Shelbyville Texas Directional Boring: Hallsummit Soil, FM 417 And Clark Creek
Quick Answer: Hallsummit fine sandy loam is the leading mapped surface soil in Shelbyville, while clay loam farther down can hold a bore open and cling to the reamer. We take directional boring, also called horizontal directional drilling (HDD), for routes near FM 417 and Texas State Highway 87 without cutting the road surface. Shelbyville is 410 road miles from our Yukon, Oklahoma main office, with Blue Sky Lane among the local route details we check. The USDA survey maps a seasonal water table within 60 inches across 42 percent of the area, so pits and fluid returns need attention.
Shelbyville bores at a glance
- Unincorporated community in Shelby County, Texas. Population 100 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 410 miles, about 8.2 hours of driving.
- Ground: Hallsummit soil is mapped on 32 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 417 and Texas State Highway 87. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Clark Creek and Tenaha Creek.
- Public water: Shelbyville Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Clark Creek in Shelbyville?
Hallsummit soil is part of the ground our crews account for when we take directional boring work in Shelbyville, Shelby County, including routes near FM 417. The Census Bureau counted 100 residents in 2020; it does not publish yearly estimates for unincorporated places. Along Blue Sky Lane or the state highway corridors, we install water, sewer, gas, electric conduit and fiber without assuming every line follows the same route.
Our main office is in Yukon, Oklahoma, and Shelbyville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record is no utility strike in over 25 years, a priority around Shelbyville Water Supply Corporation lines near Clark Creek. The family business began in 1965 and has done directional boring since 1982.

What does the soil survey show about Shelbyville and Hallsummit soil?
The USDA soil survey maps Hallsummit fine sandy loam across 32 percent of Shelbyville, with Eastwood very fine sandy loam across 23 percent and Laneville loam across 16 percent. At about 40 inches below ground, clay loam accounts for 45 percent of mapped area and sandy clay loam for 40 percent; average clay content there is 30 percent. We use mapped Hallsummit, Eastwood, Laneville, and Dreka soil patterns as planning context, not as substitutes for test borings. Clayey layers can hold a bore open but cling to tooling, so crews adjust fluid and reaming to the ground.
| USDA soil survey, inside the Shelbyville mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Hallsummit 32 percent, Eastwood 23 percent, Laneville 16 percent, Dreka 11 percent and Bowie 6 percent |
| Texture at the surface | fine sandy loam 46 percent, loam 28 percent and very fine sandy loam 25 percent |
| Texture about 40 inches down | clay loam 45 percent, sandy clay loam 40 percent and loam 13 percent |
| Engineering class about 40 inches down | lean clay (CL) 97 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 42 percent of the area |
| Flood prone soils | 28 percent of the area |
| High corrosion risk for uncoated steel | 42 percent of the area |
The USDA survey does not map bedrock in Shelbyville’s top five feet, while the geologic map places the Wilcox Group, undivided, of Paleogene age below. Seasonal water table conditions are mapped within 60 inches across 42 percent of the area, and flood prone soils across 28 percent, so pits near Clark Creek need water and channel depth planning. High steel corrosion risk covers 42 percent. The line owner can weigh protective coatings and materials for steel casing and tracer wire.
How do crews handle Shelbyville ground with clay loam at depth?
For Shelbyville bores, we adapt the drilling plan to the clay loam mapped at about 40 inches and the Hallsummit surface soil. That helps control sticky returns and keeps the bore path suited to local conditions.
- Clay loam response: At about 40 inches, Shelbyville’s mapped clay loam can stick to the reamer, so we adjust drilling fluid and stage the reaming.
- Wet ground: With seasonal water table conditions mapped within 60 inches across 42 percent of the area, we plan manageable pits and pumping near Clark Creek.
- Creek route: Flood prone soils cover 28 percent of the mapped area, so a Clark Creek crossing needs depth planning that accounts for the channel and possible jurisdiction review.
- Utility exposure: Before drilling near a marked line along FM 417 or Blue Sky Lane, we use hydrovac potholing because locate paint does not show depth.

What is in the way of a new line near FM 417 in Shelbyville?
