Simonton Texas Directional Boring: Brazoria Clay, FM 1093 and Bessies Creek
Quick Answer: Brazoria clay can stick to the reamer, so Trinity Boring Solutions plans directional boring, also called horizontal directional drilling (HDD), for routes near Bessies Creek. Simonton is 464 road miles from our Yukon, Oklahoma main office, and FM 1093 is one local crossing to plan around. The USDA soil survey maps heavy clay across 62 percent of the area. That sticky ground calls for staged reaming and careful fluid control.
Simonton bores at a glance
- Incorporated city in Fort Bend County, Texas. Population 662 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 464 miles, about 9.2 hours of driving.
- Ground: Brazoria soil is mapped on 42 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1093 and FM 1489. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bessies Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Bessies Creek in Simonton?
We take directional boring and horizontal directional drilling (HDD) work in Simonton, including water services along FM 1489 and fiber or electric conduit routes near Wagon Road. Simonton is in Fort Bend County, where the Census Bureau Vintage 2024 estimate puts the population at 662. Water, sewer and gas lines can also be planned around Bessies Creek and local streets.
Our main office is in Yukon, Oklahoma, and Simonton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line near Longhorn Road is at the small end of our range; a 48 inch casing for a major crossing near FM 1093 is at the large end. We are a family business started in 1965, and we have done directional boring since 1982, experience we bring to Simonton street and creek work.

What is Brazoria soil like to bore through in Simonton?
The USDA soil survey maps Brazoria soil across 42 percent of Simonton, with Norwood at 37 percent and Clemville at 17 percent. About 40 inches below the surface, clay is mapped under 42 percent of the area, silt loam under 35 percent and silty clay under 17 percent. Average clay content at that depth is 45 percent, and heavy clay is mapped under 62 percent of the city. We use Brazoria and Norwood soil series as planning context, not substitutes for Simonton test borings. Sticky clay can build on a reamer and grip pipe, so the bore plan needs to account for it.
| USDA soil survey, inside the Simonton city limits | What is mapped |
|---|---|
| Soil series mapped | Brazoria 42 percent, Norwood 37 percent, Clemville 17 percent and Alluvial land (miscellaneous area) 4 percent |
| Texture at the surface | clay 42 percent, loam 35 percent and silt loam 14 percent |
| Texture about 40 inches down | clay 42 percent, silt loam 35 percent and silty clay 17 percent |
| Engineering class about 40 inches down | fat clay (CH) 60 percent and lean clay (CL) 39 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 59 percent of the area |
Bedrock is not mapped in the top five feet of Simonton, though the geologic map does not rule out deeper rock. It shows Holocene alluvium, with sand, silt, clay and gravel along streams, so conditions can change near Bessies Creek. Seasonal water tables are not mapped, while flood prone soils cover 2 percent of the area. High steel corrosion risk is mapped under 59 percent, a concern for uncoated steel casing and tracer wire; the line owner selects materials. The clay calls for managed drilling fluid and staged reaming.
How do we drill through Simonton clay?
Brazoria clay and alluvial ground near Bessies Creek call for a bore plan that limits pressure and keeps the hole stable. We track the drill head from the surface and log its depth and pitch.
- Brazoria clay can cling to the reamer and tighten around pipe, so we use thinner drilling fluid with polymer and open the hole in stages.
- Where heavy clay lies near FM 1093, we watch fluid returns and control pressure to reduce the chance of lifting pavement.
- Before the drill approaches marked utilities along Wagon Road, we hydrovac pothole each line on the bore path because surface paint does not show depth.
- For a Bessies Creek route, we plan the bore below the channel, track depth and pitch from the surface, and check jurisdiction during planning.

What is in the way of a new line near Wagon Road in Simonton?
FM 1093 runs 6.3 mapped roadway miles inside Simonton, and FM 1489 adds 1.1 miles. A state highway crossing can set the bore depth and route. Among local streets, Wagon Road runs 1.56 miles, Pony Lane 1.37 miles and Longhorn Road 0.92 miles inside the city. Nails Road adds another 0.88 miles. A route along or across these streets needs a layout that accounts for pavement and marked utilities before drilling begins.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1093 | State highway | 6.3 roadway miles inside | State highway office |
| FM 1489 | State highway | 1.1 roadway miles inside | State highway office |
| Bessies Creek | Stream | 1.78 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brazos River | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Simonton or within one mile of its limits, and none of the mapped street and rail crossings is identified here. Bessies Creek runs 1.78 channel miles through the city, with 11 mapped street crossings of named streams. The Brazos River is 0.1 mile outside the city limits. Those creek and river routes need careful depth planning, and creek work is checked for federal waterway jurisdiction during planning.
Do I need a permit to bore under FM 1093 in Simonton?
At FM 1093, cover requirements help set the bore depth: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches at a crossing. Pressurized sewer lines also need 60 inches at crossings; the TxDOT district may require another depth in its permit. The line owning the utility applies through TxDOT’s RULIS system, with the TxDOT Houston District reviewing the request. For FM 1093 crossings, we prepare the bore plan and profile for a utility owner’s application to the TxDOT Houston District. Simonton’s city streets, including Wagon Road, belong to the city. Bessies Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Fort Bend County near Simonton?
The provider for a specific Simonton address must be confirmed with the city, Fort Bend County or the local water district before planning a bore; available EPA records do not identify a provider tied to the town. CenterPoint Energy reports electric service in the county, but that does not establish who serves each address. We confirm the line owner before planning an electric conduit bore near FM 1489 or another local route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy | Electric utilities reporting service in Fort Bend County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates Simonton’s median housing year at 1979; we use it only as underground planning context. We use Simonton’s estimates of 3 percent before 1960, 83 percent from 1960 to 1999, and 14 percent in 2000 or later as underground planning context. That mix can mean replacement work as well as new services near Longhorn Road. We hydrovac pothole each marked utility on the bore path before drilling near it; for example, a planned line under Nails Road needs marked lines exposed first because paint shows position, not depth.

