La Vernia Texas Directional Boring: Wilco Soil, US 87 and Cibolo Creek
Quick Answer: Along US 87 and FM 775, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines passing beneath La Vernia roads. La Vernia has 23.17 public road miles, and the Yukon main office is 485 road miles away; Country Gardens is one route where access matters. Wilco loamy fine sand is common here, so the hole needs support as the bore advances. Staged reaming and having pipe ready help manage sandy ground near Cibolo Creek.
La Vernia bores at a glance
- Incorporated city in Wilson County, Texas. Population 1,483 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 485 miles, about 9.1 hours of driving.
- Ground: Wilco soil is mapped on 40 percent of the area, with fine sandy loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: US 87, FM 775 and FM 1346. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cibolo Creek and Dry Hollow Creek.
- Public water: City of La Vernia, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near US 87 in La Vernia?
Trinity Boring Solutions takes directional boring work in La Vernia, Wilson County, including beneath US 87 and local streets. The Census Bureau Vintage 2024 estimate puts the city population at 1,483. Where water or sewer service runs along La Vernia Road, or fiber and electric conduit must pass beneath Old Seguin Road, we can plan a bore around the route and the line being installed.
Our main office is in Yukon, Oklahoma, and La Vernia work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; we use La Vernia’s loamy fine sand as a planning consideration. Near FM 775, our equipment range covers 3/4 inch service lines through 48 inch casing.

What is Wilco soil like to bore in La Vernia?
Wilco is the leading mapped soil series in La Vernia, covering 40 percent of the city, and Wilco loamy fine sand slopes gently across much of that mapped area. The USDA soil survey maps fine sandy loam at about 40 inches below the surface across 39 percent of the city; clay averages 27 percent at that depth. We treat Wilco and Venus as mapped soil patterns, not test borings, and use them only as planning context for La Vernia work. Sandy ground can loosen behind the drill, while clay can hold an open hole but cling to the reamer.
| USDA soil survey, inside the La Vernia city limits | What is mapped |
|---|---|
| Soil series mapped | Wilco 40 percent, Venus 20 percent, Floresville 17 percent, Buchel 7 percent and Aluf 5 percent |
| Texture at the surface | loamy fine sand 42 percent, fine sandy loam 23 percent and clay loam 20 percent |
| Texture about 40 inches down | fine sandy loam 39 percent, sandy clay loam 24 percent and clay loam 20 percent |
| Engineering class about 40 inches down | lean clay (CL) 41 percent, clayey sand (SC) 40 percent and fat clay (CH) 7 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 10 percent of the area |
The USDA survey maps bedrock within 60 inches across 3 percent of La Vernia, so most routes have no mapped bedrock in the top five feet; deeper rock is still possible. The survey maps no seasonal water table within 60 inches, but flood prone soils cover 10 percent of the area, a consideration near Cibolo Creek. In Wilson County, we treat the mapped high steel corrosion risk across 10 percent as a planning flag when preparing underground work. The Wilcox Group, undivided, is mapped beneath the area and dates to the Ypresian; its mudstone, sandstone, shale, siltstone and lignite may mean slower drilling where encountered.
How do we bore La Vernia’s fine sandy loam?
For fine sandy loam mapped across La Vernia, we support the bore hole as it advances and keep the drill path controlled near streets such as Country Gardens.
- In Wilco loamy fine sand, we use drilling fluid to help hold the hole open and ream in stages before pulling pipe into the bore.
- Where clay is mapped near La Vernia Road, we adjust the fluid and ream gradually to reduce sticky buildup on the tooling.
- Near Cibolo Creek, the bore profile accounts for the channel and flood prone soil; the drill head is tracked and depth and pitch are logged.
- Before drilling near a marked line on Country Gardens, we expose it by hydrovac potholing; paint gives its position, not its depth.

Which roads, tracks or creeks might a La Vernia bore cross near Country Gardens?
