Alfred Texas Directional Boring: Opelika Soil, Tecolote Creek and Texas State Highway 359
Quick Answer: Need a line beneath Texas State Highway 359 without opening the pavement? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Alfred for highway and creek crossings. Alfred is 582 road miles from our Yukon, Oklahoma main office, with Tecolote Creek running through the community. Opelika fine sandy loam covers much of the mapped area, while sandy clay loam is common at depth. That clay can grip a pipe, so the reaming and pullback need to be planned together.
Alfred bores at a glance
- Unincorporated community in Jim Wells County, Texas. Population 82 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 582 miles, about 11.5 hours of driving.
- Ground: Opelika soil is mapped on 59 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 359. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Tecolote Creek, Palo Hueco Creek and Ruces Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring under Texas State Highway 359 in Alfred?
Can we put a line beneath Texas State Highway 359 without cutting the road? Trinity Boring Solutions takes directional boring work in Alfred, an unincorporated community in Jim Wells County. The 2020 Census counted 82 people here; the Census Bureau does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber, including routes beneath Jefferson Street or toward a service along Texas State Highway 359.
Our main office is in Yukon, Oklahoma, and Alfred work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A service line along Houston Street might be 3/4 inch, while the largest work we take can use 48 inch casing. Our family business started in 1965, and we have done directional boring since 1982, including work sized for Alfred’s local streets and highway.

What is Opelika soil like to bore through in Alfred?
The USDA soil survey maps Opelika soil across 59 percent of Alfred, including Opelika fine sandy loam across 35 percent and a depressional, ponded map unit across 24 percent. At the surface, fine sandy loam covers 78 percent of the mapped area. About 40 inches down, sandy clay loam is mapped across 88 percent, and the soil classification is CL across 80 percent. The survey reports average clay content of 29 percent at that depth. These are mapped patterns, not test borings, so a route near Tecolote Creek still needs a site specific plan.
| USDA soil survey, inside the Alfred mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Opelika 59 percent, Runge 14 percent, Goliad 5 percent, Papagua 5 percent and Parrita 5 percent |
| Texture at the surface | fine sandy loam 78 percent, sandy clay loam 15 percent and loamy fine sand 5 percent |
| Texture about 40 inches down | sandy clay loam 88 percent, cemented material 5 percent and loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 80 percent, clayey sand (SC) 8 percent and silty clay (CL ML) 5 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 64 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 70 percent of the area |
The USDA soil survey does not map bedrock in the top five feet of Alfred, but that does not rule out rock deeper down. It maps a seasonal water table within 60 inches across 64 percent of the area, so pits may need pumping. Flood prone soils are not mapped in Alfred, so we account for Opelika soils when planning a boring alignment. High steel corrosion risk covers 70 percent, which makes casing and tracer wire material a line owner decision; With Runge among Alfred’s soil series, we consider HDPE to address soil corrosion concerns along boring routes. The Lissie Formation, of Pleistocene age, includes sand, silt, clay and minor gravel, while mapped Alluvium adds mixed sediment near local creek routes.
How do we drill Alfred’s sandy clay loam for a Tecolote Creek crossing while managing the bore path?
At about 40 inches, sandy clay loam is the main mapped texture in Alfred. We plan the bore around that clay and the seasonal water table, then adjust the fluid and reaming to the route.
- Opelika soil is often fine sandy loam at the surface, but clay is common below; we use staged reaming to keep the hole suited to the pipe.
- With sandy clay loam mapped at about 40 inches, sticky cuttings can collect on the reamer; thinner fluid and a planned same day pullback can help.
- A seasonal water table is mapped within 60 inches across 64 percent of Alfred, so we keep pits small and pump them if groundwater enters.
- High steel corrosion risk is mapped across 70 percent of the area; the line owner chooses casing and tracer wire materials for a route near Tecolote Creek.

What does a bore have to cross near Tecolote Creek in Alfred?
