Beaver Creek Texas Directional Boring: Zack Soil, FM 3058 And Berry Creek
Quick Answer: Beaver Creek Water Control and Improvement District 1 uses groundwater, and four utilities report county electric service, so we identify the line owner before a bore. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes such as a crossing beneath Berry Creek. Our Yukon, Oklahoma main office is 392 road miles from Beaver Creek, where FM 3058 crosses the mapped community. Zack fine sandy loam covers 37 percent of the mapped area, and clay at depth can grip pipe during a pull.
Beaver Creek bores at a glance
- Unincorporated community in Burleson County, Texas. Population 910 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 392 miles, about 7.8 hours of driving.
- Ground: Zack soil is mapped on 37 percent of the area, with loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 3058. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Berry Creek.
- Public water: Beaver Creek Water Control and Improvement District 1, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles Beaver Creek bores near FM 3058?
Beaver Creek Water Control and Improvement District 1 supplies groundwater, while Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative report electric service in the county; check line ownership before setting a conduit route. The Census Bureau counted 910 residents in 2020. We install water, sewer, gas, electric conduit and fiber along routes such as Pin Oak Lane and Beaver Creek Drive, with the line owner and plans shaping the path.
Our main office is in Yukon, Oklahoma, and Beaver Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that began in 1965 and has drilled directionally since 1982. We have had no utility strike in over 25 years, a record we bring to work around the Beaver Creek water district and buried electric lines.

What is Beaver Creek ground like to bore through Zack soil?
The USDA soil survey maps Zack fine sandy loam across 37 percent of Beaver Creek and Zulch fine sandy loam across 29 percent. Robco Tanglewood complex accounts for 13 percent, and Uhland fine sandy loam for 9 percent. At about 40 inches below the surface, loam is mapped under 37 percent of the area and clay under 32 percent. The survey also maps 31 percent average clay at that depth. Clay can cling to a reamer and grip pipe, so the drilling fluid and reaming sequence need to suit the ground.
| USDA soil survey, inside the Beaver Creek mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Zack 37 percent, Zulch 29 percent, Robco 13 percent, Uhland 9 percent and Gredge 4 percent |
| Texture at the surface | fine sandy loam 80 percent, loamy fine sand 16 percent and loam 3 percent |
| Texture about 40 inches down | loam 37 percent, clay 32 percent and sandy clay loam 16 percent |
| Engineering class about 40 inches down | lean clay (CL) 63 percent and fat clay (CH) 33 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 22 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 45 percent of the area |
The USDA soil survey does not map bedrock within 60 inches in Beaver Creek, though that does not rule out rock deeper down. A seasonal water table is mapped within 60 inches across 22 percent of the area, so pits may need pumping. Flood prone soils cover 9 percent, making channel depth important near Berry Creek. High steel corrosion risk is mapped across 45 percent, a concern for uncoated steel casing and tracer wire. The Yegua Formation, of Bartonian age, includes clay and sandstone, so deeper conditions may differ from the surface soils.
What does it take to bore Beaver Creek loam?
Zack and Zulch fine sandy loam dominate the USDA map, with clay common at depth. We plan the bore around that mix, the route, and any marked lines along Beaver Creek Drive or FM 3058.
- We check the route and locate marks near FM 3058 first; paint shows a line’s position, not its depth, so marked utilities are exposed before drilling approaches.
- Where Zack fine sandy loam gives way to clay at depth, we use a thinner fluid mix and staged reaming to limit sticky cuttings and pipe grip.
- If a route approaches a seasonal water table mapped within 60 inches, we keep pits small and pump water as needed before working the bore.
- At Berry Creek, we plan the bore below the channel and check for Corps jurisdiction; a walkover locator tracks the head and logs depth and pitch.

What is in the way of a new line in Beaver Creek near Berry Creek?
