trinityboringsolutions.com

Iago Texas Directional Boring: Norwood Silt Loam, FM 1096 and Caney Creek

Quick Answer: Norwood loam is common in Iago, and its sticky clay can cling to a reamer. We do directional boring, also called horizontal directional drilling (HDD), for routes that cross Caney Creek. Iago is 489 road miles from our Yukon, Oklahoma main office, so mobilization matters for work near FM 1096. Silt loam deeper down can wash out with excess fluid, so we control pressure.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Iago bores at a glance

  • Unincorporated community in Wharton County, Texas. Population 148 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 489 miles, about 9.9 hours of driving.
  • Ground: Norwood soil is mapped on 66 percent of the area, with silt loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1096 and FM 1301. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Caney Creek, Gardner Slough and Alligator Slough.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Iago and Caney Creek?

Norwood loam covers much of Iago, and sticky clay can cling to drilling tools. We take directional boring work in Iago, an unincorporated community in Wharton County with 148 residents in the 2020 Census count. Along Iago Street or FM 1096, we install water, sewer, gas, electric conduit and fiber lines by boring where a route needs to pass beneath a road or creek.

Our main office is in Yukon, Oklahoma, and Iago work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Iago Street service work, our range runs from 3/4 inch service lines to 48 inch casing, with bores from 10 feet to 5,000 feet. We are a family business that began in 1965 and has done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Iago ground like in Norwood soil?

Norwood soil is the main mapped series in Iago, and its loam can become sticky around a reamer. The USDA soil survey maps Norwood across 66 percent of the community and Asa across 21 percent. At about 40 inches below the surface, silt loam is mapped under 66 percent of the area, with an average clay content of 28 percent. For Norwood soils in Iago, our mapping shows no sandy area at that depth, though field conditions still guide boring decisions. These are mapped patterns, not test borings, so a route near Caney Creek still needs site specific planning.

USDA soil survey, inside the Iago mapped community boundaryWhat is mapped
Soil series mappedNorwood 66 percent, Asa 21 percent, Clemville 5 percent, Pledger 5 percent and Brazoria 3 percent
Texture at the surfaceloam 57 percent, silty clay loam 26 percent and silt loam 8 percent
Texture about 40 inches downsilt loam 66 percent, silty clay loam 21 percent and clay 8 percent
Engineering class about 40 inches downlean clay (CL) 91 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel12 percent of the area

Along FM 1301 in Iago, our mapping shows no bedrock in the top five feet, but deeper rock remains possible. The survey maps no seasonal water table within 60 inches and flood prone soils across 5 percent of the area. High steel corrosion risk is mapped under 12 percent, which makes casing and tracer wire material worth discussing with the line owner. The geologic map shows Holocene Alluvium along streams, with sand, silt, clay and gravel. Near Caney Creek, changing material may call for adjustments as the bore advances.

How do we bore Iago silt loam without losing control?

Iago has loam near the surface and silt loam deeper down. We adjust drilling fluid and reaming to keep the hole stable without washing out soft ground near Caney Creek.

  1. Norwood loam can make the reamer sticky, so we use thinner fluid and polymer, ream in stages, and plan to pull pipe the day the hole opens.
  2. With silt loam mapped at about 40 inches near FM 1301, we limit fluid pressure beneath pavement because excess flow can wash out soft ground.
  3. Before drilling near a marked utility, we hydrovac pothole it; a line crossing under Iago Street is a local example that needs its depth exposed.
  4. We track the drill head from the surface and log depth and pitch as a bore advances toward Caney Creek, where the channel and changing alluvium matter.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What might a new Iago line cross near FM 1096?

FM 1096 and FM 1301 are the state highways inside Iago, with 5.0 and 3.0 mapped roadway miles in the community. Railroad Street, Allen Road and Iago Street are among the longer named local roads, so a route may need to pass beneath pavement or a driveway. Gift Drive is another named street. Boring can leave those surfaces uncut, with entry and exit pits placed in dirt beside the route. Each alignment needs checking against the actual road and property conditions.

CrossingTypeMapped extentWho has a say
FM 1096State highway5 roadway miles insideState highway office
FM 1301State highway3 roadway miles insideState highway office
Caney CreekStream3.24 channel miles insideChecked for Corps of Engineers jurisdiction
Gardner SloughStream0.67 channel miles insideChecked for Corps of Engineers jurisdiction
Alligator SloughStream0.22 channel miles insideChecked for Corps of Engineers jurisdiction
Bee Tree BayouStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Iago or within 1 mile outside the community boundary, and no street and rail crossing is mapped. If a proposed route reaches a track, the railroad that owns it sets the crossing agreement. Caney Creek runs 3.24 channel miles inside the community, and Gardner Slough and Alligator Slough are also mapped streams. Four street crossings of named streams are mapped. A creek route needs planning for its channel, and no lakes or ponds are mapped within 1 mile.

Who approves boring work in Iago, Wharton County?

FM 1096 and FM 1301 belong to TxDOT, so work in their right of way goes to the TxDOT Yoakum District for review. The utility owner, not our drilling crew, files its utility permit through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application. TxDOT rules call for boring or tunneling under existing highway pavement. Caney Creek crossings are checked for Army Corps jurisdiction during planning. Iago has no city government, so county public streets are handled by the county. Any proposed railroad crossing needs an agreement with the track owner.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines serving Iago in Wharton County?

