Ben Bolt Texas Directional Boring: Opelika Fine Sandy Loam, US 281, Tranquitas Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work in Ben Bolt for routes that cross US 281 or Tranquitas Creek. From our Yukon, Oklahoma main office, Ben Bolt is 598 road miles away, so we plan crew and equipment mobilization around the route. We work with our own crews and vetted drilling partners. Opelika soil and clay lower in the profile can hold the bore open but build up on the reamer.
Ben Bolt bores at a glance
- Unincorporated community in Jim Wells County, Texas. Population 1,662 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 598 miles, about 11.7 hours of driving.
- Ground: Opelika soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281, US 281 Bypass, FM 625, FM 2508 and FM 1930. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Tranquitas Creek and San Andreas Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 281 in Ben Bolt?
Ben Bolt is 598 road miles from our Yukon yard, so we plan the crew and equipment mobilization for each US 281 area job. The Census Bureau counted 1,662 people here in the 2020 Census. In Jim Wells County, we install water, sewer, gas, electric conduit and fiber; a bore can route those lines beneath a street or driveway without cutting the surface.
Our main office is in Yukon, Oklahoma, and Ben Bolt work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet under the Arkansas River in Tulsa. That reach is different from a typical Ben Bolt service run, where the mapped Opelika soil and nearby US 281 crossings shape the plan.

What does the soil survey show about Opelika soil in Ben Bolt?
The USDA soil survey maps Opelika as 35 percent of the mapped area in Ben Bolt. Fine sandy loam is the leading surface texture, mapped across 68 percent. At about 40 inches below the surface, sandy clay loam covers 71 percent of the area, while clay is mapped under 24 percent. For Ben Bolt, we use mapped Opelika, Delfina, Lattas, and Banquete soil patterns as planning context, not as test borings. For a bore near Tranquitas Creek, the actual route still needs site checks because clay content and moisture can change how the reamer behaves.
| USDA soil survey, inside the Ben Bolt mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Opelika 35 percent, Delfina 15 percent, Lattas 15 percent, Banquete 7 percent and Papalote 7 percent |
| Texture at the surface | fine sandy loam 68 percent, clay 24 percent and loam 5 percent |
| Texture about 40 inches down | sandy clay loam 71 percent, clay 24 percent and clay loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 55 percent, fat clay (CH) 29 percent and clayey sand (SC) 16 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 37 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 51 percent of the area |
Along 3rd Street, we treat the map’s lack of bedrock in Ben Bolt’s top five feet as no proof about deeper ground. The geologic map shows Holocene silt sheet and Chibanian alluvium, which includes clay, sand and silt. Seasonal water tables are mapped within 40 inches across 37 percent of the area, so pits may need pumping. For a crossing near Tranquitas Creek, we do not treat the absence of mapped flood prone soils as a substitute for site review. High steel corrosion risk covers 51 percent, a reason for the line owner to consider casing and tracer wire materials.
How do we plan a Ben Bolt bore through sandy clay loam when the mapped soil series include Banquete?
In Ben Bolt, sandy clay loam is common at about 40 inches, with clay also mapped below. We adjust drilling fluid and reaming to the ground on the specific route, not just the soil map.
- Opelika soil is mapped across 35 percent of Ben Bolt. We use staged reaming and keep fluid suited to the clay so the reamer does not load up.
- At about 40 inches, sandy clay loam is mapped under 71 percent of the area. We track the drill head at the surface and log depth and pitch as the bore advances.
- Seasonal water tables are mapped within 40 inches across 37 percent of Ben Bolt. Near a low spot off FM 625, we plan manageable pits and pumping for water.
- Before drilling near marked lines along 3rd Street, we hydrovac pothole each utility on the bore path. We expose it because surface paint does not show its depth.

What is in the way of a new line near Tranquitas Creek in Ben Bolt?
