Sweetwater Texas Directional Boring: Woodward Loam, Union Pacific Tracks and Town Creek
Quick Answer: Union Pacific and BNSF tracks cross Sweetwater, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines that need to pass them. Sweetwater is 319 road miles from our Yukon, Oklahoma main office, with Interstate 20 and US 84 shaping routes through town. Woodward soil covers 48 percent of the city, and mapped bedrock is typically about 29 inches down, so ground conditions matter to bore planning. At Town Creek, a crossing needs a route planned beneath the channel.
Sweetwater bores at a glance
- County seat of Nolan County, Texas. Population 10,196 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 319 miles, about 6.4 hours of driving.
- Ground: Woodward soil is mapped on 48 percent of the area, with very fine sandy loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 62 percent of the area.
- Highways inside the boundary: Interstate 20, Interstate 20 Business, US 84, Texas State Highway 70 and Texas State Highway 70 Business. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: Union Pacific and BNSF Railway, with 24 mapped street and rail crossings.
- Named streams inside the boundary: Town Creek, Wolf Hollow, Kildoogan Creek and Sweetwater Creek.
- Public water: City of Sweetwater, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Town Creek in Sweetwater?
Trinity Boring Solutions takes directional boring work in Sweetwater, Nolan County, where Town Creek and Interstate 20 can shape utility routes. Sweetwater’s Census Bureau Vintage 2024 population estimate is 10,196, a figure we consider when planning underground boring work. We install water, sewer, gas, electric conduit and fiber for routes along streets such as Lamar Street or crossings near Town Creek, based on the job plan.
Our main office is in Yukon, Oklahoma, and Sweetwater work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma, which shows our reach. A Sweetwater job near Town Creek is more likely to involve a route sized to its specific line and crossing.

How does Woodward soil affect a bore in Sweetwater?
The USDA soil survey maps Woodward soil across 48 percent of Sweetwater and Paducah across 22 percent. Loam makes up 97 percent of mapped surface texture. At about 40 inches below the surface, very fine sandy loam covers 49 percent of the mapped area, while sandy clay loam covers 21 percent. The survey also maps USCS CL soil across 84 percent at that depth and average clay content of 18 percent. These are mapped soil patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Sweetwater city limits | What is mapped |
|---|---|
| Soil series mapped | Woodward 48 percent, Paducah 22 percent, Quinlan 10 percent, Colorado 6 percent and Veal 4 percent |
| Texture at the surface | loam 97 percent |
| Texture about 40 inches down | very fine sandy loam 49 percent, sandy clay loam 21 percent and bedrock 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 84 percent |
| Average clay content about 40 inches down | 18 percent |
| Bedrock mapped within 60 inches | 62 percent of the area (2 percent hard rock, 60 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 1 percent of the area |
Bedrock is mapped within 60 inches across 62 percent of Sweetwater, mostly weathered bedrock, with hard bedrock mapped across 2 percent. Typical bedrock depth is 29 inches, so some routes may slow as the drill moves from soil into rock. The USDA soil survey maps no seasonal water table within 60 inches, but flood prone soils cover 6 percent. With high steel corrosion risk mapped across 1 percent of Sweetwater, we account for that condition when planning underground work. The Whitehorse Group, undivided, of Guadalupian age includes sandstone, sand, shale, gypsum, selenite and dolomite, so a route can meet changing materials.
How is a bore run through very fine sandy loam in Sweetwater?
In Sweetwater, the mapped very fine sandy loam and shallow weathered bedrock call for a route planned to the actual ground, not just a line on a map. We locate, expose, drill and log the bore.
- At Town Creek, we plan the bore below the channel and account for the 6 percent of Sweetwater mapped as flood prone soil; the crossing is checked for Corps jurisdiction.
- Where Woodward soil and USCS CL ground are mapped, we watch how the material cuts and carries around the reamer, then adjust the drilling approach to field conditions.
- Before drilling near a marked line along Lamar Street, we hydrovac expose it; paint marks position, not depth, and each exposed utility is checked against the bore path.
- As a route approaches Sweetwater’s shallow mapped bedrock, we track the drill head from the surface and log depth and pitch so the transition does not pull the bore off line.

What is in the way of a new line in Sweetwater near Union Pacific?
