trinityboringsolutions.com

Plains Texas Directional Boring: Midessa Soil, US 380, Ogallala Formation

Quick Answer: In Plains, what does the top five feet map as, and what lies below? Fine sandy loam dominates, with sandy clay loam about 40 inches down. We take directional boring, also called horizontal directional drilling (HDD), beneath US 380 and along streets such as Avenue G. Plains is 427 road miles from our Yukon, Oklahoma main office, so a route near 1st Street affects mobilization. Midessa soil covers 47 percent of the mapped area, and its clay rich layer can grip a reamer and pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Plains bores at a glance

  • County seat of Yoakum County, Texas. Population 1,358 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 427 miles, about 8.1 hours of driving.
  • Ground: Midessa soil is mapped on 47 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 380, US 82 and Texas State Highway 214. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Plains, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Plains near Avenue G?

Trinity Boring Solutions takes directional boring work in Plains, Yoakum County, where the Census Bureau Vintage 2024 estimate lists 1,358 residents. The USDA soil survey maps fine sandy loam at the surface and sandy clay loam farther down. Along Avenue G, 1st Street or US 380, we can install water, sewer, gas, electric conduit and fiber routes with a bore planned for the mapped ground and nearby lines.

Our main office is in Yukon, Oklahoma, and Plains work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A service line along Avenue G can be as small as 3/4 inch, while a larger crossing near US 380 can use casing up to 48 inch. Our family business began in 1965, and directional boring has been part of our work since 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Midessa soil affect drilling in Plains?

The USDA soil survey maps Midessa soil across 47 percent of Plains, with Arvana covering 21 percent and Kimberson 14 percent. Fine sandy loam is the main surface texture, mapped across 75 percent of the town. At about 40 inches below the surface, sandy clay loam is mapped under 47 percent of the area, and average clay content there is 29 percent. We treat Midessa mapped soil patterns as planning context, not as test borings for directional work in Plains. On a route near Avenue G, the clay rich layer can hold the bore open but may cling to a reamer or grip pipe.

USDA soil survey, inside the Plains city limitsWhat is mapped
Soil series mappedMidessa 47 percent, Arvana 21 percent, Kimberson 14 percent, Baileyboro 10 percent and Sharvana 9 percent
Texture at the surfacefine sandy loam 75 percent, gravelly loam 14 percent and loam 10 percent
Texture about 40 inches downsandy clay loam 47 percent, very gravelly loam 21 percent and cemented material 14 percent
Engineering class about 40 inches downlean clay (CL) 56 percent, clayey gravel (GC) 21 percent and silty gravel (GM) 8 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel0 percent of the area

For a route near US 380, bedrock is not mapped in the top five feet, but that does not establish what may lie deeper. The USDA survey also maps no seasonal water table in the top five feet, while flood prone soils cover 10 percent of Plains. We see no mapped high steel corrosion risk in fine sandy loam, but mapping is not a site test. The geologic map shows the Ogallala Formation of Neogene age, with sand, silt, clay, gravel and caliche. That mix can mean changing cut and steering conditions along a bore.

How do we drill Plains sandy clay loam?

On Plains routes through sandy clay loam, we plan for clay that can hold the hole yet build up on the reamer. The Midessa soil map guides the plan, while exposed utilities and live steering readings guide the actual bore.

  1. On a Midessa route with sandy clay loam, we choose fluid and reaming stages to limit clay buildup, then have the pipe ready to pull while the bore is open.
  2. Where the USDA survey maps gravelly loam at about 40 inches, we check drill depth and pitch at each rod so gravel does not quietly move the head off line.
  3. Before drilling near Avenue East or 1st Street, we expose each marked utility on the path with hydrovac potholing because surface marks do not show depth.
  4. As a bore advances near US 380, we follow the drill head with a walkover locator and log depth and pitch to keep the planned route in view.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Where might a Plains line go under US 380?

In Plains, a bore may need to pass beneath US 380, US 82 or Texas State Highway 214 without cutting the roadway. Public mapping shows 2.3 roadway miles each for US 380 and US 82 inside town limits, and 1.0 mile for Texas State Highway 214. The street grid includes 1.01 miles of Avenue G and 1.0 mile each of 1st Street and Avenue East. Those routes help define access and possible crossing points, but the alignment needs to be checked against the actual site.

CrossingTypeMapped extentWho has a say
US 380US highway2.3 roadway miles insideState highway office
US 82US highway2.3 roadway miles insideState highway office
Texas State Highway 214State highway1 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Plains or within 1 mile outside town, so a rail crossing is not part of the mapped route picture. No named streams or lakes are mapped in town or nearby, and no street crossings of named streams are mapped. The survey does show 2.41 miles of unnamed drainage inside Plains. If a proposed route reaches a channel, we plan the depth around it and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who approves a Plains bore in Yoakum County?

For a Plains crossing beneath US 380, US 82 or Texas State Highway 214, the TxDOT Lubbock District reviews the utility permit because the roads are state or US highways. The utility owner submits its application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. At existing highway pavement, the crossing is bored or tunneled, and the district permit sets cover depth and other conditions. City streets such as Avenue G belong to the City of Plains. No railroad is mapped here. A drainage crossing needs a jurisdiction check during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Plains water system?

The City of Plains public water system uses groundwater wells and lists 668 service connections serving 1,355 people. That makes the system a likely point to check when planning a water route near 1st Street, but the line at the job address still needs to be identified. Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative report electric service in Yoakum County. We confirm the electric line owner before planning a conduit bore.