US 87 runs 3.3 mapped roadway miles within La Vernia, while FM 775 accounts for 2.3 miles and FM 1346 for 0.5 miles. Those state routes can require careful planning where a line must pass beneath pavement or the right of way. Country Gardens is the city’s longest named street at 0.83 miles, followed by La Vernia Road at 0.81 miles and Old Seguin Road at 0.74 miles. Each route calls for checking access, existing utilities and the planned bore profile.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 3.3 roadway miles inside | State highway office |
| FM 775 | State highway | 2.3 roadway miles inside | State highway office |
| FM 1346 | State highway | 0.5 roadway miles inside | State highway office |
| Cibolo Creek | Stream | 1.4 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Hollow Creek | Stream | 0.66 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Elm Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad tracks are mapped inside La Vernia or within one mile outside its limits, and none of the city’s mapped street and rail crossings involve a track. Cibolo Creek runs 1.4 channel miles through the city, and Dry Hollow Creek runs 0.66 miles; two street crossings of named streams are mapped. Cibolo Creek is inside La Vernia, and we plan creek crossings by site; no lakes or ponds are mapped within one mile. A creek route needs depth planning, and its jurisdiction is checked during planning.
Whose permission does a bore under US 87 in La Vernia need?
For work on US 87, FM 775 or FM 1346 in La Vernia, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT San Antonio District reviews it. TxDOT’s cover requirements set a bore depth: electric and communication lines need 60 inches below the lowest crossed grade, water needs 60 inches, and pressurized sewer needs 60 inches. The district may set another depth in the permit. Existing highway pavement is bored or tunneled beneath, with the bore extending under all travel lanes on rural highways. La Vernia is incorporated, so we treat Country Gardens as a city street under the city’s jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Wilson County and La Vernia?
The City of La Vernia public water system uses groundwater wells and reports 842 service connections serving 2,526 people. For electric service in Wilson County, utilities reporting to EIA include AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative. Those county reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near US 87 or another La Vernia route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of La Vernia | Public water system | Groundwater wells | 842 connections, 2,526 people served |
| AEP Texas Central, City of Floresville, City of San Antonio, Guadalupe Valley Electric Cooperative and Karnes Electric Cooperative | Electric utilities reporting service in Wilson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put La Vernia’s median housing year at 1993; 14 percent of homes were built before 1960, 54 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean a replacement bore on an established street or a new service run. We hydrovac pothole every marked utility on the bore path before the drill approaches; for a proposed line beneath Old Seguin Road, paint shows position, not depth, so the marked line must be exposed.

What is near La Vernia and Floresville?
La Vernia is in Wilson County at an elevation of 500 feet, and its land area is 2.39 square miles. ZIP code 78121 serves La Vernia, and we use an address on La Vernia Road to identify the proposed underground route. Nearby places include St. Hedwig, 6.7 miles northwest, and New Berlin, 9.4 miles north; Zuehl is 10.6 miles north. Floresville, the county seat and nearest larger city, is 14.5 miles south. From the Yukon main office, the road distance is 485 miles and the drive is 9.1 hours, which affects mobilization for work along FM 775 or Cibolo Creek.
Places near La Vernia
- Directional boring in St. Hedwig: 6.7 miles northwest
- Directional boring in New Berlin: 9.4 miles north
- Directional boring in Zuehl: 10.6 miles north
- Directional boring in Stockdale: 12.7 miles southeast
- China Grove: 13.5 miles west
- Directional boring in Floresville: 14.5 miles south
What boring work comes up near Cibolo Creek in La Vernia?
- Highway crossing: A line beneath US 87 needs a planned bore profile and TxDOT review when work occupies the highway right of way.
- Water service: A connection near the City of La Vernia groundwater system can be routed beneath La Vernia Road without cutting the street.
- Fiber drop: A conduit route beneath Bluebonnet Road can keep the pavement intact while connecting a planned service.
- Creek crossing: A proposed line beneath Cibolo Creek needs a profile that stays below the channel and a jurisdiction check during planning.
- Sewer replacement: A pressurized sewer route near Old Seguin Road can be bored under the street, with the line owner’s permit required for state highway work.