Interstate 20 and US 84 each have 11.2 mapped roadway miles in Sweetwater, so a route may need to pass beneath highway pavement. Texas State Highway 70 and FM 1544 also run through the city. Broadway Street is the longest named street at 5.2 miles, followed by 12th Street at 2.37 miles and Lamar Street at 2.22 miles. A bore can keep those road surfaces intact, but the route, access and required highway approval still need to be planned.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 11.2 roadway miles inside | State highway office |
| Interstate 20 Business | Interstate | 6.9 roadway miles inside | State highway office |
| US 84 | US highway | 11.2 roadway miles inside | State highway office |
| Texas State Highway 70 | State highway | 6.1 roadway miles inside | State highway office |
| Texas State Highway 70 Business | State highway | 3.9 roadway miles inside | State highway office |
| FM 1544 | State highway | 1.4 roadway miles inside | State highway office |
| FM 419 | State highway | 1.1 roadway miles inside | State highway office |
| Loop 170 | State highway | 0.7 roadway miles inside | State highway office |
| Union Pacific | Railroad | 9.03 track miles inside | The railroad |
| BNSF Railway | Railroad | 8.81 track miles inside | The railroad |
| Town Creek | Stream | 2.27 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wolf Hollow | Stream | 1.34 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Kildoogan Creek | Stream | 0.9 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Sweetwater Creek | Stream | 0.13 channel miles inside | Checked for Corps of Engineers jurisdiction |
Sweetwater has 9.03 track miles owned by Union Pacific and 8.81 owned by BNSF Railway, with 24 mapped street and rail crossings in the city. Any crossing needs an agreement from the railroad that owns that track. Town Creek runs 2.27 channel miles, and mapped street crossings of named streams total 17. Wolf Hollow, Kildoogan Creek and Sweetwater Creek are also mapped in town; Santa Fe Lake covers 107 acres. Creek and lake routes need planning for the channel and possible Corps jurisdiction.
Who approves a bore on Sweetwater streets and in Nolan County?
Sweetwater is an incorporated city, so its city streets belong to the city; a bore under Lamar Street can avoid an open cut but still needs the applicable crossing approvals. For Interstate 20, US 84, Texas State Highway 70 or FM 1544 right of way, the line owner, not the driller, files the utility permit through TxDOT RULIS, and the TxDOT Abilene District reviews it. We prepare the bore plan and profile for the owner’s application. TxDOT cover rules set 60 inches for electric or communication crossings and 48 inches alongside the right of way; water lines need 60 inches at crossings and 36 inches alongside, while pressurized sewer crossings need 60 inches. Where TxDOT requires boring or tunneling beneath existing highway pavement in Sweetwater, we plan the crossing to meet that requirement. A Union Pacific or BNSF crossing needs the owning railroad’s agreement, and Town Creek planning includes checking for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Sweetwater system?
The City of Sweetwater public water system uses surface water and reports 5,069 service connections serving 12,401 people. Those lines matter when planning a route near Alabama Avenue or another service connection. Electric utilities reporting service in Nolan County are AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative. We confirm the line owner and conduit specifications for the specific address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Sweetwater | Public water system | Surface water | 5,069 connections, 12,401 people served |
| AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative | Electric utilities reporting service in Nolan County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sweetwater’s median housing year at 1961; 48 percent of homes were built before 1960, and 4 percent in 2000 or later. That mix means a replacement bore along 12th Street may need to connect to older buried lines, while a new service follows a different route. We hydrovac expose marked utilities on the bore path before drilling near them, since paint along Lamar Street shows position, not depth.

Where does Trinity work around Sweetwater and Roscoe?
Sweetwater is the Nolan County seat, at an elevation of 2,172 feet, and covers 11.07 square miles. ZIP code 79556 serves Sweetwater, and we use that location detail to scope underground boring requests. Roscoe is 7.5 miles west; Trent is 16.7 miles east; Loraine is 18.2 miles west; Roby is 19.2 miles north; and Sylvester is 19.8 miles northeast. Abilene, the nearest larger city, is 39.1 miles east. Our Yukon yard is 319 road miles away, a 6.4 hour drive, so distance is part of planning work around Interstate 20 and rural routes beyond Sweetwater.
Places near Sweetwater
- Directional boring in Roscoe: 7.5 miles west
- Directional boring in Trent: 16.7 miles east
- Directional boring in Loraine: 18.2 miles west
- Directional boring in Roby: 19.2 miles north
- Directional boring in Sylvester: 19.8 miles northeast
- Directional boring in Abilene: 39.1 miles east
Which jobs call for a bore along 12th Street in Sweetwater?
- Highway crossing: A line beneath Interstate 20 needs a bore plan that keeps existing pavement intact and fits the TxDOT right of way permit.
- Water service: A connection near the City of Sweetwater system needs a route checked against existing surface water supply lines and other marked utilities.
