trinityboringsolutions.com

San Saba Texas Directional Boring: Nuvalde Clay, San Saba River, US 190

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in San Saba, where a route may cross the San Saba River or Mill Creek. San Saba is 370 road miles from our Yukon, Oklahoma main office, so Wallace Street mobilization is part of planning. Nuvalde soil and clay at about 40 inches can grip a reamer and pipe, so we control fluid and ream in stages. US 190 pavement and the Central Texas and Colorado River Railway also shape route and access planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

San Saba bores at a glance

  • County seat of San Saba County, Texas. Population 2,866 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 370 miles, about 7.7 hours of driving.
  • Ground: Nuvalde soil is mapped on 30 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 23 percent of the area.
  • Highways inside the boundary: US 190, Texas State Highway 16, FM 1031 and FM 1030. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: Central Texas and Colorado River Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: San Saba River and Mill Creek.
  • Public water: City of San Saba, groundwater wells.
  • Electric: City of San Saba municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in San Saba County?

The City of San Saba owns its municipal electric system, and the City of San Saba public water system uses groundwater wells, so we confirm existing lines before a bore near Brown Street or Commerce Street. The Census Bureau Vintage 2024 estimate puts San Saba at 2,866 residents. We install water, sewer, gas, electric conduit and fiber along streets such as Wallace Street, with the route set by the line owner and site.

Our main office is in Yukon, Oklahoma, and San Saba work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have drilled directionally since 1982. Four decades of boring matter in San Saba, where clay rich mapped ground calls for attention to fluid, reaming and pipe pull timing.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore plan for in San Saba near Nuvalde soil?

San Saba has mapped Nuvalde, Frio and Roughcreek soils that can change how a bore holds its line. The USDA soil survey maps Nuvalde across 30 percent of the city and Frio across 24 percent. At about 40 inches below the surface, clay covers 26 percent of the mapped area and silty clay another 25 percent; the average clay content there is 39 percent. At that depth in San Saba, we have no mapped sandy area for the bore. These are soil survey patterns, not test borings, so the route still needs field verification.

USDA soil survey, inside the San Saba city limitsWhat is mapped
Soil series mappedNuvalde 30 percent, Frio 24 percent, Roughcreek 23 percent, Sagerton 18 percent and Leeray 4 percent
Texture at the surfaceclay loam 49 percent, silty clay loam 23 percent and very stony clay loam 23 percent
Texture about 40 inches downclay 26 percent, silty clay 25 percent and bedrock 23 percent
Engineering class about 40 inches downlean clay (CL) 63 percent and fat clay (CH) 14 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches23 percent of the area (23 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils24 percent of the area
High corrosion risk for uncoated steel91 percent of the area

The USDA soil survey maps bedrock within 60 inches across 23 percent of San Saba, with typical depth listed as 18 inches where it occurs. The Smithwick Formation, described as siltstone, mudstone and sandstone, is mapped here and dates to the Moscovian. That contact can slow drilling and affect steering. Seasonal water tables are not mapped, while flood prone soils cover 24 percent, including ground relevant to the San Saba River. High steel corrosion risk is mapped across 91 percent, so the line owner should weigh casing and tracer wire materials; HDPE avoids that steel concern.

How do we drill San Saba clay without losing the line?

For San Saba clay, we manage the fluid and ream in stages so sticky cuttings do not load the tool or grip the pipe. The Nuvalde and Frio map units guide the plan, not replace field checks.

  1. For Nuvalde clay and the mapped silty clay, we use controlled fluid and staged reaming so sticky cuttings do not build up on the reamer.
  2. Because clay can swell around pipe, we plan the pull soon after opening the final hole, especially where a San Saba route has a tight work window.
  3. At the 23 percent of San Saba mapped with bedrock within 60 inches, we allow for slower progress and watch steering where soil meets rock.
  4. Near the San Saba River’s mapped channel, we plan the crossing depth and check jurisdiction during planning; pits stay on the banks rather than cutting across them.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a San Saba bore pass under the San Saba River?

