trinityboringsolutions.com

Umbarger Texas Directional Boring: Pullman Clay Loam, US 60 and BNSF Railway

Quick Answer: Near US 60 and the BNSF Railway track, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Umbarger, Texas. The Yukon, Oklahoma main office is 283 road miles away, and Church Road is one local route that may shape access and setup. The USDA soil survey maps Pullman clay loam across 99 percent of the community, so sticky clay can cling to a reamer and grip pipe. On Church Road, staged reaming and having pipe ready helps limit the time an open hole sits.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Umbarger bores at a glance

  • Unincorporated community in Randall County, Texas. Population 123 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 283 miles, about 5.3 hours of driving.
  • Ground: Pullman soil is mapped on 99 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 60 and FM 168. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: BNSF Railway, with 2 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 60 in Umbarger?

For Umbarger jobs along US 60, we install water, sewer, gas, electric conduit and fiber where routes must pass beneath the highway, Church Road or other marked paths. Southwestern Public Service and Greenbelt Electric Cooperative report electric service in Randall County; the water provider for a particular address must be confirmed with the county or local water district before planning. The Census Bureau counted 123 people in Umbarger in the 2020 Census; it does not publish yearly estimates for this unincorporated place.

Our main office is in Yukon, Oklahoma, and Umbarger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982 while planning service around Umbarger ZIP codes 79091 and 79015. That work ranges from 3/4 inch service lines to 48 inch casing, including routes beneath US 60 or Church Road.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of Pullman soil does Umbarger have?

The USDA soil survey maps Pullman soil across 99 percent of Umbarger, mostly as Pullman clay loam with 0 to 1 percent slopes. Clay loam covers 100 percent of the mapped surface texture, and at about 40 inches down, clay loam is mapped across 99 percent of the area. The survey reports an average clay content of 39 percent at that depth, with no sandy area mapped there. These are mapped soil patterns, not test borings; the clay can stick to a reamer and grip pipe, so the bore plan needs to account for how the hole behaves.

USDA soil survey, inside the Umbarger mapped community boundaryWhat is mapped
Soil series mappedPullman 99 percent
Texture at the surfaceclay loam 100 percent
Texture about 40 inches downclay loam 99 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Bedrock is not mapped in the top five feet of the Umbarger area, though that does not rule out deeper rock. Seasonal water table conditions are mapped in 1 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE does not share that steel concern. The USDA map shows the Blackwater Draw Formation, a Cenozoic unit of sand, fine alluvium and silt, above mapped Paleocene Cenozoic sedimentary rocks. The clay loam remains the main shallow drilling consideration.

What does it take to bore Umbarger’s clay loam?

Pullman clay loam is the main mapped ground in Umbarger, and its clay can hold a hole open while building up on the reamer. Along Church Road or US 60, we plan the fluid and reaming sequence around that behavior.

  1. Pullman clay loam can stick to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages along Church Road.
  2. Because mapped Umbarger soils have an average clay content of 39 percent at about 40 inches, we watch fluid returns to avoid lifting pavement.
  3. With pipe ready before the final ream, we can pull it while the hole is fresh, reducing the time clay loam has to grip it.
  4. At US 60 or Adkisson Road, we hydrovac expose each marked utility before drilling near it, then track the head and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a line go under Church Road in Umbarger?

US 60 runs for 2.3 mapped roadway miles inside the Umbarger community boundary, and FM 168 adds 0.7 miles. Those routes set the highway crossing locations and may put a bore under TxDOT oversight. Church Road and Pondeseta Road each run 1.11 miles inside the community, while Adkisson Road runs 1.02 miles. These streets give a coordinator named route options to check against the planned line path. A bore can pass beneath pavement instead of cutting across it, subject to the applicable road approval and route plan.

CrossingTypeMapped extentWho has a say
US 60US highway2.3 roadway miles insideState highway office
FM 168State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad1.25 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 1.25 track miles inside Umbarger, on the BNSF Railway Hereford Subdivision, and 2 mapped street and rail crossings occur in the community. A line beneath the track needs an agreement with BNSF Railway; its conditions guide the crossing design. No named streams are mapped inside the community, no street crossings of named streams are mapped, and no lakes or ponds are mapped within 1 mile. That leaves roads and the railway as the mapped crossing features to focus on.

Who approves a bore in Randall County near Umbarger?

For Umbarger work beneath US 60 or FM 168, TxDOT Amarillo District reviews the utility permit because these routes are state and US highways. Umbarger is an unincorporated community with no city government, so work on its streets belongs to the county or state rather than a city department. The utility owner, not the drilling contractor, submits the TxDOT application through RULIS; we prepare the bore plan and profile for that filing and work under the permit issued to the owner. An electric or communication line crossing a highway needs at least 60 inches of cover below the lowest point of the crossed grade; water needs the same crossing cover, and pressurized sewer lines also need 60 inches. The permit may set a different depth. A BNSF Railway crossing needs the railroad’s agreement, and no mapped stream crossing is identified in Umbarger.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Randall County near Umbarger?

The water provider for a specific Umbarger address must be confirmed with the county or local water district before a bore is planned; available EPA drinking water records do not tie a system to this community. Southwestern Public Service and Greenbelt Electric Cooperative report electric service in Randall County, but neither should be assumed to serve every address. Before a conduit bore near US 60 or Church Road, confirm the line owner and its conduit requirements for the route.