- Fiber route: A fiber bore along Broadway Street can pass beneath pavement, with the route set around lines exposed before drilling.
- Creek crossing: A Town Creek bore needs a route beneath the channel and planning that accounts for mapped flood prone soils.
- Rail crossing: A line beneath Union Pacific track needs the railroad’s crossing agreement and a route coordinated with its requirements.
- Street replacement: A replacement line near 12th Street can be bored to avoid cutting the street while tying into existing service lines.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Alabama Avenue in Sweetwater?
For a Sweetwater quote, start with the address or map pin, such as a location along Alabama Avenue. In ZIP code 79556, tell us what will go in the ground, plus pipe or conduit size and footage, so we can plan the bore. A sketch or plans help show whether the route reaches Interstate 20, a creek, a track or a service connection near 12th Street.
Ground is a major price factor in Sweetwater: Woodward soil is widespread, and mapped bedrock is often shallow, which can change drilling time and tooling. Next, the number of utilities to expose and crossings such as Union Pacific track, Interstate 20 or Town Creek affect the plan. Length and line size matter too, along with pavement, pits, excavator time and sand backfill. With Yukon 319 road miles away, we account for that distance when planning mobilization for underground work in Sweetwater. High profile or emergency work can add planning and equipment demands.
Questions people ask about boring in Sweetwater
Does Trinity Boring Solutions take directional boring jobs in Nolan County near Sweetwater?
Yes, we take directional boring work in Sweetwater and across Texas. Our main office is in Yukon, and work near Town Creek is staffed with our own crews or from satellite yards run by partner drilling contractors we have vetted. You deal with Trinity through the job, whichever crew is on site.
Who owns electric lines in Nolan County near Sweetwater, and who confirms conduit specs?
Utilities reporting electric service in Nolan County include AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative. Those reports do not identify the provider at every Interstate 20 address. We confirm the line owner and conduit specifications for the specific route before planning a bore.
Does Sweetwater control Lamar Street, and can a utility bore avoid cutting it?
Sweetwater is incorporated, so Lamar Street is a city street. Directional boring can pass a utility beneath the street without opening a trench through the roadway. The route still needs to account for marked utilities and the work area at each end of the bore.
How old are buried lines near 12th Street in Sweetwater, and can replacement lines be bored?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1961, with 48 percent of homes built before 1960. Older areas near 12th Street may have existing lines that need careful locating before replacement. A bore can install a new line without trenching the full street.
What ground should I expect for a Sweetwater bore through Woodward soil?
The USDA soil survey maps Woodward soil across 48 percent of Sweetwater. At about 40 inches down, very fine sandy loam covers 49 percent of the mapped area, and USCS CL soil covers 84 percent. Those are mapped patterns, not test borings, so the actual route and drilling response need field checks.
Is there rock under Sweetwater, and how much bedrock is mapped within five feet?
Yes, bedrock is mapped within five feet across 62 percent of Sweetwater, and typical depth is 29 inches. Most of the mapped bedrock is weathered, while hard bedrock is mapped across 2 percent. A bore may slow at the soil to rock transition, so the route needs to allow for changing ground.
Does Trinity cover Roscoe and rural sites outside Sweetwater?
We take work in Texas beyond Sweetwater city limits, including routes near Roscoe, 7.5 miles west. The address and access determine mobilization and the right crew plan. Send the route details for rural work so we can account for its distance from our Yukon main office.
How early should I request a Sweetwater bore locate for Broadway Street?
For a Broadway Street start, request the Texas811 locate at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as at least two working days. The notice cannot be made more than 14 days early. If the start slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore near Interstate 20 in Sweetwater?
The route and ground drive the scope: Woodward soil and shallow mapped bedrock can affect drilling time, while an Interstate 20 crossing adds permit and pavement requirements. Line length and size, utilities to expose, pavement, creek or track crossings, pits and equipment time also matter. Mobilization reflects Sweetwater’s 319 road miles from Yukon. We price the specific job, not a standard local rate.
Where the Sweetwater facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sweetwater
- U.S. Census Bureau, TIGER/Line 2024: Sweetwater boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Sweetwater
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sweetwater housing units and year built
- Macrostrat geologic map compilation: map units under Sweetwater
- U.S. EPA Safe Drinking Water Information System: public water systems serving Sweetwater
- U.S. Department of Transportation, North American Rail Network: track owners in Nolan County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Nolan County
- U.S. Geological Survey, Elevation Point Query Service: Sweetwater elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sweetwater
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sweetwater
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sweetwater, Texas
Type the address of your job in Sweetwater. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sweetwater
Same county: Blackwell. All counties: Texas county list.