- Drainage route: A bore near Dry Hollow Creek can avoid an open cut across the channel while the route accounts for mapped flood prone soils.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a La Vernia quote near Bluebonnet Road?
For a La Vernia quote, send us the address or map pin, what goes in the ground, pipe or conduit size, footage, and Bluebonnet Road route plans. If the route is near Bluebonnet Road, show the proposed path and any pavement or creek crossing so we can assess the actual work.
The 485 road miles from Yukon are part of mobilization for a La Vernia job, but the route details matter too. Wilco loamy fine sand, clay and any harder ground affect drilling and reaming. A crossing under US 87, a route near Cibolo Creek, pavement, marked utilities, pits, excavator time and sand backfill can change the work involved. Pipe size, bore length and urgent or high profile conditions also shape the scope.
Questions people ask about boring in La Vernia
Does Trinity Boring Solutions take La Vernia jobs in Wilson County, and who staffs them?
Yes, we take directional boring work in La Vernia and across Texas. Our own crews and crews from partner drilling contractors we have vetted carry out the work, while you deal with Trinity from the first call through the bore log. That applies to a route under US 87 as well as one on a local street.
Who controls Old Seguin Road in La Vernia, and does a bore require cutting it?
Old Seguin Road is a city street because La Vernia is incorporated. A bore can pass beneath it without cutting the pavement, subject to the project route and existing utilities. We expose marked lines along the bore path before drilling near them, since surface marks do not show how deep a utility lies.
Can a bore replace older buried lines along La Vernia Road?
Yes, a bore can be planned for a replacement line along La Vernia Road or for a new service. The American Community Survey 2019 to 2023 estimates put the median housing year at 1993, with 14 percent of homes built before 1960. The actual buried line and its owner need to be identified before the route is set.
Will groundwater or flood prone soil affect bore pits near Cibolo Creek in La Vernia?
The USDA survey maps no seasonal water table within 60 inches in La Vernia, but flood prone soils cover 10 percent of the area. Near Cibolo Creek, we plan the bore depth around the channel and site conditions. Pit placement and water handling depend on the specific route and ground encountered.
What soil does a bore pass through in La Vernia near Wilco soil?
Wilco is the most common mapped soil series in La Vernia, covering 40 percent of the area. At about 40 inches down, fine sandy loam is mapped across 39 percent, and average clay content is 27 percent. The survey maps broad soil patterns rather than conditions at a particular bore location.
Is a La Vernia bore likely to hit rock?
Bedrock is mapped within 60 inches across 3 percent of La Vernia, so it is not mapped in the top five feet across most of the area. That does not rule out deeper rock. The geologic map identifies the Ypresian age Wilcox Group, which includes sandstone, shale and siltstone.
Can I reach Trinity after hours about an urgent La Vernia bore on Old Seguin Road?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Old Seguin Road, we can discuss the line, access and route before planning the response. Emergency conditions can affect the scope and mobilization.
How early should I call Texas811 for a La Vernia bore near Country Gardens, and what if marks move?
For a bore near Country Gardens, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. Along FM 775, we use Texas811’s description of the notice period as at least two working days. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects our directional boring costs under US 87 in La Vernia?
The scope of a US 87 bore depends on its length and pipe size, the mapped Wilco soil and any harder ground, and the number of utilities to cross and expose. Pavement, pits, creek or drainage crossings, excavator time, backfill and mobilization from Yukon also affect the work. The utility owner’s permit and required bore depth shape planning.
Where the La Vernia facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside La Vernia
- U.S. Census Bureau, TIGER/Line 2024: La Vernia boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: La Vernia
- U.S. Census Bureau, American Community Survey 2019 to 2023: La Vernia housing units and year built
- Macrostrat geologic map compilation: map units under La Vernia
- U.S. EPA Safe Drinking Water Information System: public water systems serving La Vernia
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Wilson County
- U.S. Geological Survey, Elevation Point Query Service: La Vernia elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to La Vernia
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in La Vernia
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in La Vernia, Texas
Type the address of your job in La Vernia. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for La Vernia
Same county: Poth. All counties: Texas county list.