The water provider for an address on Iago Street or elsewhere in Iago must be confirmed with the county or local water district before planning a bore. EPA drinking water records do not tie a system to this community, and no system name identifies its provider. AEP Texas Central, CenterPoint Energy, Jackson Electric Cooperative and Wharton County Electric Cooperative report service in Wharton County. We confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Wharton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published reliably for a place as small as Iago, so the age of buried lines cannot be inferred from a survey estimate. A project along FM 1096 may involve a long service run or a newer connection, and June is the county’s wettest month at 4.8 inches on average. On Railroad Street, we hydrovac pothole every marked utility along the bore path before drilling nearby. For example, a marked line crossing under Railroad Street must be exposed first; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

What places near Iago, including Boling, do we cover?

Iago is an unincorporated community in Wharton County, at an elevation of 84 feet and with 1.9 square miles of land. Its ZIP code is 77420. Boling is 1.6 miles southeast; Wharton, the county seat and nearest larger city, is 9.1 miles west. Needville is 11.3 miles northeast, and Hungerford and Kendleton are each 12.2 miles away in their listed directions. From our Yukon, Oklahoma main office, Iago is 489 road miles and a 9.9 hour drive, a factor in planning crew and equipment mobilization.

Places near Iago

What boring work may come up along Iago Street in Iago?

  • Water service: A service line near Iago Street can be bored beneath a driveway rather than cutting across its surface.
  • Highway crossing: A route under FM 1096 needs TxDOT review when it occupies highway right of way.
  • Creek crossing: A Caney Creek bore needs an alignment planned below the channel and checked for federal jurisdiction.
  • Fiber route: Conduit along Railroad Street can pass beneath pavement, with marked utilities exposed before drilling nearby.
  • Electric conduit: A crossing near FM 1301 starts with confirming which Wharton County reporting utility owns the line.
  • Drainage crossing: A route near Gardner Slough needs to account for the mapped channel and soft alluvial ground.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of boring near Gift Drive in Iago?

For a bore near Gift Drive, tell us the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us follow the route across Iago Street or toward FM 1096. Include nearby crossings such as Caney Creek so we can understand the access and alignment before preparing a quote.

The 489 road miles from Yukon make mobilization part of planning for a Gift Drive project. Norwood loam and deeper silt loam affect drilling and fluid choices, while crossings of FM 1096 or Caney Creek can add planning and equipment needs. We also consider bore length, pipe size, marked utilities to expose, pavement, pits, excavator time and sand backfill. In Wharton County, high profile or emergency work can change our directional boring scope as we plan each request.

Questions people ask about boring in Iago

Does Trinity take directional boring jobs in Iago, Wharton County, and how are crews assigned?

Yes, we take work in Iago and coordinate it through Trinity, whether the route is near FM 1096 or another local road. Our own crews and crews from vetted partner contractors can staff the work from satellite yards. You deal with Trinity through the bore log, whichever crew is on site.

Can a new line be bored beneath Caney Creek in Iago?

A bore beneath Caney Creek can be planned, but the alignment and ground conditions need review before work begins. The creek has 3.24 channel miles inside Iago, and creek crossings are checked for Army Corps jurisdiction during planning. Soil and channel conditions help determine the bore path and depth.

Which electric company owns the line for a conduit bore in Iago, Wharton County?

The owner for a specific Iago address must be confirmed before planning an electric conduit bore. AEP Texas Central, CenterPoint Energy, Jackson Electric Cooperative and Wharton County Electric Cooperative report service in the county, but that does not identify the provider at every address. We confirm the line owner for the proposed route.

Who is responsible for Iago Street in Iago, and can we bore under it?

Iago has no city government, so its public streets are handled by the county rather than a city department. A bore can be planned beneath Iago Street to avoid cutting the road surface, subject to the route and access conditions. Along Allen Road, we expose marked utilities before drilling near them to verify the bore path.

What ground will a bore pass through in Iago, including Norwood soil?

Norwood is the leading mapped soil series in Iago, covering 66 percent of the community. The USDA soil survey maps silt loam under 66 percent of the area at about 40 inches below the surface, with an average clay content of 28 percent. Our Pledger soil maps show mapped patterns in Iago, not test borings for a specific bore route.

Could a bore near Caney Creek in Iago encounter deeper rock?

Along FM 1301 in Iago, our mapping shows no bedrock in the top five feet, but deeper rock remains possible. The geologic map shows Holocene Alluvium along streams, including Caney Creek, with sand, silt, clay and gravel. A site check and drilling observations guide the response to material changes.

Can I reach someone after hours about an urgent bore near Iago Street in Iago?

Yes, call (405) 409-7423; a person answers 24 hours a day. Tell us whether the urgent work is near Iago Street, FM 1096 or another local feature, and what line or repair is involved. Trinity provides 24 hour emergency response.

How far ahead should I call Texas811 for a bore by Railroad Street in Iago?

The locate request for a Railroad Street bore must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Iago work through the TxDOT Yoakum District, if our start slips more than 14 days past the original notice, we make a new request. Near Gift Drive, we have worn or moved marks refreshed through Texas811 before boring work continues.

What affects directional boring costs near FM 1096 in Iago?

The route and work scope determine the price, not one factor alone. A bore near FM 1096 may involve TxDOT planning, while Norwood loam, deeper silt loam, utility crossings, pavement, creek access, pits and equipment time also matter. Mobilization is affected by Iago’s 489 road miles from our Yukon main office.

Where the Iago facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Iago

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Iago, Texas

Type the address of your job in Iago. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Iago

Same county: El Campo · East Bernard · Louise. All counties: Texas county list.