US 281, the US 281 Bypass, FM 625, FM 2508 and FM 1930 run inside the mapped Ben Bolt boundary. US 281 has 7.5 mapped roadway miles there. TxDOT pavement crossings call for boring or tunneling rather than an open trench. The named streets include 3rd Street, with 0.52 miles mapped, 2nd Street, with 0.48 miles, and Salazar Street, with 0.45 miles. Those surface routes help identify a bore location, but the exact line path and utility marks still need checking.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 7.5 roadway miles inside | State highway office |
| US 281 Bypass | US highway | 3.8 roadway miles inside | State highway office |
| FM 625 | State highway | 3.2 roadway miles inside | State highway office |
| FM 2508 | State highway | 1 roadway miles inside | State highway office |
| FM 1930 | State highway | 0.6 roadway miles inside | State highway office |
| US 281 Business | Highway nearby | Runs along or touches the city limits | State highway office |
| Tranquitas Creek | Stream | 1.98 channel miles inside | Checked for Corps of Engineers jurisdiction |
| San Andreas Creek | Stream | 1.34 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Ben Bolt boundary or within one mile outside it, so no mapped rail crossing is shown. Tranquitas Creek runs 1.98 channel miles through the area, and San Andreas Creek runs 1.34 miles. Public mapping shows 8 street crossings of named streams. A route near Tranquitas Creek needs a creek crossing plan, with Corps jurisdiction checked during planning. We check the one mile area around 2nd Street in Ben Bolt; no lakes or ponds are mapped within that distance.
Who approves a bore on US 281 in Jim Wells County in Ben Bolt?
Ben Bolt is an unincorporated community, so it has no city government; street authority depends on whether the route is county or state right of way. For work in the US 281, FM 625 or other state highway right of way, the line owner, not the driller, applies through TxDOT’s RULIS system. We prepare the bore plan and profile for that application, and TxDOT’s Corpus Christi District reviews it. TxDOT cover rules vary by line type, with a district able to set a different depth in the permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities should we check in Jim Wells County near Ben Bolt?
For a Ben Bolt address, the water provider has to be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the provider cannot be matched from those records. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report service in Jim Wells County. Before planning an electric conduit bore near US 281, we confirm the line owner for the specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Jim Wells County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Ben Bolt’s median housing year at 1986. It estimates 9 percent of homes were built before 1960, 57 percent from 1960 to 1999 and 34 percent in 2000 or later. A bore along 2nd Street could pass older service lines or newer connections, so we hydrovac expose marked utilities on the route before drilling near them. Paint shows position, not depth.

Where is Ben Bolt in relation to Alice and our Yukon yard?
Ben Bolt is an unincorporated census designated place in Jim Wells County, at an elevation of 195 feet and covering 12.24 square miles. In Jim Wells County, Ben Bolt has ZIP codes 78332 and 78342, details we use to identify the project location before underground planning. Alice Acres is 3.3 miles north, Coyote Acres is 4.0 miles northwest, and Alice is 6.5 miles north. Alice is also the county seat and nearest larger city. From our Yukon, Oklahoma yard, the drive is 598 road miles and 11.7 hours, which we account for when planning a Ben Bolt mobilization.
Places near Ben Bolt
- Directional boring in Alice Acres: 3.3 miles north
- Directional boring in Coyote Acres: 4 miles northwest
- Directional boring in Rancho Alegre: 5.1 miles north
- Directional boring in Alice: 6.5 miles north
- Directional boring in Loma Linda East: 9.2 miles northwest
What kinds of bores could come up near 3rd Street in Ben Bolt?
- Highway crossing: A bore beneath US 281 can keep the roadway surface uncut, with the utility owner handling the TxDOT right of way application.
- Street service: A water or sewer line near 3rd Street can pass beneath the road and driveway instead of opening a trench across them.
- Fiber route: A conduit bore along FM 625 can carry fiber while the marked utilities on its path are exposed before drilling.
- Creek crossing: A route beneath Tranquitas Creek needs a planned entry and exit, with Corps jurisdiction checked during planning.
- Electric conduit: Near 2nd Street, we confirm the address’s line owner before planning a conduit bore.
- Drainage crossing: Where unnamed drainage meets a route near Salazar Street, we plan the bore path and pits around the crossing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near 2nd Street in Ben Bolt?
