Cross Plains Texas Directional Boring: Pedernales Soil, Bee Branch And Texas State Highway 206
Quick Answer: What does the top five feet look like near Bee Branch, and what lies under it? The USDA soil survey maps mostly fine sandy loam near 5th Street, with sandy clay common about 40 inches down. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Cross Plains for lines that need to pass beneath Bee Branch or streets without an open cut. The Yukon main office is 286 road miles from Texas State Highway 206. Heavy clay can grip a reamer, so we manage fluid and reaming carefully.
Cross Plains bores at a glance
- Incorporated city in Callahan County, Texas. Population 949 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 286 miles, about 6.3 hours of driving.
- Ground: Pedernales soil is mapped on 46 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 2 percent of the area.
- Highways inside the boundary: Texas State Highway 206, Texas State Highway 36, FM 880 and FM 374. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bee Branch and Turkey Creek.
- Public water: City of Cross Plains, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Cross Plains near Bee Branch?
What does the top five feet look like along 5th Street, and what lies below it? The USDA soil survey maps fine sandy loam at the surface and sandy clay commonly about 40 inches down. Cross Plains is in Callahan County, with a population of 949 in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber for routes along streets such as 5th Street or beneath Bee Branch.
Our main office is in Yukon, Oklahoma, and Cross Plains work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, and we have done directional boring since 1982. Our record is no utility strike in over 25 years, a focus that matters around the City of Cross Plains water lines and the electric lines reported in Callahan County.

How does Cross Plains Pedernales soil affect a bore?
Pedernales is the leading mapped soil series in Cross Plains, covering 46 percent of the area in the USDA soil survey. Surface textures are mostly fine sandy loam, loam and loamy fine sand. About 40 inches down, sandy clay is mapped under 54 percent of the area, and sandy clay loam under 20 percent. We treat mapped fine sandy loam in Cross Plains as soil pattern information, not test borings, when planning a bore. The deeper clay can hold an open hole, but it may stick to a reamer or grip pipe, so the drilling fluid and reaming sequence matter.
| USDA soil survey, inside the Cross Plains city limits | What is mapped |
|---|---|
| Soil series mapped | Pedernales 46 percent, Cisco 20 percent, Sagerton 12 percent, Abilene 9 percent and Demona 5 percent |
| Texture at the surface | fine sandy loam 48 percent, loam 25 percent and loamy fine sand 22 percent |
| Texture about 40 inches down | sandy clay 54 percent, sandy clay loam 20 percent and clay 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 54 percent and clayey sand (SC) 46 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 2 percent of the area (0 percent hard rock, 2 percent weathered rock) |
| Seasonal water table within 60 inches | 5 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 28 percent of the area |
Bedrock is mapped within 60 inches in 2 percent of the area, so the survey does not map it across most of the top five feet. A seasonal water table within 60 inches is mapped in 5 percent, and flood prone soils in 3 percent. High steel corrosion risk is mapped in 28 percent, a concern to discuss for steel casing and tracer wire. The geologic map lists Antlers Sand, Aptian, with sand, clay and conglomerate; that regional unit is not a site specific bore log.
How do crews handle Cross Plains sandy clay?
At 40 inches, sandy clay is the leading mapped texture in Cross Plains. We adjust fluid and reaming to the ground, while keeping the bore path and marked utilities in view near 5th Street and Bee Branch.
- In Pedernales soils, we match the fluid to the sticky clay and ream in stages so clay is less likely to build on the reamer.
- Where sandy clay may grip the pipe, we plan the pull soon after opening the hole and have the pipe ready for the final ream.
- Near Bee Branch, we plan the bore depth to stay beneath the channel and check during planning whether the crossing falls under Corps jurisdiction.
- Along 5th Street, we hydrovac each marked utility on the route before drilling near it, then track and log the drill head depth and pitch.

What is in the way of a new line in Cross Plains near 5th Street?
