Balmorhea Texas Directional Boring: Silty Clay Loam, Main Canal and Toyah Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Balmorhea, where a route may need to pass Main Canal without cutting its banks. The Yukon main office is 562 road miles away, and that distance matters for work along Interstate 10 Business. USDA maps show Balmorhea silty clay loam across 77 percent of the city, so sticky cuttings can build on a reamer. We plan fluid, staged reaming and pipe pull timing around that clay.
Balmorhea bores at a glance
- Incorporated city in Reeves County, Texas. Population 391 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 562 miles, about 10.9 hours of driving.
- Ground: Balmorhea soil is mapped on 77 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10 Business, Texas State Highway 17, FM 2903 and FM 2093. State permit office: TxDOT Odessa District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Main Canal, Sandia Creek and Toyah Creek.
- Public water: City of Balmorhea, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring across Balmorhea’s Main Canal?
Trinity Boring Solutions takes directional boring work in Balmorhea, Reeves County, where the Census Bureau Vintage 2024 estimate puts the population at 391. Main Canal is a key crossing to plan around. We install water, sewer, gas, electric conduit and fiber lines along routes such as Main Street or toward the canal, with the route and line type setting the bore plan.
Our main office is in Yukon, Oklahoma, and Balmorhea work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A Main Canal job can range from a 3/4 inch service line to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, experience we bring to routes through Balmorhea silty clay loam.

What does the soil survey show beneath Balmorhea?
The USDA soil survey maps Balmorhea silty clay loam across 77 percent of Balmorhea and Toyah soil across the remaining 23 percent. At about 40 inches, the mapped texture is clay loam under 86 percent of the city and sandy clay loam under 14 percent. The survey reports an average clay content of 33 percent at that depth, while heavy clay is mapped under 77 percent. We use the Balmorhea and Toyah soil series as mapped patterns, not as test borings. Clay can stick to the reamer and grip the pipe, so the bore plan needs controlled fluid and staged reaming.
| USDA soil survey, inside the Balmorhea city limits | What is mapped |
|---|---|
| Soil series mapped | Balmorhea 77 percent and Toyah 23 percent |
| Texture at the surface | silty clay loam 77 percent, clay loam 14 percent and loam 9 percent |
| Texture about 40 inches down | clay loam 86 percent and sandy clay loam 14 percent |
| Engineering class about 40 inches down | fat clay (CH) 77 percent and lean clay (CL) 23 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 77 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 77 percent of the area |
Bedrock is not mapped in the top five feet across Balmorhea, though deeper rock is not ruled out. A seasonal water table is mapped within 60 inches under 77 percent of the area, so pits may need pumping; none is mapped within 40 inches. In Reeves County, we do not treat the absence of mapped flood prone soils as a substitute for checking a boring site. High steel corrosion risk covers 77 percent, a factor for casing and tracer wire materials. The geologic map includes Alluvium of Holocene age and Cenozoic sedimentary rocks of Paleocene age, so actual conditions still need field checks.
How do we drill Balmorhea’s clay loam?
Balmorhea’s mapped clay loam calls for a controlled fluid plan and a steady path. Along Main Canal, we also plan the bore depth and entry pits around the channel and the marked lines on the route.
- On Balmorhea silty clay loam, we use a thinner fluid plan and ream in stages so sticky cuttings do not load the reamer.
- Because clay can grip pipe, we have the line ready and plan the pull for the day the hole is opened along a Main Street route.
- Where seasonal water table mapping reaches within 60 inches in Balmorhea, we keep pits compact and pump water if they fill.
- At Main Canal or a marked street crossing, we daylight each marked utility, then track the drill head and log depth and pitch.

Where might a line go under Main Street in Balmorhea?