Line ownerWhat it isSourceSize
Southwestern Public Service and Greenbelt Electric CooperativeElectric utilities reporting service in Randall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing counts are not published reliably for a place as small as Umbarger, so a coordinator cannot use a local age profile to judge what may be underground along Adkisson Road. Service lines may run beside the named roads, and local precipitation averages 19.3 inches a year, with June averaging 2.9 inches and February 0.5 inches. Before drilling near a marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Umbarger from Canyon and our Yukon yard?

Umbarger is in Randall County, 11.0 miles west of Canyon, the county seat and nearest larger city. The community covers 1.03 square miles and sits at an elevation of 3,766 feet. Umbarger’s ZIP codes are 79091 and 79015, details that help identify the area for underground crossing plans. Rockwell Place is 12.8 miles northeast, Bushland is 17.3 miles north, Timbercreek Canyon is 17.8 miles east, and Wildorado is 18.4 miles north. The drive from our Yukon, Oklahoma yard is 283 road miles and 5.3 hours, which is a mobilization consideration for work near US 60.

Places near Umbarger

What kinds of bores fit Pondeseta Road and Umbarger?

  • Highway crossing: A US 60 bore needs a route plan that meets TxDOT review and the required cover for the line being installed.
  • Water service: A service route near Church Road needs the address specific water provider confirmed before the bore is planned.
  • Fiber conduit: A fiber route along Pondeseta Road can pass beneath pavement, with marked utilities exposed before the drill approaches.
  • Rail crossing: A line beneath BNSF Railway needs the railroad agreement to set the crossing details for its 1.25 track miles in Umbarger.
  • Street crossing: A bore beneath Adkisson Road avoids an open cut across the street, subject to the responsible road authority’s approval.
  • Electric conduit: Near FM 168, confirm the electric line owner before planning conduit, since county reporting does not identify every address served.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near BNSF Railway in Umbarger?

To price a bore near US 60 or Church Road, send the address or map pin, what goes underground, pipe or conduit size and footage; a sketch or plans help. For a BNSF Railway approach, show the crossing limits and equipment access on the plan. That gives us the route details needed to review a Pullman clay loam bore and the nearby constraints.

The Pullman clay loam can affect reaming and fluid needs, while the number of marked utilities to expose changes the work along Church Road. Concrete or pavement, pits, excavator time and backfill also shape the scope. A US 60 crossing brings TxDOT permit and cover requirements into the plan, and a BNSF Railway route needs its own crossing agreement. Mobilization matters too: Umbarger is 283 road miles from the Yukon yard. We build the quote around those route and ground details, not footage alone.

Questions people ask about boring in Umbarger

Does Trinity take directional boring work in Umbarger, Randall County, and how are crews assigned?

Yes, we take directional boring work in Umbarger, Randall County, and keep the job coordinated through the bore log. Our own crews and partner contractor crews vetted by Trinity may handle the field work. For a route near US 60, one point of contact keeps the plans, crossing details and field notes connected.

What ground should I expect for an Umbarger bore through Pullman soil?

The USDA soil survey maps Pullman clay loam across 99 percent of Umbarger, including clay loam at about 40 inches down across 99 percent of the area. The average clay content there is 39 percent. This mapped pattern is not a test boring, but it signals sticky ground that can build on a reamer and grip pipe.

Will a bore in Umbarger hit rock?

Bedrock is not mapped in the top five feet of Umbarger, but deeper rock is not ruled out. The mapped Blackwater Draw Formation is Cenozoic sand, fine alluvium and silt; the map also shows Paleocene Cenozoic sedimentary rocks. A site specific route check still matters near US 60 because a map unit does not confirm conditions at a bore location.

Who approves an Umbarger bore under US 60, and which TxDOT office reviews it?

TxDOT Amarillo District reviews utility work in US 60 right of way near Umbarger. The utility owner submits the permit application in RULIS, while we supply the bore plan and profile for that filing. Cover depends on the line: electric and communication crossings need at least 60 inches, and the permit can set a different depth.

What does an Umbarger bore under BNSF Railway require?

A crossing beneath BNSF Railway in Umbarger needs an agreement from the railroad that owns the track. For Umbarger, our agreement sets crossing conditions for casing, depth and flagging requirements. The mapped track is part of the BNSF Railway Hereford Subdivision, so the route plan must address the railroad crossing before crews can proceed.

Who owns electric lines in Umbarger, Randall County, and who confirms conduit specs?

Southwestern Public Service and Greenbelt Electric Cooperative report electric service in Randall County, but that does not establish which one serves a particular Umbarger address. Confirm the specific line owner and conduit requirements before planning a bore near FM 168 or Church Road. The line owner’s information guides the conduit design.

Can I reach Trinity after hours about an urgent bore near Adkisson Road in Umbarger?

Yes, Trinity’s phone is answered 24 hours a day for urgent work near Adkisson Road or elsewhere in Umbarger. Call (405) 409-7423 and give the location, what needs to go underground and any immediate crossing concern. That information helps us understand the request before planning next steps.

How much notice does Texas811 need for a bore near Church Road in Umbarger?

For a bore near Church Road, submit a locate request through Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 60 in Umbarger?

The job scope sets the price for a US 60 bore in Umbarger. Length, pipe or conduit size, Pullman clay loam, utilities to expose, pavement, pits and backfill all affect the work. TxDOT requirements may shape the highway route, while distance from the Yukon yard affects mobilization. A BNSF Railway crossing adds separate crossing coordination.

Where the Umbarger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Umbarger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Umbarger, Texas

Type the address of your job in Umbarger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Umbarger

Same county: Amarillo · Lake Tanglewood · Palisades · Happy. All counties: Texas county list.