Texas State Highway 206 and Texas State Highway 36 run through Cross Plains, along with FM 880 and FM 374. Texas State Highway 279 is 0.8 miles outside the town limits. A bore on 5th Street, the longest named street at 3.65 miles in town, needs a route planned around its pavement and buried lines. 4th Street runs 3.29 miles and 3rd Street 3.12 miles, giving crews other local corridors to check for the proposed line and access.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 206 | State highway | 1.5 roadway miles inside | State highway office |
| Texas State Highway 36 | State highway | 1 roadway miles inside | State highway office |
| FM 880 | State highway | 0.7 roadway miles inside | State highway office |
| FM 374 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 279 | Highway nearby | 0.8 miles outside | State highway office |
| Bee Branch | Stream | 0.27 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Turkey Creek | Stream | 0.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Cross Plains or within one mile outside it, and none is mapped at a street crossing. Bee Branch has 0.27 channel miles in town and Turkey Creek has 0.15 channel miles. No street crossing of either named stream is mapped. A proposed bore near Bee Branch still needs a site review for the actual path, access and creek conditions. We see no lakes or ponds mapped within one mile of Cross Plains, while Bee Branch and Turkey Creek are streams to account for during bore planning.
Whose permission does Cross Plains work in Callahan County need?
Cross Plains is an incorporated town, so its city streets belong to the town; work on Texas State Highway 206, Texas State Highway 36, FM 880 or FM 374 right of way needs a TxDOT utility permit. The utility that owns the line files through TxDOT’s RULIS system, and the TxDOT Abilene District reviews it. For a Texas State Highway 36 crossing, we prepare the bore plan and profile and work under the utility owner’s permit through TxDOT Abilene District. For electric or communication lines crossing a highway, the cover is at least 60 inches below the lowest point of the crossed grade; water also needs 60 inches at a crossing.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Cross Plains water system?
The City of Cross Plains public water system uses groundwater wells and serves 926 people through 584 service connections. A new water service near 5th Street may tie into existing lines, so the connection point and route need to be checked. A city owned electric system is not identified in the records. AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative report electric service in Callahan County, so the line owner for a conduit route needs confirming before the bore is planned.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Cross Plains | Public water system | Groundwater wells | 584 connections, 926 people served |
| AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative | Electric utilities reporting service in Callahan County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Cross Plains at 1964. The same survey estimates 48 percent of homes were built before 1960, while 17 percent date to 2000 or later. That mix can mean work on older service lines as well as new connections along 2nd Street. We hydrovac pothole each marked utility on the bore path before the drill approaches; paint shows a line’s position, not its depth.

Do you cover Cross Plains from Brownwood and beyond?
Cross Plains is in Callahan County, at an elevation of 1,737 feet, and covers 1.2 square miles. Its ZIP code is 76443. Rising Star is 11.8 miles east, Putnam is 16.9 miles north, Thunderbird Bay is 17.3 miles southeast, May is 17.4 miles southeast, and Cisco is 21.0 miles northeast. Baird, the county seat, is 22.9 miles northwest; Brownwood is 30.7 miles south. The Yukon, Oklahoma main office is 286 road miles away, about 6.3 hours by drive, which affects mobilization for Cross Plains work.
Places near Cross Plains
- Directional boring in Rising Star: 11.8 miles east
- Directional boring in Putnam: 16.9 miles north
- Directional boring in Thunderbird Bay: 17.3 miles southeast
- Directional boring in May: 17.4 miles southeast
- Directional boring in Cisco: 21 miles northeast
- Directional boring in Brownwood: 30.7 miles south
What boring work comes up in Cross Plains near 4th Street?
- Highway crossing: A line under Texas State Highway 206 needs a bore plan, TxDOT review and cover set by the line type.
- Water service: A connection near 5th Street may need to tie into the City of Cross Plains groundwater system.
- Fiber route: A route along 4th Street can use a bore to pass beneath pavement while marked utilities are exposed first.
- Creek crossing: A proposed line under Bee Branch needs a planned depth beneath the channel and a jurisdiction check.
- Electric conduit: A conduit route near 2nd Street starts with identifying which Callahan County reporting utility owns the line.
- Acreage service: A route toward Texas State Highway 279 can be assessed for access, length and mobilization from Yukon.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Cross Plains bore near 2nd Street?
