Brookshire Texas Directional Boring: Katy Soil, Interstate 10 and Union Pacific Track
Quick Answer: Interstate 10 is a major crossing, and Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Brookshire, Texas. Brookshire is 454 road miles from our Yukon main office, with Union Pacific track also in town. USDA maps Katy soil across 91 percent of Brookshire. Clay loam covers 90 percent of mapped ground at about 40 inches, so staged reaming and prompt pipe pull help manage sticky cuttings.
Brookshire bores at a glance
- Incorporated city in Waller County, Texas. Population 5,782 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 454 miles, about 8.9 hours of driving.
- Ground: Katy soil is mapped on 91 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10, US 90, FM 359, FM 1489 and FM 362. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: Union Pacific, with 6 mapped street and rail crossings.
- Named streams inside the boundary: West Fork of Brookshire Creek and Brookshire Creek.
- Public water: Brookshire Municipal Water District, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles boring near the West Fork of Brookshire Creek in Brookshire?
Trinity Boring Solutions handles directional boring in Brookshire, Waller County, including routes near the West Fork of Brookshire Creek. Interstate 10 is a major obstacle for lines that need to cross town without cutting pavement. The Census Bureau Vintage 2024 estimate puts Brookshire at 5,782 people. We install water, sewer, gas, electric conduit and fiber along routes such as South Street and Waller Avenue.
Our main office is in Yukon, Oklahoma, and Brookshire work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Brookshire Municipal Water District lines and electric networks reported in Waller County make careful locating essential; we have had no utility strike in over 25 years. For Brookshire planning, our family business began in 1965, and we have done directional boring since 1982.

What ground does a bore pass through in Brookshire near Katy soil?
The USDA soil survey maps Katy soil across 91 percent of Brookshire, with Katy fine sandy loam and Katy Urban land complex as the leading map units. Surface texture is fine sandy loam throughout the mapped area. About 40 inches down, clay loam covers 90 percent of the mapped ground and sandy clay loam covers 8 percent; average clay content at that depth is 32 percent. In Brookshire, we treat mapped soil patterns as planning information, not as test borings. The clay rich layer can cling to tooling and pipe, so the actual route still needs field assessment.
| USDA soil survey, inside the Brookshire city limits | What is mapped |
|---|---|
| Soil series mapped | Katy 91 percent and Cyfair 7 percent |
| Texture at the surface | fine sandy loam 100 percent |
| Texture about 40 inches down | clay loam 90 percent and sandy clay loam 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 98 percent |
| Average clay content about 40 inches down | 32 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 15 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 15 percent of the area |
Public mapping shows no bedrock in Brookshire’s top five feet, though deeper rock is still possible. Seasonal water table conditions are mapped within 60 inches across 15 percent of the area, so entry and exit pits may need pumping. In Brookshire, flood prone soils are not mapped, so we do not rely on soil maps as a flood survey. High steel corrosion risk covers 15 percent, a consideration for steel casing and tracer wire; the line owner selects materials. The geologic map identifies the Pleistocene age Lissie Formation, made up of sand, silt, clay and minor gravel.
How do crews bore Brookshire’s clay loam ground?
We adapt the bore plan to Brookshire’s Katy soil and clay loam layer, using controlled fluid and staged reaming to keep the hole workable without pushing excess pressure toward pavement.
- Because Katy soil is mainly fine sandy loam at the surface, we assess the route and prepare the bore path for the clay loam mapped about 40 inches down.
- Brookshire’s clay loam can cling to the reamer, so we use a thinner fluid mix and staged reaming, then pull the pipe soon after opening the hole.
- Before drilling near South Street, we hydrovac pothole marked utilities on the route; paint gives position, not depth, and the drill head is tracked from the surface.
- Where a Brookshire route approaches a creek or a low pit site, we account for the mapped seasonal water table and pump pits if water collects.

What might a Brookshire bore cross near South Street?
