trinityboringsolutions.com

Louise Texas Directional Boring: Edna Soil, US 59 And Middle Mustang Creek

Quick Answer: US 59 is the main road crossing to plan around, and Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), in Louise, Texas. From our Yukon, Oklahoma main office, Louise is 497 road miles away, with CPKC (Kansas City Southern) track and Middle Mustang Creek also shaping route planning. Edna soil covers 56 percent of the mapped area, while clay is mapped at about 40 inches, so sticky cuttings and hole stability need attention.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Louise bores at a glance

  • Unincorporated community in Wharton County, Texas. Population 889 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 497 miles, about 9.9 hours of driving.
  • Ground: Edna soil is mapped on 56 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 59, FM 1160 and FM 647. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Middle Mustang Creek and East Mustang Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Louise near US 59?

Trinity Boring Solutions takes directional boring work in Louise, Texas, where US 59 is a major route a utility bore may need to cross. Louise is in Wharton County, and the Census Bureau counted 889 residents in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, including routes beneath Victoria Street or FM 1160 when the project plan calls for them.

Our main office is in Yukon, Oklahoma, and Louise work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma; next to that, a Louise job may be a shorter service or utility route near US 59. We stay involved from the first call through the bore log, whichever crew is on site.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Louise ground around Edna soil affect a bore?

The USDA soil survey maps Edna soil across 56 percent of Louise, and its surface texture is loam. Bernard soil accounts for 23 percent and Dacosta soil for 21 percent, with clay loam and sandy clay loam mapped at the surface in those areas. At about 40 inches below the surface, the survey maps clay across 100 percent of the area, with average clay content of 44 percent. Those are mapped soil patterns, not test borings; the deeper clay can cling to a reamer and grip pipe.

USDA soil survey, inside the Louise mapped community boundaryWhat is mapped
Soil series mappedEdna 56 percent, Bernard 23 percent and Dacosta 21 percent
Texture at the surfaceloam 56 percent, clay loam 23 percent and sandy clay loam 21 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches78 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped within the top five feet in Louise, but the geologic map shows Delta sand and silt of Late Pleistocene age, so deeper ground still needs checking along a planned route. A seasonal water table is mapped within 40 inches across 78 percent of the area, which can leave pits wet. In Louise, we do not have mapped flood prone soils to use when planning a boring route. High steel corrosion risk covers 100 percent of the mapped area, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern.

How do we bore Louise clay without losing control of the hole?

For a Louise bore through the clay mapped below Edna soil, we manage fluid and reaming to keep the hole stable and avoid loading the ground with excess pressure.

  1. We choose fluid and reaming stages for Louise’s clay at about 40 inches, which can cling to the reamer and make a pullback harder.
  2. Because a seasonal water table is mapped within 40 inches across 78 percent of Louise, we plan small pits and pumping where conditions call for it.
  3. Before drilling near Victoria Street, we hydrovac marked utilities on the planned path; surface paint shows their position but not their depth.
  4. We track the drill head from the surface and log depth and pitch, including on routes planned near US 59 or Middle Mustang Creek.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a Louise bore have to cross near Middle Mustang Creek?

US 59, FM 1160 and FM 647 run inside the mapped Louise community boundary, so a route between properties may have to pass beneath a highway or its right of way. Victoria Street is the longest named street at 1.23 miles inside the community; FM G47 and Hackberry Street are also among the longest. A bore near these roads needs a route plan that accounts for pavement and existing utilities, rather than assuming the line can follow a straight path.

CrossingTypeMapped extentWho has a say
US 59US highway5.7 roadway miles insideState highway office
FM 1160State highway4.8 roadway miles insideState highway office
FM 647State highway3.9 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad1.56 track miles insideThe railroad
Middle Mustang CreekStream4.49 channel miles insideChecked for Corps of Engineers jurisdiction
East Mustang CreekStream4.09 channel miles insideChecked for Corps of Engineers jurisdiction
Stage Stand CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Plainview Outflow DitchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
West Mustang CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

CPKC (Kansas City Southern) has 1.56 track miles inside Louise, and public mapping shows 6 street and rail crossings in the community. Middle Mustang Creek runs 4.49 channel miles here, while East Mustang Creek runs 4.09; mapped streets cross named streams 9 times. Those track, creek and street intersections can affect the bore path. There are no lakes or ponds mapped within one mile, so creek crossings are the local water feature to focus on.

Do I need a permit to bore in Louise or Wharton County?

A bore beneath US 59, FM 1160 or FM 647 needs a TxDOT utility permit for work in the highway right of way, reviewed by the TxDOT Yoakum District. Electric and communication lines need at least 60 inches of cover at a highway crossing and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer needs 60 inches at crossings. The utility owner applies through RULIS, and we prepare the bore plan and profile for its application. Louise has no city government, so its streets and permits belong to the county or state. A CPKC track crossing needs an agreement with the railroad, and Middle Mustang Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Louise and Wharton County?