Start with an address or map pin near 2nd Street, US 281 or Tranquitas Creek. The exact spot matters because a street crossing and a creek route call for different access and crossing plans. For work near FM 625, tell us what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us follow the route.
In Ben Bolt, the ground and the route lead the price discussion. Opelika soil and clay affect drilling and reaming, while a US 281 or Tranquitas Creek crossing adds planning and exposure work. Length and pipe size matter too, along with the number of marked utilities, pavement, pits, excavator time and backfill. Mobilization is another factor because the Yukon yard is 598 road miles away.
Questions people ask about boring in Ben Bolt
Does Trinity take directional boring jobs in Ben Bolt and Jim Wells County?
Yes. We take directional boring work in Ben Bolt, and the job can be staffed by our crews or a partner drilling contractor Trinity has vetted. The Yukon office stays your point of contact through the bore log. A route near US 281 is planned around its exact access and crossing needs.
Can Opelika soil in Ben Bolt corrode steel casing?
It can be a concern: the USDA soil survey maps high steel corrosion risk across 51 percent of Ben Bolt. The line owner chooses coatings or other material details for steel casing and tracer wire. HDPE is another pipe option that is not subject to soil corrosion.
What ground will a bore pass through in Ben Bolt near Opelika soil?
The USDA soil survey maps Opelika across 35 percent of Ben Bolt. At about 40 inches below the surface, sandy clay loam is mapped under 71 percent of the area, with clay under 24 percent. Those mapped patterns are not test borings, so the route near Tranquitas Creek still needs field planning.
Will a bore in Ben Bolt hit rock in areas mapped as Opelika soil?
Bedrock is not mapped in Ben Bolt’s top five feet, though that does not settle what lies deeper. The geologic map identifies Holocene silt sheet and Chibanian alluvium with mixed clay, sand and silt. We plan the bore around the route and adjust if drilling shows harder material.
Who approves a Ben Bolt bore beneath US 281?
For a bore in US 281 right of way, the line owner submits the utility application through TxDOT’s RULIS system, and TxDOT’s Corpus Christi District reviews it. We prepare the bore plan and profile for the owner’s filing. Cover requirements depend on whether the line carries electric, communications, water or sewer.
Can you bore a line under Tranquitas Creek in Ben Bolt?
A bore can be planned beneath Tranquitas Creek, which runs 1.98 channel miles through Ben Bolt. When planning a crossing of Tranquitas Creek, we check whether the route falls under US Army Corps of Engineers jurisdiction. The route, entry and exit pits, and creek bank conditions all need to be considered before the bore is set.
How early should I call 811 for a Ben Bolt bore near 3rd Street?
For a planned start near 3rd Street, count back at least two working days for the Texas811 locate request, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days ahead. If the start moves beyond the ticket’s 20 day life, a new request is needed; worn or moved marks must be refreshed through Texas811.
How far is Ben Bolt from the Yukon office, and does Alice help with mobilization?
Ben Bolt is 598 road miles from our Yukon, Oklahoma main office, with a listed drive of 11.7 hours. Alice is 6.5 miles north and is the county seat, but the job’s mobilization is planned from Yukon. A specific route near Alice or US 281 helps us assess access and equipment needs.
What affects the cost of directional boring in Ben Bolt under US 281?
The price depends on the route and scope, not just footage. Opelika soil and clay affect drilling, while a US 281 crossing can add permit planning and pavement considerations. Pipe size, bore length, marked utilities to expose, pits, backfill and mobilization from Yukon also factor into the estimate. Creek crossings can add further planning.
Where the Ben Bolt facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ben Bolt
- U.S. Census Bureau, TIGER/Line 2024: Ben Bolt boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Ben Bolt population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ben Bolt housing units and year built
- Macrostrat geologic map compilation: map units under Ben Bolt
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Wells County
- U.S. Geological Survey, Elevation Point Query Service: Ben Bolt elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ben Bolt
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ben Bolt
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ben Bolt, Texas
Type the address of your job in Ben Bolt. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ben Bolt
Same county: Premont · Orange Grove · San Diego · Sandia · Westdale · K-Bar Ranch · South La Paloma · Amargosa · Owl Ranch · Alfred. All counties: Texas county list.
