Baird Texas Directional Boring: Throck Soil, Union Pacific and Ross Creek
Quick Answer: Baird is 313 road miles from our Yukon, Oklahoma main office, and we staff work with our crews or vetted partner drilling contractors. We take directional boring, also called horizontal directional drilling (HDD), for routes that pass beneath Union Pacific tracks in Baird. Throck soil and the 45% average clay at 40 inches can make the reamer sticky, so staged passes and fluid control matter. Cherry Street and Ross Creek routes also need line exposure and crossing plans before drilling starts.
Baird bores at a glance
- County seat of Callahan County, Texas. Population 1,545 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 313 miles, about 6.1 hours of driving.
- Ground: Throck soil is mapped on 29 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 47 percent of the area.
- Highways inside the boundary: Interstate 20, Interstate 20 Business, US 80, US 283 and FM 18. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Ross Creek.
- Public water: City of Baird, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring on Cherry Street in Baird?
Baird is 313 road miles from our Yukon, Oklahoma main office, so we schedule work with our own crews and vetted partner drilling contractors rather than from a local base. At Baird, the Census Bureau Vintage 2024 estimate is 1,545, a population figure we consider when planning underground work. We can bore water, sewer, gas, electric conduit or fiber routes beneath Cherry Street or to services near the City of Baird water system.
Our main office is in Yukon, Oklahoma, and Baird work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our crews have gone more than 25 years without a utility strike, a record we carry near the City of Baird water system and electric service reported in Callahan County by AEP Texas North. Trinity is a family business that started in 1965 and has drilled directionally since 1982.

What ground should a Baird bore expect in Throck soil?
The USDA soil survey maps Throck across 29% of Baird, with clay loam and stony clay loam common at the surface. At 40 inches, the mapped soil averages 45% clay, and 79% of the area is classified as heavy clay at that depth. Clay accounts for 39% of the mapped texture at 40 inches, while sandy ground is not mapped there. For Baird directional boring, we treat mapped soil patterns as planning context, not a substitute for test borings. Sticky clay can build on a reamer and grip the pipe, so the bore plan has to account for the ground along the actual route.
| USDA soil survey, inside the Baird city limits | What is mapped |
|---|---|
| Soil series mapped | Throck 29 percent, Frio 26 percent, Leeray 13 percent, Rowden 12 percent and Sagerton 10 percent |
| Texture at the surface | clay loam 43 percent, stony clay loam 30 percent and clay 13 percent |
| Texture about 40 inches down | clay 39 percent, silty clay loam 26 percent and bedrock 18 percent |
| Engineering class about 40 inches down | lean clay (CL) 67 percent and fat clay (CH) 13 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 47 percent of the area (18 percent hard rock, 29 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 26 percent of the area |
| High corrosion risk for uncoated steel | 95 percent of the area |
Bedrock is mapped within 60 inches in 47% of Baird, with typical depth at 28 inches; the map also identifies hard bedrock in part of the area. The Quaternary shale and limestone clast disintegration residuum can put rock close to the bore, while the Jagger Bend and Valera Formations, undivided, are mapped as Cisuralian shale, mudstone and limestone. No seasonal water table is mapped within 40 inches, but flood prone soils cover 26% of the area. High steel corrosion risk covers 95%, so casing and tracer wire choices need the line owner’s input.
How do we drill through Baird clay?
Baird’s mapped clay and shallow rock call for a route specific plan. We adjust the drilling fluid and reaming sequence to the soil, then track the head and record depth and pitch along the bore.
- Throck soil is clay heavy, so we use a thinner drilling fluid with polymer and open the hole in stages before pulling pipe through it.
- With mapped bedrock commonly close to the surface, we monitor the drill head at every rod and adjust if it meets a soil to rock transition.
- For a marked utility on a Baird bore path, we hydrovac expose the line before drilling near it; locate paint shows position, not depth.
- At a Ross Creek route, we plan the bore to stay beneath the channel and check during planning for possible Corps jurisdiction.

Where might a Baird line pass under Union Pacific?