EPA drinking water records do not tie systems to Louise, and no system carries the place name, so the provider for a specific address must be confirmed with the county or local water district before a bore is planned. The county electric utilities reporting service are AEP Texas Central, CenterPoint Energy, Jackson Electric Cooperative and Wharton County Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore near Victoria Street or another Louise route.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Wharton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Louise’s median housing year at 1975: 16 percent of homes were built before 1960, 66 percent from 1960 to 1999, and 18 percent in 2000 or later. That mix can mean replacement work as well as new services near Victoria Street. Before drilling close to marked lines, we hydrovac pothole them to see their depth; paint alone shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Louise and nearby Ganado?

Louise is an unincorporated community in Wharton County, at an elevation of 82 feet across 6.68 square miles. Its ZIP code is 77455. Ganado is 7.7 miles southwest, and El Campo is 10.4 miles northeast; El Campo is the nearest larger city. Wharton, the county seat, is 23.4 miles northeast. Louise is 497 road miles and a 9.9 hour drive from our Yukon, Oklahoma main office, so that distance is part of planning mobilization for work near US 59 or Middle Mustang Creek.

Places near Louise

What kinds of bores come up in Louise near Victoria Street?

  • Highway crossing: A bore beneath US 59 needs a planned path under the travel lanes and around utilities beside the road.
  • Street service: A water or sewer line beneath Victoria Street can avoid cutting pavement when pits fit on each side of the route.
  • Rail crossing: Work beneath the CPKC (Kansas City Southern) track needs an agreement from the railroad before the crossing is planned.
  • Creek crossing: A route under Middle Mustang Creek needs depth planning and a check for Corps jurisdiction during project planning.
  • Fiber conduit: A conduit route near FM 1160 needs marked utilities exposed before the drill approaches them.
  • Electric conduit: Before planning a conduit bore near FM 647, we confirm which utility owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Louise work near CPKC (Kansas City Southern)?

For a Louise bore near CPKC (Kansas City Southern), send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. A route drawing that shows US 59, a creek or the rail track can clarify the crossings we need to plan around.

A simple route with no difficult crossings is easier to plan than a bore through Louise’s heavy clay or beneath CPKC track. The quote depends on length, pipe size, ground conditions, utilities that must be crossed and exposed, pavement, creek access, pits and equipment time. US 59 or Middle Mustang Creek can add crossing details, while the 497 road miles from Yukon affect mobilization. Emergency timing or a high profile route can also change the work plan.

Questions people ask about boring in Louise

Does Trinity take directional boring jobs in Louise and Wharton County?

Yes. Trinity Boring Solutions takes directional boring work in Louise, Wharton County, and across Texas. Our Yukon office coordinates with our crews and vetted drilling partners for the project. We remain your point of contact from the first call through the bore log, including for a route near US 59.

What ground should I expect for a Louise bore through Edna soil?

The USDA soil survey maps Edna soil across 56 percent of Louise, with loam at the surface and clay at about 40 inches. Clay is mapped at that depth throughout the area, so the drill plan must account for sticky cuttings and possible grip on the pipe. These are mapped patterns, not site borings.

Will directional boring in Louise hit rock?

Bedrock is not mapped within the top five feet in Louise, but that does not rule out deeper rock. The geologic map identifies Delta sand and silt of Late Pleistocene age. We still plan from the route and project information, since mapped ground is not a substitute for checking site conditions.

Who approves a Louise bore beneath US 59?

TxDOT reviews a utility permit for work in the US 59 right of way through its Yoakum District. The utility owner submits the application in RULIS, with the bore plan and profile prepared for that filing. Required cover depends on the line type and whether it crosses the highway or runs along the right of way.

What does a Louise crossing under CPKC (Kansas City Southern) need?

A crossing under the CPKC (Kansas City Southern) track needs an agreement from the railroad that owns it. That agreement sets the crossing requirements, including casing, depth and flagging. Louise has 1.56 track miles mapped inside the community, so the track location matters when setting a route.

Can a line be bored under Middle Mustang Creek in Louise?

A line can be planned to pass beneath Middle Mustang Creek, subject to the route and site conditions. The creek runs 4.49 channel miles inside the mapped Louise community boundary. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the bore depth is planned around the channel.

How much 811 notice does a Louise bore near Victoria Street need?

For a bore near Victoria Street, request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Louise schedules, we account for Texas811’s description of that as at least two working days. If the start slips more than 14 days past the notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

How far is Louise from Yukon, and does El Campo help with the job?

From our Yukon, Oklahoma main office, we cover 497 road miles and a 9.9 hour drive to plan directional boring in Louise. El Campo is 10.4 miles northeast of Louise, but the job plan still depends on the address, route and scope. Distance from Yukon can affect mobilization for work near US 59 or Middle Mustang Creek.

What affects our directional boring cost near US 59 in Louise?

The price depends on the route and scope, including bore length, pipe size, Louise’s clay, and how many utilities need to be crossed and exposed. Pavement at US 59, a Middle Mustang Creek crossing, pits and equipment time can also affect the work. Mobilization from Yukon is another factor for this location.

Where the Louise facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Louise

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Louise, Texas

Type the address of your job in Louise. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Louise

Same county: Wharton · East Bernard · Boling · Hungerford · Iago. All counties: Texas county list.