Texas State Highway 359 runs 1.2 mapped roadway miles inside Alfred’s community boundary, with no other highway mapped within 1.5 miles outside it. TxDOT rules call for boring or tunneling beneath existing highway pavement, rather than opening a trench through it. The named streets include Jefferson Street, with 0.36 miles mapped, Pvt Drive Way at 0.26 miles, and Houston Street at 0.2 miles. A route under one of these streets can leave the pavement intact, with work pits placed in dirt beyond the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 359 | State highway | 1.2 roadway miles inside | State highway office |
| Tecolote Creek | Stream | 2.2 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Palo Hueco Creek | Stream | 0.65 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Ruces Creek | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Alfred or within one mile outside the community boundary, so no local track crossing is shown. Tecolote Creek runs 2.2 channel miles inside the boundary; Palo Hueco Creek runs 0.65 miles, and Ruces Creek 0.31 miles. Public mapping shows three street crossings of named streams, so a route may need to account for a creek even when the street is nearby. No lakes or ponds are mapped within one mile of Alfred, but we plan around Ruces Creek when laying out nearby bores. A creek crossing is checked for federal jurisdiction during planning.
Who approves a bore on Alfred roads in Jim Wells County?
Alfred is an unincorporated community, so its streets are not under a city government; county and state authorities handle their roads and permits. For work in the Texas State Highway 359 right of way, the utility owner applies to TxDOT through its online RULIS system, and the TxDOT Corpus Christi District reviews it. For Texas State Highway 359 crossings, we prepare the bore plan and profile and work under the utility owner’s permit. A route at Tecolote Creek is checked for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped in or near Alfred.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities need checking in Jim Wells County near Alfred?
The water provider for the specific Alfred address has to be confirmed with Jim Wells County or the local water district before a bore is planned. EPA drinking water records do not tie water systems to towns, so the provider cannot be matched from the town name alone. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County. That does not identify the line owner at every Houston Street address, so we confirm the owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
Alfred’s median housing year is 1979, and we use that context when planning underground work around existing properties. It estimates 30 percent of homes were built before 1960, 22 percent from 1960 to 1999, and 48 percent in 2000 or later. That mix can mean a job is replacing older lines or adding a newer service along Jefferson Street. Before the drill approaches a marked utility, we hydrovac pothole it to check its actual depth; paint alone shows position, not depth.

Do you cover Alfred and nearby Orange Grove?
Alfred is in Jim Wells County, at an elevation of 144 feet, and its mapped community covers 1.24 square miles. ZIP code 78332 serves the area. South La Paloma is 1.9 miles northeast; Orange Grove is 6.2 miles northeast, and Westdale is 6.4 miles north. Alice, the county seat and nearest larger city, is 9.7 miles southwest. From our Yukon, Oklahoma main office, the drive to Alfred is 582 road miles and 11.5 hours, which can affect mobilization for a project near Tecolote Creek or Texas State Highway 359.
Places near Alfred
- Directional boring in South La Paloma: 1.9 miles northeast
- Directional boring in Orange Grove: 6.2 miles northeast
- Directional boring in Westdale: 6.4 miles north
- Directional boring in Owl Ranch: 7.1 miles west
- Directional boring in Agua Dulce: 7.6 miles southeast
- Directional boring in Alice: 9.7 miles southwest
Which jobs call for a bore near Pvt Drive Way in Alfred?
- Highway crossing: A bore beneath Texas State Highway 359 keeps the existing pavement intact, with the route and cover set through the TxDOT permit.
- Street service: A water or sewer service beneath Jefferson Street can avoid an open cut across the street surface.
- Fiber conduit: A conduit route along Houston Street can be bored beneath pavement and driveways, with the marked utilities exposed first.
- Creek crossing: A bore beneath Tecolote Creek needs a planned route and a check for federal jurisdiction before work is laid out.
- Utility replacement: A replacement line near Pvt Drive Way can use a bore to pass beneath the street while limiting surface disruption.
- Electric conduit: Before a conduit route near Texas State Highway 359 is planned, we confirm which electric line owner serves the specific address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Jefferson Street in Alfred?
For a bore near Jefferson Street, start with the address or map pin, then tell us what goes underground. A water line, fiber conduit or sewer line calls for its pipe or conduit size and the footage, such as a route toward Texas State Highway 359. A sketch or plans help us see the path, access and crossings before we scope the work.
