trinityboringsolutions.com

Lindsay Texas Directional Boring: Normangee Clay, US 82 and Montague Creek

Quick Answer: US 82 and Montague Creek are the main crossings to plan around; Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Lindsay, Texas. The Lindsay site is 152 road miles from our Yukon, Oklahoma main office, with J M Lindsay Boulevard running through town. USDA soil maps show clay across 73% of the area at 40 inches. Sticky clay can build on a reamer, so crews manage the fluid and open the hole in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lindsay bores at a glance

  • Incorporated city in Cooke County, Texas. Population 1,264 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 152 miles, about 3 hours of driving.
  • Ground: Normangee soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 23 percent of the area.
  • Highways inside the boundary: US 82, FM 1199 and FM 3108. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Montague Creek and Elm Fork Trinity River.
  • Public water: City of Lindsay, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Montague Creek in Lindsay?

Montague Creek is one of the crossings to consider, and we take directional boring work in Lindsay, Cooke County. The Census Bureau Vintage 2024 estimate puts Lindsay at 1,264 people. We install water, sewer, gas, electric conduit and fiber, routing lines along streets such as Willow Street or beneath US 82 when the site plan calls for a crossing.

Our main office is in Yukon, Oklahoma, and Lindsay work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have drilled directionally since 1982. Four decades of boring experience helps us plan for Lindsay’s mapped Normangee clay and changing ground conditions.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Normangee soil in Lindsay?

The USDA soil survey maps Normangee as the leading soil series in Lindsay, covering 33% of the area. Normangee clay loam, 1 to 5 percent slopes, eroded, covers 22%, and Normangee clay loam, 1 to 3 percent slopes, covers 12%. Surface texture is clay loam across 61% of the area and clay across 13%. At about 40 inches below the surface, clay is mapped across 73%. The map describes broad ground patterns, so the bore plan still has to account for the actual route.

USDA soil survey, inside the Lindsay city limitsWhat is mapped
Soil series mappedNormangee 33 percent, Wilson 27 percent, Lindy 21 percent, Tinn 8 percent and Slidell 5 percent
Texture at the surfaceclay loam 61 percent, loam 21 percent and clay 13 percent
Texture about 40 inches downclay 73 percent and bedrock 23 percent
Engineering class about 40 inches downfat clay (CH) 49 percent and lean clay (CL) 27 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches23 percent of the area (23 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The soil survey maps bedrock within 60 inches in 23% of Lindsay, with a typical mapped depth of 29 inches. That limestone can slow a bore or steer the head off line where soil meets rock. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 6%, so a Montague Creek crossing still needs channel depth planning. High steel corrosion risk is mapped across 99%; the line owner should choose protection for steel casing or tracer wire, while HDPE avoids that soil corrosion concern. The geologic map includes Quaternary alluvial sand, silt, clay, and gravel, plus Cretaceous Fort Worth limestone and Duck Creek Formation.

How do crews bore Lindsay clay without losing the line?

Normangee clay and the limestone mapped around Lindsay call for a controlled bore, not a fast pull. We choose the setup for the ground and the route, then check the head as it advances.

  1. In Lindsay’s clay rich ground, we use drilling fluid suited to the soil and ream in stages so sticky material does not pack onto the cutting head.
  2. At a Montague Creek route, we watch fluid returns and pressure closely; excess pressure can lift pavement, so the crew adjusts the drilling pace.
  3. We track the drill head from the surface and record depth and pitch, especially where the mapped limestone may meet the alluvial soil around Lindsay.
  4. Before drilling near a marked utility, we expose it with hydrovac potholing because paint near Willow Street shows position, not depth.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect a Lindsay bore near US 82?

US 82 runs 2.7 roadway miles within Lindsay, with FM 1199 covering 1.4 miles and FM 3108 covering 0.5 miles. A route under any of those roads needs a plan that protects the pavement and stays within the permitted right of way. J M Lindsay Boulevard is the longest named street at 2.6 miles in town. Willow Street covers 0.99 miles, and 1st Street covers 0.79 miles. Those street routes can call for service bores that leave pavement and driveways intact.

CrossingTypeMapped extentWho has a say
US 82US highway2.7 roadway miles insideState highway office
FM 1199State highway1.4 roadway miles insideState highway office
FM 3108State highway0.5 roadway miles insideState highway office
Montague CreekStream0.61 channel miles insideChecked for Corps of Engineers jurisdiction
Elm Fork Trinity RiverStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Scott CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Dozier CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Willow CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Lindsay or within one mile of its limits, so no local track crossing is identified. Montague Creek runs 0.61 channel miles through town, and the Elm Fork Trinity River runs 0.5 miles. Public mapping shows two street crossings of named streams, so a route near either channel needs careful depth planning. No lakes or ponds are mapped within one mile, and 1.14 miles of unnamed drainage are mapped in town.

Who signs off on a Lindsay bore in Cooke County?

Lindsay is an incorporated city, so Willow Street and other city streets belong to the city. US 82, FM 1199 and FM 3108 are state roads; work in their right of way needs a TxDOT utility permit reviewed by the Wichita Falls District. The utility that owns the line files through TxDOT’s RULIS system, while we prepare the bore plan and profile and work under its permit. TxDOT requires boring or tunneling beneath existing highway pavement. A Montague Creek crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near the City of Lindsay water system?

The City of Lindsay public water system uses groundwater wells and serves 1,050 people through 510 service connections. Before a bore near that system, the route needs to account for existing water lines. Electric service reported in Cooke County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric Cooperative. We confirm the line owner before setting conduit specifications for a route along J M Lindsay Boulevard.