FM 3058 is the only mapped state highway inside Beaver Creek, with 0.1 mapped roadway miles in the community. No state highways are listed within 1.5 miles outside the boundary. Beaver Creek Drive is the longest named street at 3.0 miles, followed by Mallard Drive at 2.24 miles and Pin Oak Lane at 2.18 miles. A route under any of these roads needs a plan that accounts for pavement and marked utilities. Boring can keep the road surface uncut, with pits placed off the travel path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 3058 | State highway | 0.1 roadway miles inside | State highway office |
| Berry Creek | Stream | 1.77 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Davidson Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lewis Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Ryan Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Sessums Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Beaver Creek or within one mile outside it, and none of the mapped street and rail crossings fall inside the community. Berry Creek runs 1.77 channel miles within the boundary, and one street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile. A creek route needs depth planning beneath the channel, and its jurisdiction should be checked during design.
Do I need a permit to bore in Beaver Creek, Burleson County?
Beaver Creek is unincorporated, so there is no city government to approve its streets; street authority rests with Burleson County or the state, depending on the road. FM 3058 is a state highway, so work in its right of way needs a TxDOT utility permit reviewed by the Bryan District. The utility that owns the line submits the application through RULIS, while we prepare the bore plan and profile and work under that permit. Berry Creek crossings are checked during planning for possible Corps jurisdiction. No railroad is mapped inside or within one mile of the community.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the buried lines in Beaver Creek, Burleson County?
Beaver Creek Water Control and Improvement District 1 is a local government water system using groundwater wells. It serves 1,407 people through 469 service connections. Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative report electric service in Burleson County, but that does not identify the owner at every address. Before a conduit bore near Beaver Creek Drive, we confirm the line owner and use hydrovac potholing to expose marked utilities before drilling close to them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Beaver Creek Water Control and Improvement District 1 | Public water system | Groundwater wells | 469 connections, 1,407 people served |
| Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative | Electric utilities reporting service in Burleson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Beaver Creek’s median housing year at 1986. They show 3 percent of homes built before 1960, 79 percent from 1960 to 1999, and 18 percent from 2000 onward. Those figures do not date buried lines. A replacement bore near Mallard Drive may follow older infrastructure, while a new service may need a different route; potholing marked lines helps establish their actual depth first.

What is near Beaver Creek and Snook?
Beaver Creek is an unincorporated community in Burleson County, with an elevation of 300 feet and a land area of 3.1 square miles. Its ZIP code is 77836. Lyons is 3.3 miles southeast, Snook is 5.9 miles northeast, and Tunis is 6.5 miles north. Caldwell, the county seat, is 9.9 miles northwest; College Station is the nearest larger city, 18.2 miles northeast. From Trinity’s Yukon, Oklahoma main office, the road trip to Beaver Creek is 392 miles and 7.8 hours, which affects mobilization for work near FM 3058.
Places near Beaver Creek
- Directional boring in Lyons: 3.3 miles southeast
- Directional boring in Snook: 5.9 miles northeast
- Directional boring in Tunis: 6.5 miles north
- Directional boring in Somerville: 7.6 miles south
- Directional boring in Caldwell: 9.9 miles northwest
- Directional boring in College Station: 18.2 miles northeast
What kinds of bores come up in Beaver Creek near Pin Oak Lane?
- Highway crossing: A bore beneath FM 3058 needs a route and profile for the TxDOT permit held by the utility owner.
- Water service: A service route near Beaver Creek Drive can pass below the surface instead of opening the street for the line.
- Fiber route: Pin Oak Lane gives a named corridor to assess for conduit, with hydrovac potholes needed at marked utility conflicts.
- Creek crossing: Berry Creek calls for channel depth planning and a check for Corps jurisdiction during design.
- Water main work: A replacement route near the Beaver Creek Water Control and Improvement District 1 system needs the line owner and existing utilities identified.
- Street service: Mallard Drive may suit a new service bore where pavement or other surface features should remain undisturbed.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore in Beaver Creek near Beaver Creek Drive?