A Balmorhea bore may cross Interstate 10 Business or follow one of the city’s longer streets, so the route decides whether the work needs a roadway crossing plan. Interstate 10 Business has 0.4 mapped roadway miles inside the limits, while Interstate 10 lies 1.3 miles outside them. Main Street runs 1.15 miles in the city, Railroad Avenue 0.78 miles and 3rd Street 0.65 miles. Boring can keep pavement and driveways uncut, with entry and exit pits placed off the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 Business | Interstate | 0.4 roadway miles inside | State highway office |
| Texas State Highway 17 | State highway | 0.7 roadway miles inside | State highway office |
| FM 2903 | State highway | 0.1 roadway miles inside | State highway office |
| FM 2093 | State highway | 0.1 roadway miles inside | State highway office |
| Interstate 10 | Highway nearby | 1.3 miles outside | State highway office |
| Main Canal | Stream | 0.66 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sandia Creek | Stream | 0.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Toyah Creek | Stream | 0.47 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Giffen Canal | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Saragosa Spring | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Reeves County Water Improvement Canal | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Canyon Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Balmorhea or within one mile outside the limits, and no street and rail crossing is mapped in the city. Main Canal, Sandia Creek and Toyah Creek run through the city, with 21 mapped street crossings of named streams. Those channels can shape a bore route and its depth. No lakes or ponds are mapped within one mile, so creek and canal conditions are the local water crossing concern.
Who approves a Balmorhea bore under Interstate 10 Business?
For an electric or communication line crossing Interstate 10 Business, TxDOT rules set at least 60 inches of cover below the lowest point of the crossed grade; a line running along the right of way needs 48 inches. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer crossings need 60 inches. The utility owner applies through TxDOT’s online RULIS system, and the TxDOT Odessa District reviews it. We prepare the bore plan and profile for the owner’s filing. Existing highway pavement is bored or tunneled, and the permit can set another depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Reeves County in Balmorhea?
The City of Balmorhea public water system uses groundwater wells and reports 210 service connections serving 406 people. That makes the water system a key locate on routes near Main Street or the city limits. Utilities reporting electric service in Reeves County are AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Rio Grande Electric Cooperative. We confirm the line owner for the specific route before planning an electric conduit bore; the county list does not identify the provider at every Balmorhea address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Balmorhea | Public water system | Groundwater wells | 210 connections, 406 people served |
| AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Rio Grande Electric Cooperative | Electric utilities reporting service in Reeves County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Balmorhea’s median housing year at 1959; 55 percent of homes were built before 1960, 37 percent from 1960 to 1999 and 8 percent in 2000 or later. That mix can mean both replacement work and new service runs. Before drilling near a marked line, we expose it with hydrovac potholing because paint does not show its depth. If a marked utility lies beneath Main Street, we daylight it before the drill approaches.

What is near Balmorhea and how far is Fort Davis?
Balmorhea is in Reeves County, covers 0.51 square miles and sits at an elevation of 3,197 feet. For Main Street work, ZIP code 79718 serves Balmorhea, helping us identify the city area for underground planning. Toyah is 23.0 miles north, and Fort Davis is 29.3 miles south. Pecos is the Reeves County seat and the nearest larger city, 31.1 miles northeast. Our Yukon yard is 562 road miles away, a drive of 10.9 hours. That distance affects how we plan mobilization for a bore on Main Street or near Interstate 10 Business.
Places near Balmorhea
- Directional boring in Toyah: 23 miles north
- Directional boring in Fort Davis: 29.3 miles south
- Lindsay: 29.4 miles northeast
- Town of Pecos: 31.1 miles northeast
- Directional boring in Barstow: 39 miles northeast
Which Balmorhea jobs call for a bore near Railroad Avenue?
- Highway crossing: A route under Interstate 10 Business uses a bore plan that accounts for the TxDOT cover depth and the full roadway crossing.
- Water service: A connection near Main Street can tie into the City of Balmorhea system, whose public wells supply the local network.
- Fiber conduit: A run along Railroad Avenue can stay below the street surface, with marked lines exposed before drilling near them.
- Canal crossing: A route beneath Main Canal can keep the channel surface uncut while the bore depth and entry pits are planned.
- Creek crossing: A Sandia Creek bore needs a route planned around the channel and a check for Corps jurisdiction during planning.
- Service extension: A line toward Toyah Creek can use a bore to avoid open cutting across the channel side of the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Balmorhea bore near 1st Street?