San Saba bores can cross US 190, Texas State Highway 16, FM 1031 or FM 1030, so the road owner and route determine the plan. Wallace Street is the longest named street at 2.84 miles, followed by Commerce Street at 2.1 miles and Brown Street at 1.91 miles. A bore beneath existing highway pavement avoids cutting across the travel surface. Street access, pavement and the selected alignment affect where entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
US 190US highway3.5 roadway miles insideState highway office
Texas State Highway 16State highway1.2 roadway miles insideState highway office
FM 1031State highway1 roadway miles insideState highway office
FM 1030State highway0.6 roadway miles insideState highway office
Central Texas and Colorado River RailwayRailroad2.19 track miles insideThe railroad
San Saba RiverStream3.47 channel miles insideChecked for Corps of Engineers jurisdiction
Mill CreekStream1.26 channel miles insideChecked for Corps of Engineers jurisdiction
Simpson CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Barnett Springs CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Jerrys BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Dry Simpson CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Central Texas and Colorado River Railway has 2.19 track miles inside San Saba, with 5 mapped street and rail crossings. The San Saba River runs 3.47 channel miles in the city, and Mill Creek runs 1.26 miles; 5 street crossings of named streams are mapped. Creek banks and channels need their own depth and access plan, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Around San Saba, we have no mapped lakes or ponds within one mile of the route.

Do I need a permit for a San Saba bore near the Central Texas and Colorado River Railway?

On US 190 or another TxDOT right of way in San Saba, cover depth sets the bore profile: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. Along the right of way, the stated cover is 48 inches for electric and communication and 36 inches for water. The line owner files through TxDOT’s RULIS system, reviewed by the Brownwood District; we prepare the bore plan and profile for that filing. A Central Texas and Colorado River Railway crossing needs an agreement from the track owner. San Saba River work is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground near the City of San Saba system?

The City of San Saba public water system draws from groundwater wells and reports 1,360 service connections serving 3,151 people. The city also owns its municipal electric system, which reports 1,860 customers. Those systems make line location and exposure important before a new service or replacement bore near Brown Street, Commerce Street or Wallace Street. We confirm the line owner and route before planning a conduit crossing.

Line ownerWhat it isSourceSize
City of San SabaPublic water systemGroundwater wells1,360 connections, 3,151 people served
City of San Saba municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,860 customers reported
Oncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric CooperativeElectric utilities reporting service in San Saba CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put San Saba’s median housing year at 1970; 35 percent of homes were built before 1960, while 7 percent date to 2000 or later. That age mix can mean a replacement route has older buried lines to work around, unlike a new service. On San Saba bore paths, we hydrovac pothole every marked utility before drilling nearby. For example, a proposed crossing beneath Commerce Street needs the marked lines exposed first because surface marks show position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover San Saba and nearby Richland Springs?

We take directional boring work in San Saba County and nearby communities, including Richland Springs, 14.5 miles west. San Saba is the county seat, covers 2.71 square miles and sits at an elevation of 1,207 feet; its ZIP code is 76877. Lometa is 19.4 miles east, Goldthwaite is 19.5 miles northeast, and Lampasas, the nearest larger city, is 33.0 miles east. Our Yukon, Oklahoma yard is 370 road miles away, a 7.7 hour drive, so distance is part of mobilization planning for a Wallace Street or US 190 job.

Places near San Saba

Which jobs call for a bore along San Saba’s Wallace Street?

