trinityboringsolutions.com

Wingate Texas Directional Boring: Quanah Clay Loam, Texas State Highway 153, Valley Creek

Quick Answer: Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Wingate for routes near Texas State Highway 153 and Valley Creek. The Yukon, Oklahoma main office is 332 road miles from Wingate, where Valley Creek crossings can shape the bore route. Quanah clay loam is common here. Sticky clay can cling to the reamer, so we plan staged passes and keep the pull moving.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wingate bores at a glance

  • Unincorporated community in Runnels County, Texas. Population 83 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 332 miles, about 6.6 hours of driving.
  • Ground: Quanah soil is mapped on 34 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 153, FM 2595 and FM 383. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Valley Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Wingate near Texas State Highway 153?

Trinity Boring Solutions takes directional boring work in Wingate, where Quanah clay loam can make a reamer sticky. Wingate is in Runnels County, and the Census Bureau counted 83 residents in 2020. We install water, sewer, gas, electric conduit and fiber lines along routes near Texas State Highway 153, FM 2595, FM 383 and Wingate streets, with the route shaped around marked utilities and access.

Our main office is in Yukon, Oklahoma, and Wingate work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have drilled directionally since 1982, bringing four decades of experience to the clay loam and gravelly ground mapped around Valley Creek. For crossings near 1st Street, we stay involved from the first call through the bore log, regardless of crew.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Quanah soil affect a Wingate bore?

Quanah soil is the leading mapped series in Wingate, covering 34 percent of the community. The USDA soil survey maps Quanah clay loam on gentle slopes across 33 percent of the area. Clay loam makes up 68 percent of the surface texture and 67 percent of the mapped texture at about 40 inches below the surface. The average clay content at that depth is 30 percent, while heavy clay is mapped across 12 percent. Clay holds an open hole, but it can ball up on the reamer or grip pipe as it swells. Quanah and Mereta map patterns help frame our planning, but they are soil patterns, not test borings.

USDA soil survey, inside the Wingate mapped community boundaryWhat is mapped
Soil series mappedQuanah 34 percent, Mereta 23 percent, Bukreek 16 percent, Spur 13 percent and Sagerton 6 percent
Texture at the surfaceclay loam 68 percent, loam 29 percent and silt loam 3 percent
Texture about 40 inches downclay loam 67 percent, loam 15 percent and sandy clay loam 12 percent
Engineering class about 40 inches downlean clay (CL) 98 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils15 percent of the area
High corrosion risk for uncoated steel11 percent of the area

The USDA soil survey maps no bedrock within 60 inches, but that does not rule out deeper rock. A seasonal water table is not mapped within 60 inches; flood prone soils cover 15 percent of Wingate, including ground near Valley Creek. That creekside ground calls for a route and depth planned beneath the channel, with Corps jurisdiction checked during planning. High steel corrosion risk covers 11 percent, so the line owner should consider casing and tracer wire materials. The geologic map shows Pleistocene alluvial gravel and sand above mapped Early Permian sedimentary rock. Gravel can deflect a drill head, so depth and pitch need close checks.

What does it take to bore Wingate clay loam?

In Wingate, Quanah clay loam calls for controlled fluid and staged reaming. We track the head from the surface and log its depth and pitch, especially where the mapped gravel and sand could push it off line.

  1. Clay control: Quanah clay loam can cling to a reamer, so we use controlled fluid, open the hole in stages and plan the pipe pull without delay.
  2. Gravel tracking: Pleistocene alluvial gravel and sand are mapped in Wingate, so we check the drill head’s depth and pitch as each rod advances.
  3. Creek route: Flood prone soils cover 15 percent of Wingate, so a Valley Creek crossing needs a planned path beneath the channel and a jurisdiction check.
  4. Utility exposure: Before a bore near 1st Street, we hydrovac marked lines along the route because surface paint shows location, not burial depth.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What is in the way of a new Wingate line near Texas State Highway 153?

Texas State Highway 153 runs 1.7 mapped roadway miles inside the Wingate community boundary; FM 2595 and FM 383 each run 0.6 miles. A route along 1st Street, the longest named street at 0.6 miles, may also need to account for 2nd Street and 4th Street, each mapped at 0.31 miles. Boring can pass beneath pavement and driveways without cutting them. For an existing state highway, the permitted bore depth and its extension beneath travel lanes shape the crossing plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 153State highway1.7 roadway miles insideState highway office
FM 2595State highway0.6 roadway miles insideState highway office
FM 383State highway0.6 roadway miles insideState highway office
Valley CreekStream1.94 channel miles insideChecked for Corps of Engineers jurisdiction
Fish CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Wingate or within 1 mile outside its boundary, and no street and rail crossing is mapped in the community. Valley Creek runs 1.94 channel miles inside Wingate, with 2 mapped street crossings of named streams. A creek crossing needs a route planned beneath the channel, and Corps jurisdiction is checked during planning. For a Valley Creek crossing, we check mapped water features and find no lakes or ponds within 1 mile.

Who has to sign off on Wingate work in Runnels County?

Wingate is an unincorporated community, so it has no city government; its streets fall to the county, while Texas State Highway 153, FM 2595 and FM 383 are state roads. Work in their right of way needs a TxDOT utility permit reviewed by the San Angelo District. Electric and communication crossings call for 60 inches of cover below the lowest crossed grade, and water crossings call for 60 inches; the district may set another depth. The utility owner files through RULIS, and we prepare the bore plan and profile for its application. A Valley Creek crossing is checked for Corps jurisdiction. No railroad is mapped in or near Wingate.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Wingate in Runnels County?