Line ownerWhat it isSourceSize
City of LindsayPublic water systemGroundwater wells510 connections, 1,050 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Cooke CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Lindsay a median housing year of 1993. They show 14% of housing built before 1960, 44% from 1960 to 1999 and 42% in 2000 or later. A replacement bore near Willow Street may need to pass older buried services, while a new service may follow newer development. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows location, not depth. For example, a proposed line under Willow Street needs marked lines exposed before the drill approaches.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Where is Lindsay in relation to Gainesville and our Yukon yard?

Lindsay is an incorporated city in Cooke County, with 1.63 square miles of land and an elevation of 792 feet. Its ZIP codes are 76250 and 76240. Gainesville, the county seat and nearest larger city, is 4.1 miles east. Myra is 5.6 miles west, Muenster is 9.0 miles west, Oak Ridge is 10.4 miles east, and Valley View is 12.0 miles south. Lindsay is 152 road miles and a 3.0 hour drive from our Yukon, Oklahoma yard, a factor in mobilizing equipment for a US 82 crossing.

Places near Lindsay

What would we bore near Willow Street in Lindsay?

  • Highway crossing: A bore beneath US 82 keeps the roadway uncut, with the route and equipment planned for the highway right of way.
  • Water service: A service near the City of Lindsay system can use a bore to connect a property without trenching across Willow Street.
  • Creek crossing: A line near Montague Creek needs a planned channel depth and a check for federal waterway jurisdiction during planning.
  • Fiber route: A fiber bore along J M Lindsay Boulevard can pass beneath paved access while keeping the drill path clear of marked utilities.
  • Street replacement: A replacement line near 1st Street can be bored beneath the street after the existing utilities along the route are exposed.
  • Farm and acreage service: A longer service near FM 1199 can use a bore to cover distance while limiting cuts across paved access.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near J M Lindsay Boulevard?

For a quote near J M Lindsay Boulevard, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route matters in Lindsay, so show nearby streets, US 82 or Montague Creek when they are part of the work area.

Normangee clay is the first cost variable because sticky material can load the reamer and call for staged passes. Rock, the size and length of the line, and utilities that must be exposed also change the work. A crossing beneath US 82 brings pavement and right of way requirements into the plan; a Montague Creek route adds a water crossing to assess. Pits, excavator time, sand backfill, emergency timing and the 152 road miles from Yukon can also affect the price.

Questions people ask about boring in Lindsay

Does Trinity Boring Solutions take directional boring jobs in Lindsay, Cooke County?

Yes. We take directional boring work in Lindsay, Cooke County, and staff it with our own crews or partner contractor crews from satellite yards that Trinity has vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site. US 82 and Montague Creek are local route features to include when scoping the job.

Who owns electric lines in Lindsay and Cooke County, and who confirms conduit specs?

Cooke County electric reporting lists Oncor Electric Delivery Company, Texas-New Mexico Power and four cooperatives, but that does not establish which utility serves a particular Lindsay address. The line owner is confirmed before a conduit bore, and that owner can confirm the required conduit specifications. Include the street or route, such as J M Lindsay Boulevard, when identifying the work area.

Who controls 1st Street in Lindsay, and does a utility bore have to cut it?

1st Street is a city street because Lindsay is incorporated. A directional bore can pass beneath the street without cutting its pavement, if the route and site conditions allow. We expose marked utilities before drilling near them, so a proposed crossing under 1st Street needs potholes at the marked line locations.

How old are homes and buried lines near Willow Street in Lindsay?

The American Community Survey 2019 to 2023 estimates put the median housing year in Lindsay at 1993. Older homes do not establish the age of every buried line, but replacement work near Willow Street should account for existing services and expose marked utilities before drilling. Newer service work still needs its route checked against lines already in the ground.

Does Normangee soil in Lindsay corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 99% of Lindsay, including areas with Normangee soil. The line owner selects protection for steel casing or tracer wire. HDPE is not affected by that soil corrosion concern. The bore plan near Montague Creek should identify the pipe material and any casing before the route is priced.

What ground does a bore pass through in Lindsay’s Normangee soil?

The USDA soil survey maps Normangee across 33% of Lindsay, with clay loam and clay common at the surface. At about 40 inches, clay is mapped across 73% of the area. Sticky clay can load a reamer, while mapped limestone may slow the drill where soil meets rock. A route near US 82 needs to be planned for those changes.

Can I reach Trinity after hours about an urgent bore near 1st Street in Lindsay?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for an urgent bore near 1st Street. Tell us where the work is, what line needs to go in and whether the route is near US 82 or a marked utility so we can understand the site.

How much notice does Texas811 need for a Lindsay bore near J M Lindsay Boulevard?

Paint shows where a marked line runs, not how deep it is. For work near J M Lindsay Boulevard, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near US 82 in Lindsay?

The price depends on the route and scope near US 82, not just the footage. Lindsay’s clay and possible limestone affect drilling time; the line size and length, utilities to expose, pavement, creek crossings, pits and equipment needs also matter. Mobilization from the Yukon yard is another factor for this 152 road mile trip.

Where the Lindsay facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lindsay

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lindsay, Texas

Type the address of your job in Lindsay. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lindsay

County: Reeves County directional boring. Same county: Lake Kiowa · Road Runner · Callisburg · Oak Ridge · Balmorhea · Toyah · Pecos. All counties: Texas county list.