  • Highway crossing: A bore beneath US 190 keeps the existing pavement intact, with the route and cover set through the TxDOT process.
  • Water service: A connection near the City of San Saba system starts with locating existing water lines before choosing a path under Brown Street.
  • Fiber conduit: A route along Commerce Street can use a bore to pass beneath pavement while keeping marked utilities exposed and clear.
  • Creek crossing: A San Saba River crossing needs a planned depth and bank access, with waterway jurisdiction checked during planning.
  • Rail crossing: A line beneath the Central Texas and Colorado River Railway follows an agreement with the track owner for its crossing conditions.
  • Street replacement: A sewer or water replacement along Wallace Street can be bored to avoid opening the full street surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a San Saba job near Dry Street?

For a San Saba quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. A route near Dry Street also needs enough detail to identify pavement, existing lines and any stream or railway crossing before we settle the bore plan.

A short route with clear access and few crossings near Dry Street is simpler to plan than a bore with several obstacles. Length, pipe size, Nuvalde clay and any bedrock affect the tooling and time. Utility exposures, pavement, pits, backfill and excavator time also shape the scope. A crossing of US 190 or the Central Texas and Colorado River Railway adds planning conditions, while the 370 road miles from Yukon affect mobilization. Emergency or high profile work can add requirements to the plan.

Questions people ask about boring in San Saba

Does Trinity take directional boring work in San Saba County, and who staffs it?

Yes, we take directional boring work in San Saba County, with our own crews and vetted partner contractor satellite yards supporting the work. You deal with Trinity through the bore log, whichever crew is on site. For a route near the San Saba River, we plan the crossing around the channel and access.

Who controls Brown Street in San Saba, and can a bore avoid cutting it?

Brown Street is a city street because San Saba is incorporated. A bore can pass beneath the paved route rather than opening a trench through it, subject to the alignment and site conditions. We plan entry and exit pits off the travel surface where access allows, then expose marked lines before drilling near them.

Do older buried lines near Commerce Street affect San Saba replacement bores?

They can. The American Community Survey 2019 to 2023 estimates put the median housing year at 1970, and 35 percent of homes were built before 1960. A replacement bore near Commerce Street may need to work around older utilities, so marked lines on the route are pothole exposed before the drill approaches.

Are bore pits near the San Saba River affected by groundwater or flooding in San Saba?

Flood prone soils are mapped across 24 percent of San Saba, including areas to consider near the San Saba River. Seasonal water tables are not mapped, but the river crossing still needs a suitable pit location and depth plan. Water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Does Nuvalde soil in San Saba create a corrosion issue for steel pipe?

The USDA soil survey maps high steel corrosion risk across 91 percent of San Saba, so the line owner should consider casing and tracer wire materials for a Nuvalde soil route. For San Saba planning, we treat HDPE as unaffected by that soil corrosion concern. The selected pipe and any steel protection depend on the line owner’s design.

What kind of ground does a San Saba bore pass through in Nuvalde soil?

The USDA soil survey maps Nuvalde across 30 percent of San Saba, and at about 40 inches down, clay covers 26 percent while silty clay covers 25 percent. That clay can stick to the reamer and grip the pipe. Survey maps describe area patterns, so they do not replace checking conditions along a specific route.

How early should I call Texas811 for a San Saba bore near Wallace Street?

For a bore near Wallace Street, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days after the original notice, make a new request. In San Saba, we refresh worn or moved marks through Texas811 before continuing work.

Does San Saba’s distance from Yukon change a job near Lampasas?

From our Yukon, Oklahoma main office, we reach San Saba after 370 road miles and a 7.7 hour drive. Lampasas is 33.0 miles east of San Saba. The distance from Yukon affects mobilization planning for a San Saba job, while the bore route, soil and crossings determine the field scope.

What affects the price of a directional bore under US 190 in San Saba?

The price depends on the planned work, including length, pipe size, soil and rock, utility crossings, pavement, pits and backfill. A US 190 route may add right of way planning, and Nuvalde clay can affect reaming. Creek or railway crossings and mobilization from Yukon also change the work required.

Where the San Saba facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in San Saba

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in San Saba, Texas

Type the address of your job in San Saba. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for San Saba

All counties: Texas county list.