Free Bore Planner
Plan Your Bore in Blaine County, Oklahoma
Type the address of your job in Blaine County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What the USDA Soil Survey Shows in Blaine County
The federal soil survey maps the ground across Blaine County. These figures come from that data and show what a drill crew is likely to meet before the first pothole is dug.
- Most common soils: Lovedale (8%), Nobscot (6%) and Norge (5%) by share of county area.
- Surface texture: most often fine sandy loam (22%) or silt loam (16%).
- Bedrock within 5 feet: recorded on about 31% of the county. Most of it is soft, weathered rock rather than hard rock.
- Clay rich subsoil: about 23% of the county has a layer with 35% clay or more in the top 5 feet.
- Sandy layers: about 24% of the county has a layer with 70% sand or more in the top 5 feet.
What that means for a bore: Rock within reach of a typical utility bore is common here, so depth is confirmed by potholing and rock tooling goes on the truck when the path calls for it. Loose sand can cave into an open hole, so the fluid mix is built to hold the bore until the pipe is pulled.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database for Blaine County, Oklahoma (survey area OK011, version 23, August 28, 2026), available through Web Soil Survey. Percentages are shares of mapped county area. The survey shows the general pattern. Utility locates and potholing confirm the ground on your bore path.