Shelbyville has FM 417 and Texas State Highway 87 inside the mapped community boundary, so a route under either state road needs a planned crossing rather than an open cut through pavement. Blue Sky Lane is the longest named street, with 0.2 miles mapped inside the community. Public records map 1.7 roadway miles of FM 417 and 1.1 miles of Texas State Highway 87 here. A route along or across those corridors changes the bore profile and the permit work.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 417 | State highway | 1.7 roadway miles inside | State highway office |
| Texas State Highway 87 | State highway | 1.1 roadway miles inside | State highway office |
| Clark Creek | Stream | 0.88 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Tenaha Creek | Stream | 0.44 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Prairie Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Morris Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Shelbyville or within one mile outside the community, so there is no mapped track crossing to plan around. Clark Creek runs 0.88 channel miles inside the boundary and Tenaha Creek 0.44 miles; public records show two mapped street crossings of named streams. A bore near either creek needs a route and depth plan that accounts for the channel. For underground planning in Shelbyville, we see no mapped lakes or ponds within one mile, while Clark Creek and Tenaha Creek remain stream considerations.
Who approves a bore in Shelbyville and Shelby County?
For work beneath FM 417 or Texas State Highway 87 in Shelbyville, TxDOT reviews the state highway permit through its Lufkin District. Shelbyville is an unincorporated community with no city government, so streets and permits belong to the county or state, depending on the road. The utility owner submits a right of way application through TxDOT’s RULIS system, using our bore plan and profile. TxDOT cover rules set the crossing depth: electric and communication lines and water lines need 60 inches, while pressurized sewer lines need 60 inches. A creek crossing near Clark Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near Shelbyville Water Supply Corporation?
Shelbyville Water Supply Corporation serves 1,149 people through 449 service connections, and its source is groundwater wells. For an electric conduit bore near Blue Sky Lane or FM 417, the line owner must be confirmed for the specific route. Southwestern Electric Power, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative report electric service in Shelby County, but that does not identify the provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Shelbyville Water Supply Corporation | Public water system | Groundwater wells | 449 connections, 1,149 people served |
| Southwestern Electric Power, Deep East Texas Electric Cooperative and Rusk County Electric Cooperative | Electric utilities reporting service in Shelby County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published reliably for a place as small as Shelbyville, so a proposed route near Clark Creek may involve an existing service or a new connection without a dependable local age profile. The community has 4.97 public road centerline miles, and the county averages 54.2 inches of precipitation a year, with December averaging 5.4 inches. Before drilling near Shelbyville Water Supply Corporation or an electric line, we use hydrovac potholing to expose marked utilities and confirm their depth.

How far is Shelbyville from Center and our Yukon yard?
Shelbyville is in Shelby County, 6.5 miles southeast of Center, the county seat and nearest larger city. The community sits at an elevation of 294 feet and covers 0.67 square miles. In Shelby County, we use ZIP codes 75973 and 75935 to distinguish Shelbyville work when planning underground routes. Other nearby places include Huxley, 12.1 miles east, Joaquin, 14.4 miles north, San Augustine, 16.0 miles south, and Tenaha, 16.1 miles northwest. Our Yukon, Oklahoma yard is 410 road miles away, an 8.2 hour drive, which affects how we plan mobilization for work near FM 417.
Places near Shelbyville
- Directional boring in Center: 6.5 miles west
- Directional boring in Huxley: 12.1 miles east
- Directional boring in Joaquin: 14.4 miles north
- Directional boring in San Augustine: 16 miles south
- Directional boring in Tenaha: 16.1 miles northwest
Which Shelbyville jobs call for a bore near Clark Creek?
- Highway crossing: A water, sewer or conduit route beneath FM 417 needs a bore profile that accounts for the state road and its pavement.
- Water service: A connection near Shelbyville Water Supply Corporation may need a route from a groundwater system line to a property along Blue Sky Lane.
- Creek crossing: A route beneath Clark Creek needs depth planning for the channel and a jurisdiction check during planning.
- Electric conduit: Along Texas State Highway 87, we confirm the electric line owner and expose marked utilities before drilling near them.
- Fiber drop: A fiber route near Blue Sky Lane can be bored to avoid cutting the street surface, with pits placed in dirt on each side.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Shelbyville job near Blue Sky Lane?