What is near Simonton and Weston Lakes?
Simonton is an incorporated city in Fort Bend County, with 2.35 square miles of land at an elevation of 113 feet. We use Simonton’s ZIP codes 77485, 77476 and 77441 to identify project locations near Fulshear. Weston Lakes is 2.9 miles southeast, Orchard is 5.1 miles south, Fulshear is 5.3 miles east and Wallis is 6.2 miles southwest. Richmond, the county seat, is 14.4 miles southeast. Our Yukon, Oklahoma main office is 464 road miles away, a 9.2 hour drive, so distance is part of planning a Simonton job.
Places near Simonton
- Directional boring in Weston Lakes: 2.9 miles southeast
- Orchard: 5.1 miles south
- Directional boring in Fulshear: 5.3 miles east
- Directional boring in Wallis: 6.2 miles southwest
- Directional boring in Brazos Country: 6.6 miles northwest
What kinds of bores come up near Longhorn Road in Simonton?
- Highway crossing: A water line under FM 1093 needs a route and depth plan that follows the applicable TxDOT utility permit.
- Water service: A small service near Pony Lane can use directional boring to avoid cutting the street surface along its route.
- Fiber conduit: A conduit route near Longhorn Road needs marked utilities exposed before the drill approaches them.
- Creek crossing: A line beneath Bessies Creek needs depth planning below the channel and a jurisdiction check during planning.
- Road crossing: A route beneath Wagon Road can keep pavement intact while pits sit in dirt on each side.
- River approach: A bore near the Brazos River, 0.1 mile outside Simonton, needs route planning for alluvial ground.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near Nails Road in Simonton?
Start with an address or map pin near Nails Road, FM 1093 or another Simonton route. Tell us what is going underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us see the route, crossings and work area before we scope the bore.
The Yukon yard is 464 road miles from Simonton, so mobilization is part of the job scope. Brazoria clay and alluvial ground near Bessies Creek affect drilling and fluid planning. The route also matters: a crossing of FM 1093, pavement, utilities to expose or a creek can add work. Pipe size and length, pits, excavator time and sand backfill also shape the price. High profile or emergency work changes the plan.
Questions people ask about boring in Simonton
Does Trinity Boring Solutions take jobs in Fort Bend County near Simonton?
Yes. We take directional boring work in Simonton and across Texas, with our own crews and vetted drilling partners staffing jobs from satellite yards. For Bessies Creek planning, we keep communication with you from the first call through the bore log, regardless of which crew handles the work. We can plan routes near Bessies Creek and FM 1489.
Will a bore in Simonton hit rock beneath Brazoria soil?
The USDA soil survey does not map bedrock in the top five feet of Simonton, but that does not rule out deeper rock. The geologic map shows Holocene alluvium around streams, including Bessies Creek, with sand, silt, clay and gravel. Conditions along a specific bore still need to be assessed.
Who approves a bore under FM 1093 in Simonton?
TxDOT reviews a utility owner’s permit application for FM 1093 through the TxDOT Houston District. The utility owner files in the online RULIS system, and we provide the bore plan and profile for that application. The required cover depends on the line type and the approved permit.
Can you bore a line beneath Bessies Creek in Simonton?
A bore can be planned beneath Bessies Creek, which runs 1.78 channel miles through Simonton. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil and access at the specific crossing affect the final bore plan.
Who owns electric lines in Fort Bend County near Simonton?
CenterPoint Energy reports electric service in Fort Bend County, but the report does not identify the provider at every Simonton address. We confirm the line owner before planning an electric conduit bore, including a route near FM 1489. The owner also confirms the conduit specifications for its line.
Can Longhorn Road in Simonton be crossed without cutting the street?
Simonton is incorporated, so its city streets, including Longhorn Road, belong to the city. Directional boring can pass beneath pavement without cutting the street surface, with entry and exit pits placed in dirt where the site allows. Marked utilities on the route are exposed before drilling near them.
What bore sizes and lengths can you handle for a job near Nails Road in Simonton?
Our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A project near Nails Road is scoped around its actual route, pipe or conduit size, ground and crossings. A sketch or plan helps define the work.
How early should I call Texas811 for a bore near Wagon Road in Simonton?
Paint near Wagon Road shows a utility’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks before work continues.
What affects the cost of directional boring under FM 1093 in Simonton?
The price reflects the route and job details, not just footage. Simonton’s 464 road miles from Yukon affect mobilization; Brazoria clay affects drilling, while an FM 1093 crossing can bring permit planning and depth requirements. Pipe size, utility exposure, pavement, creek crossings, pits, excavator time, backfill and emergency timing also affect the scope.
Where the Simonton facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Simonton
- U.S. Census Bureau, TIGER/Line 2024: Simonton boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Simonton
- U.S. Census Bureau, American Community Survey 2019 to 2023: Simonton housing units and year built
- Macrostrat geologic map compilation: map units under Simonton
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Fort Bend County
- U.S. Geological Survey, Elevation Point Query Service: Simonton elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Simonton
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Simonton
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Simonton, Texas
Type the address of your job in Simonton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Simonton
Same county: Sugar Land · Missouri City · Houston · Rosenberg · Mission Bend · Fresno · Cinco Ranch · Stafford · Pecan Grove · Richmond · Four Corners · Katy. All counties: Texas county list.