For a Cross Plains quote, send the address or map pin, what goes in the ground, the pipe or conduit size and footage; a sketch or plans help. A route along 2nd Street or beneath Bee Branch gives us a starting point for checking access, marked utilities and the bore path.
A short, clear route along 2nd Street with few utilities to expose is simpler to plan than a longer crossing beneath Texas State Highway 206. Price changes with length, pipe or conduit size, soil and rock, crossings and potholing, pavement, creek conditions, pits, excavator time and backfill. The sandy clay mapped under much of Cross Plains can affect reaming and fluid needs. The 286 road miles from Yukon also factor into mobilization, as do emergency or high profile requirements.
Questions people ask about boring in Cross Plains
Does Trinity Boring Solutions take directional boring jobs in Cross Plains and Callahan County?
Yes. We take directional boring work in Cross Plains, and our own crews or vetted partner contractor crews handle the field work. The Yukon main office stays your point of contact from the first call through the bore log. For routes near 5th Street, share the proposed path and what line is going in.
Will a Cross Plains bore hit rock below Pedernales soil?
The USDA soil survey maps bedrock within 60 inches in 2 percent of Cross Plains, so bedrock is not mapped across most of the top five feet. The geologic map lists Antlers Sand, Aptian, with sand, clay and conglomerate. At a Cross Plains site mapped as Cisco, we verify field conditions because the soil map does not establish bore depth.
Does the TxDOT Abilene District approve a bore under Texas State Highway 206 in Cross Plains?
TxDOT reviews the utility permit through the Abilene District for work in the right of way of Texas State Highway 206. The utility that owns the line submits the application in RULIS. We prepare the bore plan and profile for that filing and work under the permit issued to the utility owner.
Can a line be bored under Bee Branch in Cross Plains?
A bore can be planned beneath Bee Branch, whose mapped channel runs 0.27 miles within town. The route needs a depth plan that stays under the channel. During planning, the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction.
Who runs the Cross Plains water system, and where does its water come from?
The City of Cross Plains owns the public water system, which draws from groundwater wells. EPA records list 584 service connections and 926 people served. A proposed service near 4th Street still needs a route and connection point checked against the existing lines.
Which company owns electric lines in Cross Plains, Callahan County, for a conduit bore?
AEP Texas North, Comanche County Electric Cooperative Association and Taylor Electric Cooperative report electric service in Callahan County. The records do not identify one provider for every Cross Plains address. Confirm the owner of the line near 2nd Street before planning a conduit bore.
How early should I call Texas811 before boring near 5th Street in Cross Plains?
Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from the planned start near 5th Street. For a Cross Plains bore in Callahan County, we allow Texas811 at least two working days to mark underground lines. Do not request more than 14 days before excavation; if the start slips more than 14 days past the original notice, make a new request. On Main Street in Cross Plains, we have worn or moved utility marks refreshed before we continue boring.
How far is Cross Plains from the Yukon office, and does Brownwood change the job?
Cross Plains is 286 road miles, or about 6.3 drive hours, from our Yukon, Oklahoma main office. Brownwood is 30.7 miles south of town, but mobilization is based on the job location and scope. A route near Bee Branch or Texas State Highway 206 can also add crossing and permit planning.
What affects the cost of a directional bore under Texas State Highway 206 in Cross Plains?
The job scope sets the price, not the highway name alone. Length, pipe size, soil, rock, utility exposures, pavement, creek crossings, pits and backfill all matter. A bore under Texas State Highway 206 also has a TxDOT permit path and required cover based on line type. Mobilization from Yukon affects the job as well.
Where the Cross Plains facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cross Plains
- U.S. Census Bureau, TIGER/Line 2024: Cross Plains boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Cross Plains
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cross Plains housing units and year built
- Macrostrat geologic map compilation: map units under Cross Plains
- U.S. EPA Safe Drinking Water Information System: public water systems serving Cross Plains
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Callahan County
- U.S. Geological Survey, Elevation Point Query Service: Cross Plains elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cross Plains
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cross Plains
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cross Plains, Texas
Type the address of your job in Cross Plains. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cross Plains
Same county: Clyde · Baird. All counties: Texas county list.