For a route near Beaver Creek Drive, start with its address or map pin and say what will go in the ground. Give us the pipe or conduit size and the footage, whether the work follows Pin Oak Lane or approaches Berry Creek. A sketch or plans help us see the route, access, and nearby crossings before we scope the bore.
Mobilization starts with the 392 road miles from Yukon. From there, price depends on bore length and pipe size, the Zack and Zulch soils, and what the route crosses. A Berry Creek crossing or work beneath FM 3058 can add planning and exposure needs. Pavement, concrete, hydrovac potholes, pits, excavator time, sand backfill, and emergency or high profile work also shape the job scope.
Questions people ask about boring in Beaver Creek
Does Trinity take directional boring jobs in Beaver Creek, Burleson County, and how are crews assigned?
Yes. We take directional boring work in Beaver Creek and staff it with our own crews or through satellite yards operated by drilling contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is near Pin Oak Lane or FM 3058.
Who runs the Beaver Creek public water system, and where does the water come from?
Beaver Creek Water Control and Improvement District 1 runs the public water system, which draws from groundwater wells. Public records list 469 service connections and 1,407 people served. That ownership information helps identify who to coordinate with for a water line route near Beaver Creek Drive.
Which utilities report electric service in Beaver Creek, Burleson County, and who confirms conduit specs?
Entergy Texas, City of Bryan, Bartlett Electric Cooperative and Bluebonnet Electric Cooperative report service in Burleson County. Those reports do not establish which company owns a line at a particular address. Confirm the line owner and conduit requirements for the route near FM 3058 before laying out a bore.
Who controls Beaver Creek streets such as Pin Oak Lane, and does a bore require cutting the road?
Beaver Creek has no city government, so street authority belongs to Burleson County or the state, depending on the road. A bore along Pin Oak Lane can avoid opening the street surface, but access, marked utilities, and the responsible road authority still affect the plan.
What do Beaver Creek housing ages near Mallard Drive suggest about replacement bores?
The American Community Survey 2019 to 2023 estimates give Beaver Creek a median housing year of 1986. Housing age does not tell us when a buried line was installed. For a replacement route near Mallard Drive, we expose marked utilities first so the bore plan reflects their actual locations and depths.
Can groundwater or flood prone ground affect Beaver Creek bore pits near Berry Creek?
Yes. The USDA soil survey maps a seasonal water table within 60 inches across 22 percent of Beaver Creek and flood prone soils across 9 percent. Near Berry Creek, we plan below the channel and may need to pump water from pits if the ground is wet.
How much notice does Texas811 need for Beaver Creek Drive, and what happens if marks move?
Paint along Beaver Creek Drive shows position, not depth, and Texas law requires a locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead. If work slips more than 14 days, request a new ticket; refresh worn or moved marks through Texas811 before continuing.
How far is Beaver Creek from Yukon, and does the drive from College Station change the job?
Beaver Creek is 392 road miles and 7.8 drive hours from our Yukon, Oklahoma main office. College Station is 18.2 miles northeast of the community, but the long mobilization from Yukon can affect the job scope for work near FM 3058.
What affects the cost of directional boring in Beaver Creek near FM 3058?
The job scope sets the price, including bore length, pipe or conduit size, ground, crossings, and access. Zack soil and clay at depth can affect drilling; work beneath FM 3058 may require highway planning. Creek crossings, pavement, potholing, pits, equipment time, distance from Yukon, and emergency work also matter.
Where the Beaver Creek facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Beaver Creek
- U.S. Census Bureau, TIGER/Line 2024: Beaver Creek boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Beaver Creek population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Beaver Creek housing units and year built
- Macrostrat geologic map compilation: map units under Beaver Creek
- U.S. EPA Safe Drinking Water Information System: public water systems serving Beaver Creek
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Burleson County
- U.S. Geological Survey, Elevation Point Query Service: Beaver Creek elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Beaver Creek
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Beaver Creek
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Beaver Creek, Texas
Type the address of your job in Beaver Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Beaver Creek
Same county: Cade Lakes · Clay · Deanville. All counties: Texas county list.
