Drainage bore: Paradise has 1.81 miles of unnamed drainage mapped inside the city, so a route crossing a drainage needs depth and access planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Paradise bore near School House Road?

For a Paradise quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A route beside School House Road or beneath Texas State Highway 114 lets us identify pavement, access and crossings that may change the work plan.

The mapped sandy clay loam matters first because it can cling to the reamer and affect how we stage the bore. Price also reflects length, pipe or conduit size, utilities to expose, pavement, drainage crossings, pits and excavator time. A Union Pacific track crossing brings coordination into the route, while mobilization reflects Paradise’s 197 road miles from Yukon. When we plan high profile or emergency work in Paradise, we allow for scope changes as conditions require.

Questions people ask about boring in Paradise

Does Trinity Boring Solutions take directional boring jobs in Wise County’s Paradise?

Yes, we take directional boring work in Paradise, Wise County. We staff the work with our crews or with partner contractor crews from satellite yards, while you deal with Trinity from the first call through the bore log. That gives a project along School House Road one point of contact even when a partner crew is on site.

Will a Paradise bore hit rock below Bastsil soil?

The USDA soil survey does not map bedrock in Paradise’s top five feet, but that does not rule out deeper rock. The geologic map shows the Aptian Twin Mountains Formation, including sandstone, claystone and conglomerate. A bore near Bastsil soil still needs a site specific plan because mapped geology does not establish the exact ground at a particular address.

Who approves a Paradise bore under Texas State Highway 114?

TxDOT reviews the utility permit for a Paradise bore under Texas State Highway 114 through its Fort Worth District. The utility owner files the application online in RULIS, and we prepare the bore plan and profile for the owner. The planned route and line type inform the permit details for work in the highway right of way.

What does a Paradise bore beneath Union Pacific track require?

A Paradise bore beneath Union Pacific track needs an agreement from the railroad that owns the line. For a Paradise crossing, we follow the agreement’s casing, depth and flagging conditions before setting the boring plan. Since 1.67 track miles are mapped inside the city, the proposed route needs to be checked against the track before the bore plan is settled.

Can a line be bored under the West Fork Trinity River near Paradise?

A bore can be planned for a route near the West Fork Trinity River, which lies 0.7 miles outside Paradise’s limits. While planning a Paradise crossing, we check whether it falls under US Army Corps of Engineers jurisdiction before advancing the route. The route, depth and access need review for the specific site rather than assuming a crossing is clear.

Who runs Paradise’s water system, and where does its water come from?

The City of Paradise runs the public water system, which uses purchased surface water. Public records report 323 service connections and 969 people served. For a proposed water line near Main Street, the specific connection and existing buried utilities still need to be identified before the bore route is set.

What bore sizes and lengths can Trinity handle for a Paradise job on Main Street?

For a Paradise job on Main Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The pipe or conduit, route and ground determine the suitable setup. A sketch showing pavement and nearby utilities helps us assess the job.

How much notice does Texas811 need for a bore on Paradise’s School House Road?

For a bore along School House Road, the locate request goes through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If our Paradise start moves more than 14 days past the original notice, we submit a new request before proceeding. Before we continue boring in Paradise, we have worn or moved marks refreshed through Texas811 to keep the marked route current.

What affects the price of a Paradise bore beneath Texas State Highway 114?

For a Paradise bore beneath Texas State Highway 114, price reflects the length and pipe or conduit size, ground conditions, utilities to expose, pavement and the permit route. The sandy clay loam can affect reaming, while highway crossings, pits and mobilization from Yukon also shape the job. We price the scope rather than one factor alone.

Where the Paradise facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Paradise

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Paradise, Texas

Type the address of your job in Paradise. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Paradise

Same county: Briar · Pecan Acres · Rhome · New Fairview · Aurora · Alvord · Newark · Chico. All counties: Texas county list.