Brookshire’s route choices include Interstate 10, US 90, FM 359, FM 1489 and FM 362, all mapped inside the city limits. Interstate 10 accounts for 4.3 roadway miles in town, so a crossing needs a planned bore path beneath the travel lanes. South Street is the longest named street at 1.68 miles, followed by Waller Avenue at 1.28 miles and 5th Street at 1.26 miles. A bore along these streets can leave pavement and driveways uncut, with pits placed off the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 4.3 roadway miles inside | State highway office |
| US 90 | US highway | 2.9 roadway miles inside | State highway office |
| FM 359 | State highway | 2.8 roadway miles inside | State highway office |
| FM 1489 | State highway | 1 roadway miles inside | State highway office |
| FM 362 | State highway | 1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.78 track miles inside | The railroad |
| West Fork of Brookshire Creek | Stream | 1.96 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brookshire Creek | Stream | 0.55 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kellner Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Bessies Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Willow Fork | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.78 track miles in Brookshire on its Smithville Subdivision, and public mapping shows 6 street and rail crossings combined. A track bore needs the railroad’s crossing agreement, with its terms guiding the work. The West Fork of Brookshire Creek runs 1.96 channel miles in town, while Brookshire Creek adds 0.55 miles. Public maps show 8 street crossings of named streams, so creek routes need careful depth planning.
Do I need a permit for a Brookshire bore in Waller County?
For work in Interstate 10, US 90 or an FM road right of way in Brookshire, the utility owner needs a TxDOT utility permit. The TxDOT Houston District reviews the application, which the utility owner submits through the online RULIS system; we prepare the bore plan and profile for that filing. South Street and Waller Avenue are city streets, so the city owns them. A bore under the Union Pacific track needs an agreement from the railroad, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near Brookshire Municipal Water District?
Brookshire Municipal Water District is the local government water system, using groundwater wells to serve 5,364 people through 1,788 service connections. For conduit routes near South Street, we confirm the electric line owner before planning the bore. CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Waller County, but the provider must be identified for the specific route. We hydrovac pothole marked water and electric lines before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Brookshire Municipal Water District | Public water system | Groundwater wells | 1,788 connections, 5,364 people served |
| CenterPoint Energy, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative | Electric utilities reporting service in Waller County | EIA Form 861 | Confirm the line owner by address |
We use Brookshire’s American Community Survey 2019 to 2023 five year estimates of median housing year 1989 as context when planning underground work. We use Brookshire’s home age estimates: 11 percent before 1960, 62 percent from 1960 to 1999, and 27 percent in 2000 or later, for underground planning. That mix can mean replacing an older line or adding a new service. Along Waller Avenue, we expose marked utilities before the drill approaches because locate marks show position, not depth.

How far is Brookshire from Brazos Country and our Yukon yard?
Brookshire is in Waller County at an elevation of 160 feet and covers 4.33 square miles. We use ZIP code 77423 to identify Brookshire when planning directional boring. Pattison is 2.9 miles northwest, Brazos Country is 5.6 miles west, Katy is 6.7 miles east, Fulshear is 7.3 miles southeast and Simonton is 7.4 miles south. Katy is the nearest larger city, while Hempstead, the county seat, is 23.3 miles north. Brookshire is 454 road miles and an 8.9 hour drive from our Yukon, Oklahoma main office, which affects mobilization planning.
Places near Brookshire
- Directional boring in Pattison: 2.9 miles northwest
- Directional boring in Brazos Country: 5.6 miles west
- Directional boring in Katy: 6.7 miles east
- Directional boring in Fulshear: 7.3 miles southeast
- Directional boring in Simonton: 7.4 miles south
What would we bore near Waller Avenue in Brookshire?
- Highway crossing: A bore beneath Interstate 10 keeps the route below the paved travel lanes and avoids cutting across the roadway.
- Water service: A connection near Brookshire Municipal Water District lines needs marked utilities exposed before drilling near the planned route.
- Fiber conduit: A fiber route along Waller Avenue can pass beneath pavement and driveways with entry and exit pits set off the street.
- Creek crossing: A route beneath the West Fork of Brookshire Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A bore beneath Union Pacific track requires the railroad’s agreement before work is planned around the crossing.
- US highway crossing: A route under US 90 needs the utility owner’s TxDOT permit for work in the highway right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Brookshire bore near 10th Street?