A map pin matters in Balmorhea because a route near 1st Street may have different marked lines or crossing conditions than one beside Main Canal. For a crossing by Texas State Highway 17, send us the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans help us see the route and identify crossings before we scope the work.
Price starts with the 562 road miles from Yukon, then the Balmorhea ground and route. Balmorhea silty clay loam can affect fluid and reaming, while a Main Canal crossing or Interstate 10 Business crossing adds planning and exposure work. Pipe size and bore length matter, as do the number of utilities to expose, pavement or concrete, pits, excavator time and sand backfill. At Toyah Creek, high profile or emergency work can change the scope of our crossing.
Questions people ask about boring in Balmorhea
Does Trinity Boring Solutions take jobs in Balmorhea and Reeves County, and how are crews assigned?
Yes, we take directional boring work in Balmorhea and across Reeves County. Our Yukon main office coordinates each job, and we use our own crews or crews from satellite yards run by drilling partners we have vetted. You work with Trinity through the bore log, including on a route near Main Canal.
Who approves a Balmorhea bore under Interstate 10 Business?
TxDOT reviews a utility owner’s permit application for work under Interstate 10 Business through the TxDOT Odessa District. The utility owner files in the online RULIS system, and we prepare the bore plan and profile for its application. The permitted cover depth guides the route beneath the highway.
Can a line be bored beneath Main Canal in Balmorhea?
A line can be planned beneath Main Canal, with the route, depth and entry pits set for the channel conditions. During planning, we check Sandia Creek crossings for US Army Corps of Engineers jurisdiction. We also expose marked utilities near the bore path before drilling approaches them.
Who runs Balmorhea’s public water system, and does it get water from groundwater wells?
In Reeves County, the City of Balmorhea owns the public water system, and we account for its groundwater wells when planning underground work. The system reports 210 service connections serving 406 people. We account for those water lines when planning a bore near Main Street or another route in the city.
Which electric line owner should I check in Balmorhea and Reeves County before a conduit bore?
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Rio Grande Electric Cooperative report electric service in Reeves County. The exact owner depends on the route and address, so we confirm it before planning a conduit bore near Main Canal or Main Street.
Does the city or county control Balmorhea streets like 3rd Street, and must we cut them?
Balmorhea is incorporated, so its city streets, including 3rd Street, belong to the city rather than the county. A bore can pass beneath pavement without open cutting the street, subject to the route and applicable approvals. Pits sit off the traveled surface where access allows.
Does Balmorhea service extend to Toyah and nearby rural sites with Toyah soil?
We take work in Balmorhea, nearby Toyah and rural areas beyond the city limits. Toyah is 23.0 miles north of Balmorhea, and mapped Toyah soil also occurs within the city. The address, access and ground along the route determine the crew and equipment plan.
How early should I request Texas811 marks for a Balmorhea bore near Main Street?
For a bore near Main Street, request Texas811 locates at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. The ticket lasts 20 days from the planned start. If marks wear off or move, have them refreshed through Texas811 before work continues.
What affects the cost of a Balmorhea bore under Interstate 10 Business?
The scope sets the price, starting with mobilization from the Yukon office, 562 road miles away. Interstate 10 Business crossings, Balmorhea clay, bore length, pipe size and marked utilities all affect the plan. Pavement, creek crossings, pits, excavator time, backfill and emergency timing can also change the work involved.
Where the Balmorhea facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Balmorhea
- U.S. Census Bureau, TIGER/Line 2024: Balmorhea boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Balmorhea
- U.S. Census Bureau, American Community Survey 2019 to 2023: Balmorhea housing units and year built
- Macrostrat geologic map compilation: map units under Balmorhea
- U.S. EPA Safe Drinking Water Information System: public water systems serving Balmorhea
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Reeves County
- U.S. Geological Survey, Elevation Point Query Service: Balmorhea elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Balmorhea
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Balmorhea
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Balmorhea, Texas
Type the address of your job in Balmorhea. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Balmorhea
Same county: Lindsay · Pecos. All counties: Texas county list.