Interstate 20 has 3.2 mapped roadway miles inside Baird, alongside Interstate 20 Business, US 80, US 283, FM 18 and FM 2047. A route under Interstate 20 or another state highway needs a bore plan that accounts for the road right of way and the required cover. Cherry Street is the longest named street in the city at 1.67 miles, followed by 4th Street at 1.47 miles and 3rd Street at 1.41 miles. Those streets give a route its local access and pavement constraints.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 3.2 roadway miles inside | State highway office |
| Interstate 20 Business | Interstate | 1.7 roadway miles inside | State highway office |
| US 80 | US highway | 1.7 roadway miles inside | State highway office |
| US 283 | US highway | 1.7 roadway miles inside | State highway office |
| FM 18 | State highway | 1 roadway miles inside | State highway office |
| FM 2047 | State highway | 0.3 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.38 track miles inside | The railroad |
| Ross Creek | Stream | 2.42 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mexia Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Baird | Lake or pond | 147 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Baird Railroad Lake | Lake or pond | 44 acres, inside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 2.38 track miles within Baird on its Baird Subdivision, and public mapping shows two street and rail crossings in the city. Any bore under those tracks needs an agreement with the railroad, which sets the casing, depth and flagging details. Ross Creek runs 2.42 channel miles through Baird, with nine mapped street crossings of named streams. A creek route is planned with its channel in mind, and Lake Baird and Baird Railroad Lake are also nearby or within the city limits.
Who approves a Baird bore in Callahan County?
Because Baird is incorporated, we coordinate work on its city streets with the city before boring. A bore in the right of way of Interstate 20, US 80, US 283, FM 18 or FM 2047 needs a TxDOT utility permit reviewed by the TxDOT Abilene District. The utility owner submits the application through TxDOT’s RULIS system, while we prepare the bore plan and profile and work under the owner’s permit. Cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. At a Union Pacific crossing in Baird, we plan around the railroad’s agreement before advancing a boring. Ross Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are near the City of Baird water system?
The City of Baird public water system uses surface water and serves 1,534 people through 977 service connections. A bore near its lines needs a route that accounts for those existing connections. County records report electric service by AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative. That list does not establish which provider owns a line at a specific address, so the line owner must be confirmed before we plan an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Baird | Public water system | Surface water | 977 connections, 1,534 people served |
| AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative | Electric utilities reporting service in Callahan County | EIA Form 861 | Confirm the line owner by address |
Baird’s American Community Survey 2019 to 2023 five year estimate gives a median housing year of 1950, context we consider in underground planning. The survey estimates 65% of homes were built before 1960, 31% from 1960 to 1999 and 4% in 2000 or later. That age profile can mean work involves replacing older lines as well as adding services. For a proposed crossing under 3rd Street, we hydrovac pothole each marked utility on the bore path before drilling near it; paint shows where a line runs, not how deep it is.

What is near Baird and Putnam for a bore crew?
Baird is the incorporated county seat of Callahan County, covers 2.66 square miles and sits at an elevation of 1,715 feet. Its ZIP code is 79504. Clyde is 6.3 miles west, Putnam is 11.8 miles east, and Moran is 17.0 miles northeast. Abilene, the nearest larger city, is 20.4 miles west. From our Yukon, Oklahoma main office, the road distance is 313 miles and the drive is 6.1 hours. That distance is part of planning crew mobilization for a bore near Interstate 20 or Ross Creek.
Places near Baird
- Directional boring in Clyde: 6.3 miles west
- Directional boring in Putnam: 11.8 miles east
- Directional boring in Moran: 17 miles northeast
- Directional boring in Potosi: 17.3 miles west
- Directional boring in Abilene: 20.4 miles west
Which jobs call for a bore near 4th Street in Baird?
- Highway crossing: A route below Interstate 20 needs a bore plan that accounts for pavement, right of way cover and the line being installed.
- Water service: A connection near the City of Baird system needs a path around existing service lines and room for safe utility exposure.
- Fiber route: A fiber conduit beneath Cherry Street can avoid an open cut through its pavement and driveways.
- Creek crossing: A bore below Ross Creek is planned to stay under the channel, with jurisdiction checked during planning.
- Rail crossing: A Union Pacific track bore needs the railroad agreement to set casing, depth and flagging.