A map pin matters near 10th Street because the exact route can change which utilities, pavement or drainage features a bore must pass. Send the Brookshire address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us assess the route and prepare the bore plan.
Brookshire pricing reflects the ground, crossings and logistics. Katy soil and the clay loam mapped below the surface affect drilling fluid and reaming; Interstate 10, Union Pacific track or a creek can add crossing work. Pavement, exposed utilities, pit size, excavator time and sand backfill also shape the job. Mobilization matters at 454 road miles from Yukon, as do high profile or emergency conditions.
Questions people ask about boring in Brookshire
Does Trinity Boring Solutions take Brookshire jobs in Waller County, and who staffs them?
Yes. We take directional boring work in Brookshire, and our own crews or crews from vetted partner contractors handle the field work. A job near South Street is managed by Trinity from the first call through the bore log, so the customer has one point of contact whichever crew is on site.
What is Katy soil like for a bore in Brookshire?
The USDA soil survey maps Katy soil across 91 percent of Brookshire, with fine sandy loam at the surface and clay loam across 90 percent of the mapped area at about 40 inches. That deeper clay can stick to the reamer, so staged passes and prompt pipe installation can help manage the hole.
Will a bore in Brookshire’s ZIP code 77423 hit rock?
The map does not show bedrock in Brookshire’s top five feet, but that does not rule out rock farther down. The local geologic unit is the Pleistocene age Lissie Formation, mapped as sand, silt, clay and minor gravel. Route specific ground conditions still need to guide equipment and planning.
Who approves a Brookshire bore under Interstate 10?
TxDOT handles a utility permit for work in the Interstate 10 right of way, and the TxDOT Houston District reviews it. The utility owner files through RULIS, with our bore plan and profile supporting its application. The permit can set project specific requirements for depth and installation.
What should we plan for when boring beneath Union Pacific track in Brookshire?
A crossing beneath the Union Pacific track requires an agreement from the railroad that owns it. The railroad’s agreement establishes crossing conditions such as casing, depth and flagging. Brookshire has 1.78 track miles on the Union Pacific Smithville Subdivision, so the proposed route must be checked against the specific crossing.
Can you bore a line under the West Fork of Brookshire Creek in Brookshire?
A line can be planned beneath the West Fork of Brookshire Creek, subject to the route and ground conditions. The creek runs 1.96 channel miles within Brookshire. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the bore depth is set with the channel in mind.
Does Katy soil change a Brookshire job 454 road miles from Yukon?
Brookshire is 454 road miles and an 8.9 hour drive from our Yukon main office, so mobilization is part of the job planning. Katy soil also matters: clay loam is mapped below the surface, which can affect reaming and fluid choices. The actual route and scope determine the equipment and crew plan.
How much notice does Texas811 need for a Brookshire bore near South Street?
For a South Street bore, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. File no earlier than 14 days ahead. If work starts more than 14 days after the original notice, make a new request; refresh worn or moved marks through Texas811 before continuing.
What affects the cost of a Brookshire directional bore under Interstate 10?
The route and scope shape the price. Katy soil affects drilling effort, while an Interstate 10 crossing, exposed utilities or a creek can add planning and field work. Pipe size, footage, pavement, pits, excavator time, backfill and mobilization from Yukon also matter, as can high profile or emergency conditions.
Where the Brookshire facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Brookshire
- U.S. Census Bureau, TIGER/Line 2024: Brookshire boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Brookshire
- U.S. Census Bureau, American Community Survey 2019 to 2023: Brookshire housing units and year built
- Macrostrat geologic map compilation: map units under Brookshire
- U.S. EPA Safe Drinking Water Information System: public water systems serving Brookshire
- U.S. Department of Transportation, North American Rail Network: track owners in Waller County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Waller County
- U.S. Geological Survey, Elevation Point Query Service: Brookshire elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Brookshire
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Brookshire
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Brookshire, Texas
Type the address of your job in Brookshire. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Brookshire
Same county: Prairie View · Hempstead · Waller · Pine Island. All counties: Texas county list.