Line ownerWhat it isSourceSize
City of PlainsPublic water systemGroundwater wells668 connections, 1,355 people served
Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric CooperativeElectric utilities reporting service in Yoakum CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median year built for Plains housing at 1983; 30 percent of units predate 1960, 56 percent date from 1960 to 1999, and 14 percent were built in 2000 or later. A replacement bore near Avenue G may need to meet older buried services, while newer connections bring their own route checks. We hydrovac marked lines before drilling close, since paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Plains from Seagraves and our Yukon office?

Plains is in Yoakum County, where it also serves as the county seat, at an elevation of 3,632 feet and within 1.5 square miles. ZIP code 79355 covers town addresses. Denver City is 15.2 miles south, Seagraves is 22.6 miles southeast, and Brownfield, the nearest larger city, is 31.7 miles east. From the Yukon yard, the road trip to Plains is 427 miles and 8.1 hours. That distance is part of planning mobilization for work along US 380 or Avenue G.

Places near Plains

What kinds of bores come up in Plains near Avenue East?

  • Highway crossing: A route beneath US 380 or US 82 can keep a new water or fiber line below existing pavement rather than opening the roadway.
  • Water service: A connection near 1st Street can tie into a route serving the City of Plains system, after the specific line is confirmed.
  • Fiber conduit: Avenue G provides a named street route where a bore can carry conduit while leaving the pavement uncut.
  • Electric conduit: Near Avenue East, we first verify the line owner because several utilities report electric service in Yoakum County.
  • Drainage crossing: A proposed route near the 2.41 miles of unnamed drainage in Plains needs a depth plan and a jurisdiction check.
  • Service replacement: Along 1st Street, a bore can provide a replacement path while hydrovac potholing checks older buried lines before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Plains quote near Avenue G?

For a Plains quote, show us where the work is, such as a map pin by Avenue G or an address near US 380. Tell us what goes underground, such as water or fiber, then give the pipe or conduit size and footage. A sketch or plans showing nearby lines and the intended route help us judge the Midessa soil and access.

The Plains price reflects the route, not a single detail. Ground conditions matter, including Midessa clay and gravelly material mapped at about 40 inches. Crossings matter too, such as US 380 pavement, marked utilities or a drainage route. We also account for pits, excavator time, sand backfill, pavement, bore length and conduit size. At 427 road miles from Yukon, mobilization is another part of the job, especially for high profile or emergency work.

Questions people ask about boring in Plains

Does Trinity Boring Solutions take jobs in Plains, Yoakum County, and who staffs them?

Yes, we take directional boring work in Plains, Yoakum County. Our own crews do the work, and we also use satellite yards operated by drilling contractors we have personally vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site near Avenue G or US 380.

What does the housing age near Plains 1st Street mean for replacement bores?

Plains housing ranges from older homes to newer construction, so the age of a nearby line cannot be assumed from the street alone. The American Community Survey estimates a median build year of 1983, with 30 percent of units built before 1960. For a replacement route near 1st Street, we locate and expose marked utilities before drilling.

Could groundwater or flood prone ground affect bore pits in Plains Midessa soil?

The USDA soil survey does not map a seasonal water table in the top five feet of Plains, but it maps flood prone soils across 10 percent of town. A Midessa route still needs a site check before pits are set. If work is near mapped drainage, we plan the crossing depth and check jurisdiction.

What ground might a Plains bore pass through in Midessa soil?

The USDA soil survey maps Midessa across 47 percent of Plains and fine sandy loam across 75 percent at the surface. At about 40 inches, sandy clay loam is mapped under 47 percent of town. Clay can hold an open hole but cling to the reamer, so we adjust the fluid and reaming plan to the actual ground.

Will our directional bore through Baileyboro soils in Plains hit rock?

For Plains in Yoakum County, we do not map bedrock in the top five feet, though deeper rock remains possible. The geologic map identifies the Ogallala Formation, which includes sand, silt, clay, gravel and caliche. Near US 82, the bore plan still needs to account for changing material rather than assume one uniform cut.

Does TxDOT Lubbock District approve our bore under US 380 in Plains?

For a bore under US 380, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Lubbock District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. The permit establishes the highway crossing conditions, including cover.

How much notice does Texas811 need for a Plains bore near Avenue G?

For an Avenue G bore, submit the Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. With Plains 427 road miles from the Yukon main office, we need a new request if the start slips more than 14 days past the original notice. Marks that wear off or move need refreshing through Texas811 before work continues.

Does the distance from Plains to Brownfield change a job from the Yukon office?

Plains is 427 road miles and an 8.1 hour drive from our Yukon, Oklahoma main office; Brownfield is 31.7 miles east of Plains. The distance from Yukon affects mobilization planning for a job near Avenue G. We can review the route, materials and access before setting the work plan.

What affects our directional bore cost under US 380 in Plains, including fine sandy loam?

The price depends on the Plains job details: bore length and pipe size, Midessa soil conditions, pavement, utility crossings and pit work. A route beneath US 380 may need different planning from a short service near Avenue East. Drainage, sand backfill, excavator time, emergency timing and mobilization from Yukon also affect the scope.

Where the Plains facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Plains

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Plains, Texas

Type the address of your job in Plains. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Plains

All counties: Texas county list.