- Street service: A route near 4th Street needs marked utilities exposed before drilling near them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Baird bore near Interstate 20?
For a bore near Interstate 20 or Cherry Street, start with the job address or a map pin. Tell us what will go in the ground, such as water line or fiber conduit, then give the pipe or conduit size and the footage. A sketch or plans help us see nearby streets, tracks or Ross Creek before we set the route.
Price starts with the 313 road miles from Yukon, then the Throck clay and any shallow rock along the route. The scope also changes with pipe size and length, crossings of Interstate 20 or Union Pacific tracks, and how many utilities need exposure. Pavement, Ross Creek or drainage crossings, pits, excavator time and sand backfill all affect the work. High profile or emergency timing and mobilization also shape the plan.
Questions people ask about boring in Baird
Does Trinity Boring Solutions take directional boring work in Baird, Callahan County?
Yes. We take directional boring work in Baird and handle the job through our Yukon office, using our own crews or vetted partner drilling contractors. The city is 313 road miles from Yukon. A route near Cherry Street or the City of Baird water system can be planned with the local streets and marked utilities in view.
What does a bore under Union Pacific in Baird need?
A bore beneath Union Pacific track needs an agreement with the railroad that owns it. The agreement sets the casing, depth and flagging details for the crossing. Union Pacific has 2.38 track miles in Baird on the Baird Subdivision, so the exact crossing location has to be part of the proposed route.
Can a line be bored under Ross Creek in Baird?
A bore under Ross Creek can be considered, with the route planned to pass below the channel. During Baird crossing planning, we check whether the US Army Corps of Engineers has jurisdiction before work proceeds. Ross Creek runs 2.42 channel miles through Baird, so the proposed crossing point and channel conditions guide the bore plan.
When we plan boring in Baird, who runs the public water system, and where does its water come from?
The City of Baird owns the public water system, and its source is surface water. Baird’s system serves 1,534 people through 977 service connections, figures we keep in view when planning underground work. Before a nearby bore is laid out, the proposed route needs to account for the water lines and connections serving Baird.
Which electric company should I check with before a conduit bore in Baird, Callahan County?
Confirm the line owner for the specific Baird address before planning an electric conduit bore. AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative report electric service in Callahan County, but that does not identify the provider at every address. Their line location and conduit requirements inform the route.
Does Baird control 3rd Street, and can a bore avoid cutting it?
On Baird city streets, we coordinate with the city because incorporation places those streets under city ownership. A directional bore can pass beneath 3rd Street without an open cut through the road when the route and ground allow it. Marked utilities along the path are exposed before the drill approaches them.
How far is Baird from Yukon, and does Abilene change the job plan?
From our Yukon, Oklahoma main office, Baird is 313 road miles and a 6.1 hour drive, useful for scheduling mobilization. Abilene is 20.4 miles west and is the nearest larger city, but the distance from Yukon still affects crew mobilization. The route near Interstate 20 or another local feature helps define what equipment and planning the job needs.
How much notice does Texas811 need for a bore on Cherry Street in Baird?
A Texas811 locate request for Cherry Street must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start moves more than 14 days beyond the original notice, make a new request. In Baird, we have worn or moved marks refreshed through Texas811 before directional boring work continues.
What affects the cost of directional boring near Interstate 20 in Baird?
The job scope sets the price, with the 313 mile trip from Yukon, Throck clay or shallow rock, and crossings of Interstate 20 or Union Pacific all affecting the plan. Pipe size and bore length matter too, as do pavement, utility exposure, Ross Creek or drainage crossings, pits and excavator time.
Where the Baird facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Baird
- U.S. Census Bureau, TIGER/Line 2024: Baird boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Baird
- U.S. Census Bureau, American Community Survey 2019 to 2023: Baird housing units and year built
- Macrostrat geologic map compilation: map units under Baird
- U.S. EPA Safe Drinking Water Information System: public water systems serving Baird
- U.S. Department of Transportation, North American Rail Network: track owners in Callahan County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Callahan County
- U.S. Geological Survey, Elevation Point Query Service: Baird elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Baird
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Baird
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Baird, Texas
Type the address of your job in Baird. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Baird
Same county: Cross Plains. All counties: Texas county list.