A short service route on Pvt Drive Way with clear access is simpler to plan than a long crossing under Texas State Highway 359 or Tecolote Creek. Price depends on footage, pipe or conduit size, ground conditions, utilities to expose, pavement, crossing complexity, pits, excavator time and sand backfill. Opelika soil and the seasonal water table can affect drilling and pit work. Mobilization also matters because Alfred is 582 road miles from our Yukon yard.
Questions people ask about boring in Alfred
Does Trinity take directional boring work in Alfred, Jim Wells County, and who staffs it?
Yes. Trinity Boring Solutions takes work in Alfred and serves Texas with its own crews and vetted drilling contractor partners. Our main office is in Yukon, Oklahoma, and we stay involved from the first call through the bore log. A route beneath Texas State Highway 359 or along Jefferson Street can be scoped around the actual site.
Who is responsible for Houston Street in Alfred, and can a bore avoid cutting it?
Alfred has no city government because it is an unincorporated community, so county and state authorities handle its roads. Directional boring beneath Houston Street can avoid opening the street surface. If the route enters the Texas State Highway 359 right of way, the utility owner applies for a TxDOT permit.
Could older buried lines near Pvt Drive Way in Alfred need replacement bores?
They could. The American Community Survey 2019 to 2023 estimates that Alfred’s median housing year is 1979 and that 30 percent of homes were built before 1960. Those figures do not date a particular pipe, so we locate and expose marked utilities along Pvt Drive Way before drilling near them.
Could groundwater or wet ground near Tecolote Creek affect bore pits in Alfred?
It could affect the pits. The USDA soil survey maps a seasonal water table within 60 inches across 64 percent of Alfred, and Tecolote Creek runs through the community. We plan pit placement and pumping around site conditions; a creek crossing is also checked for federal jurisdiction during planning.
Does Opelika soil in Alfred corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 70 percent of Alfred, so the line owner should consider casing and tracer wire materials. With Runge among Alfred’s soil series, we consider HDPE to address soil corrosion concerns along boring routes. Opelika soil is widespread here, but the right pipe choice depends on the line and the route near streets such as Jefferson Street.
What ground will an Alfred bore pass through in Opelika soil?
The USDA soil survey maps Opelika soil across 59 percent of Alfred. Fine sandy loam is common at the surface, while sandy clay loam covers 88 percent of the mapped area at about 40 inches. Those are survey patterns, not test borings, so the route near Tecolote Creek still needs site specific planning.
How far is Alfred from the Yukon office, and does Alice make mobilization easier?
Alfred is 582 road miles and an 11.5 hour drive from our Yukon, Oklahoma main office. Alice is 9.7 miles southwest of Alfred, but it is not a Trinity office. The distance from Yukon can affect mobilization for a bore near Texas State Highway 359 or elsewhere in Jim Wells County.
How early should I call 811 for a bore near Jefferson Street in Alfred?
Count back at least two working days from the planned start near Jefferson Street, excluding Saturdays, Sundays and legal holidays. Texas law allows a request no earlier than 14 days before excavation, and the ticket has a 20 day life. If marks wear off or move, have them refreshed through Texas811 before work continues.
What changes the cost of boring beneath Texas State Highway 359 in Alfred?
The route, length, pipe or conduit size, soil, utilities to expose, pavement, pits and creek crossings all affect the price. A TxDOT permitted crossing beneath Texas State Highway 359 may take more planning than a short service route on Jefferson Street. Alfred’s 582 road miles from Yukon also affect mobilization.
Where the Alfred facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alfred
- U.S. Census Bureau, TIGER/Line 2024: Alfred boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Alfred population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alfred housing units and year built
- Macrostrat geologic map compilation: map units under Alfred
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: Alfred elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alfred
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alfred
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alfred, Texas
Type the address of your job in Alfred. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alfred
Same county: Premont · Rancho Alegre · San Diego · Coyote Acres · Alice Acres · Sandia · K-Bar Ranch · Amargosa · Loma Linda East · Ben Bolt. All counties: Texas county list.