For a Shelbyville quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help show the route near Blue Sky Lane. Include any known crossings, such as FM 417 or Clark Creek, so we can review access and the proposed bore profile before pricing the work.
For work 410 road miles from Yukon main office, we set the price from each bore’s job details. Ground conditions matter: Hallsummit soil at the surface and clay loam at about 40 inches can affect drilling and reaming. Crossings matter too, especially FM 417, a creek, or existing utilities that need exposure. The pipe or conduit size, bore length, pavement, concrete, pits, excavator time and sand backfill also affect the scope. Shelbyville’s 410 road miles from Yukon can affect mobilization, as can emergency timing or a high profile route.
Questions people ask about boring in Shelbyville
Does Trinity Boring Solutions take jobs in Shelbyville and Shelby County?
Yes, we take directional boring work in Shelbyville, Shelby County, and staff it with our own crews or crews from partner drilling contractors we have vetted. From the first call through the bore log, we keep one point of contact for Shelby County work, whatever crew handles the bore. Routes near FM 417 are planned for their specific ground and crossings.
Does Hallsummit soil in Shelbyville pose a corrosion concern, and what pipe is used?
The soil survey maps high steel corrosion risk across 42 percent of Shelbyville, so the line owner should consider material and coating choices for steel casing or tracer wire. Hallsummit fine sandy loam is mapped across 32 percent of the community. HDPE is another pipe option, and the choice depends on the line requirements and route.
What ground will a bore pass through in Shelbyville near Hallsummit soil?
The USDA soil survey maps Hallsummit fine sandy loam across 32 percent of Shelbyville. At about 40 inches, clay loam covers 45 percent of mapped area and sandy clay loam 40 percent. Those are survey patterns, not site borings; the clay loam can hold a bore open while sticking to tooling, so the drilling plan must respond to actual returns.
Will a bore in Shelbyville hit rock in Hallsummit soil?
Bedrock is not mapped in Shelbyville’s top five feet, but that does not rule out deeper rock. The geologic map shows the Wilcox Group, undivided, of Paleogene age. A route near FM 417 still needs field observations as drilling advances, since the mapped information does not replace conditions encountered on the bore path.
Who approves a Shelbyville bore beneath FM 417?
TxDOT’s Lufkin District reviews the permit for work in the FM 417 right of way. The utility owner submits the application in TxDOT’s RULIS system, and we provide the bore plan and profile for that filing. The permit sets the required cover, so the planned depth under the highway must meet its conditions.
Can a line be bored under Clark Creek in Shelbyville?
A bore under Clark Creek can be planned, but the route and depth must account for the channel. The creek runs 0.88 channel miles inside the mapped community boundary, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Nearby flood prone soils also make pit placement and wet ground part of the plan.
Can I reach Trinity after hours for an urgent bore in Shelby County near Shelbyville?
Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent Shelby County job near Shelbyville, tell us the location, what line needs work and whether FM 417 or Clark Creek is part of the route. We provide 24 hour emergency response.
How early should I request 811 marks for a bore near Blue Sky Lane in Shelbyville?
For a bore near Blue Sky Lane, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Paint shows a line’s position, not its depth. If the start moves more than 14 days past the original notice, make a new request; worn or moved marks need refreshing through Texas811 before work continues.
What job details shape directional boring costs near FM 417 in Shelbyville?
The job scope determines the price, including bore length, pipe or conduit size, soil, crossings, pavement, pits and equipment time. Near FM 417, highway crossing requirements can shape the bore plan; a route near Clark Creek adds creek planning. Hallsummit soil and the 410 road miles from Yukon can also affect drilling and mobilization.
Where the Shelbyville facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Shelbyville
- U.S. Census Bureau, TIGER/Line 2024: Shelbyville boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Shelbyville population count
- Macrostrat geologic map compilation: map units under Shelbyville
- U.S. EPA Safe Drinking Water Information System: public water systems serving Shelbyville
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Shelby County
- U.S. Geological Survey, Elevation Point Query Service: Shelbyville elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Shelbyville
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Shelbyville
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Shelbyville, Texas
Type the address of your job in Shelbyville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Shelbyville
Same county: Timpson. All counties: Texas county list.