The water provider for a specific Wingate address must be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie systems to towns, so the provider for this address could not be matched. AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Runnels County; that does not identify the line owner at every Wingate address. We confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Runnels CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wingate’s median housing year at 1944, with all housing units built before 1960 and none built in 1960 or later. Older homes can mean a replacement route near 1st Street must account for existing service lines, while a new service still needs its own path. We hydrovac expose marked utilities on the bore route before drilling near them; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Wingate from Blackwell and our Yukon office?

Wingate is in Runnels County, at an elevation of 2,010 feet and with 2.18 square miles of mapped land. ZIP code 79566 serves the community. Winters lies 10.8 miles southeast; Blackwell is 12.9 miles west; and Bronte is 15.7 miles southwest. Ballinger, the county seat, is 22.9 miles south, while Sweetwater is 34.3 miles northwest. The Yukon, Oklahoma main office is 332 road miles away, a 6.6 hour drive, which can affect mobilization for a bore near Texas State Highway 153.

Places near Wingate

Which jobs call for a bore near Valley Creek in Wingate?

  • Highway crossing: A bore beneath Texas State Highway 153 follows TxDOT cover and right of way requirements, with the utility owner applying for the permit.
  • Water service: A route near 4th Street can carry a water line beneath pavement without cutting the street, after the address provider is confirmed.
  • Fiber conduit: A fiber route along 1st Street needs marked utilities exposed before drilling near them, especially around older housing and service lines.
  • Creek crossing: A Valley Creek bore is planned beneath the channel, with Corps jurisdiction checked during planning.
  • Electric conduit: Near FM 2595, we confirm the electric line owner before planning conduit and route the bore around marked utilities.
  • Sewer line: A sewer bore near 3rd Street can use pits in the dirt on each side rather than an open cut through pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Wingate bore near 1st Street?

For a Wingate quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A route near 1st Street also needs enough detail to show nearby services, access and any pavement or creek crossing. That lets us judge the bore path rather than estimate from the street name alone.

For work along Chadbourne Street, we price the job from its specific scope and crossing details. Ground is one factor: Quanah clay loam may need staged reaming, while mapped gravel can affect steering. Crossings matter too, including Texas State Highway 153, Valley Creek, marked utilities and any pavement. Logistics include pit access, excavator time, backfill and mobilization; Wingate is 332 road miles from Yukon. Bore length, pipe size and emergency timing also change the work involved.

Questions people ask about boring in Wingate

Does Trinity Boring Solutions take jobs in Wingate and Runnels County, and who staffs them?

Yes. We take directional boring work in Wingate, Runnels County, with our own crews and vetted partner contractor crews available for the work. Trinity remains your contact from the first call through the bore log, whichever crew is on site. The route still depends on the address, such as a path near Texas State Highway 153.

Will a Wingate bore hit rock below Quanah soil?

Rock at greater depth is possible, but bedrock is not mapped in the top five feet of Wingate. The geologic map shows Pleistocene alluvial gravel and sand and Early Permian sedimentary rock. Gravel can push a drill head off line, so we track depth and pitch closely on a route near Valley Creek.

Who approves a Wingate bore under Texas State Highway 153?

The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT San Angelo District reviews it. We prepare the bore plan and profile for the owner’s application. A Texas State Highway 153 crossing also has cover requirements that depend on the line type and may be adjusted by the district.

Can a Wingate line be bored under Valley Creek?

A bore can be planned beneath Valley Creek, which runs 1.94 channel miles inside Wingate. Flood prone soils cover 15 percent of the community, so the route and depth need to account for the channel. For a Fish Creek crossing, we check Corps jurisdiction during planning as part of crossing assessment, while approval remains subject to review.

Which electric company owns a Wingate line in Runnels County, and who confirms conduit specs?

AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative report service in Runnels County, but that does not identify the owner at a specific Wingate address. We confirm the line owner before planning a conduit bore, and the owner confirms the line requirements. That check matters for a route near FM 383 as much as elsewhere.

Who controls Wingate streets such as 4th Street, and does a bore require cutting them?

Wingate is an unincorporated community with no city government, so 4th Street is not a city street; county or state authority depends on the road. A directional bore can pass beneath pavement without cutting it. For state highway right of way, including Texas State Highway 153, the utility owner needs the TxDOT permit.

What bore sizes and lengths can Trinity handle for a Wingate job near 3rd Street?

On Texas State Highway 153 crossings, we handle lines from 3/4 inch service lines up to 48 inch casing and bores from 10 feet to 5,000 feet. A route near 3rd Street still needs a site specific plan based on the ground, access, pipe size and utility crossings. Quanah clay loam and mapped gravel can affect the drilling approach.

How early should I call Texas811 for a Wingate bore near 1st Street, and what if marks move?

For a bore near 1st Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. When a crossing near FM 2595 slips more than 14 days beyond its original notice, we submit a new request. Before work resumes near 3rd Street, we refresh any worn or moved marks through Texas811.

What affects the price of a Wingate directional bore under Texas State Highway 153?

The route and scope set the price, not one factor alone. Length, pipe size, Quanah clay loam, mapped gravel, utility exposures, pavement, pits and access all matter. A Texas State Highway 153 crossing adds permit planning, and mobilization reflects Wingate’s 332 road miles from Yukon. Emergency timing can also change the required work.

Where the Wingate facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wingate

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wingate, Texas

Type the address of your job in Wingate. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wingate

Same county: Ballinger · Miles · Rowena. All counties: Texas county list.