trinityboringsolutions.com

Big Wells Texas Directional Boring: Pryor Soil, FM 1867 and Galvaneño Creek

Quick Answer: Pryor sandy clay loam covers 46% of Big Wells and can grip a reamer. On FM 1867, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for utility crossings without cutting pavement. Commerce Street routes can use a bore to avoid an open cut. Big Wells is 576 road miles from our Yukon, Oklahoma main office, so mobilization shapes planning for Travis Street work. Clay loam at about 40 inches is mapped under 46% of the city.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Big Wells bores at a glance

  • Incorporated city in Dimmit County, Texas. Population 455 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 576 miles, about 11.3 hours of driving.
  • Ground: Pryor soil is mapped on 46 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1867 and Texas State Highway 85. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Big Wells, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along Commerce Street in Big Wells?

Pryor sandy clay loam can grip a reamer, so soil conditions matter for a bore near Commerce Street. The Census Bureau Vintage 2024 estimate puts Big Wells at 455 residents in Dimmit County. We install water, sewer, gas, electric conduit and fiber for routes along Travis Street, Crockett or FM 1867, with the bore planned around the existing lines and surface.

Our main office is in Yukon, Oklahoma, and Big Wells work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. Four decades of boring informs how we plan for the mapped Pryor and Brystal soils around Big Wells. You work with Trinity from the first call through the bore log, whichever crew is on site.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Big Wells soil with Pryor ground affect a bore?

The USDA soil survey maps Pryor sandy clay loam across 46% of Big Wells, with Brystal soils across another 46% and Chacon across 8%. At the surface, sandy clay loam and fine sandy loam each cover 46%, while clay loam covers 8%. About 40 inches down, the mapped texture shifts: clay loam is under 46% of the area, sandy clay loam under 46% and clay under 8%. The average clay content at that depth is 31%. These are mapped soil patterns, not a test at a proposed bore.

USDA soil survey, inside the Big Wells city limitsWhat is mapped
Soil series mappedPryor 46 percent, Brystal 46 percent and Chacon 8 percent
Texture at the surfacesandy clay loam 46 percent, fine sandy loam 46 percent and clay loam 8 percent
Texture about 40 inches downclay loam 46 percent, sandy clay loam 46 percent and clay 8 percent
Engineering class about 40 inches downlean clay (CL) 46 percent, clayey sand (SC) 46 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel54 percent of the area

At about 40 inches, 54% of Big Wells is mapped as heavy clay, which can make cuttings sticky and put a grip on the pipe. The USDA soil survey does not map bedrock within the top five feet, a seasonal water table within 60 inches or flood prone soils in the city. High steel corrosion risk is mapped across 54%, so the line owner should consider casing and tracer wire protection; HDPE does not share that soil corrosion concern. The geologic map names the Lutetian age El Pico Clay, a clay, silty clay, sandstone and coal unit, so deeper conditions still matter to the bore plan.

What does it take to bore Big Wells clay loam?

Big Wells has clay loam and sandy clay loam mapped below the surface. We plan the reaming and fluid for that mix, then keep the bore path controlled near FM 1867 and the city streets.

  1. For Pryor sandy clay loam, we use staged reaming and adjust drilling fluid so sticky cuttings do not build up around the reamer.
  2. Where the Big Wells survey maps clay loam at about 40 inches, we watch fluid returns and keep pressure controlled near pavement on Commerce Street.
  3. Before a bore near the City of Big Wells water lines, we hydrovac each marked utility on the path because surface marks do not show depth.
  4. Along FM 1867, we track the drill head from the surface and log depth and pitch as the bore advances.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Big Wells near FM 1867?

FM 1867 has 0.9 mapped roadway miles inside Big Wells, and Texas State Highway 85 has 0.6. A route crossing either state highway needs to be planned as a highway crossing, not as an ordinary city street bore. The longest named streets include Commerce Street at 0.89 miles, Travis Street at 0.88 and Crockett at 0.87. A bore can pass beneath pavement rather than cut across these streets, subject to the road owner’s approval and any needed highway permit.

CrossingTypeMapped extentWho has a say
FM 1867State highway0.9 roadway miles insideState highway office
Texas State Highway 85State highway0.6 roadway miles insideState highway office
Galvaneño CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Arroyo NegroStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Big Wells or within one mile outside its limits, so there is no mapped track crossing to plan around. Galvaneño Creek is 0.8 miles from the city limits and Arroyo Negro is 0.9 miles away; neither stream is mapped inside the city. No street crossings of named streams are mapped in the city, and no lakes or ponds are mapped within one mile. A route toward either creek still needs its own site review.

Who has to sign off on a Big Wells bore in Dimmit County?

Big Wells is incorporated, so its city streets, including Commerce Street and Crockett, belong to the city. Work in the right of way of FM 1867 or Texas State Highway 85 needs a TxDOT utility permit reviewed by the Laredo District. The line owning utility files through RULIS; we prepare the bore plan and profile and work under the permit issued to that utility. For electric or communication crossings, the cover requirement is 60 inches below the lowest crossed grade, or 48 inches along the right of way. Water crossings require 60 inches, and pressurized sewer crossings require 60 inches. Creek work near Galvaneño Creek is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Big Wells water system?

The City of Big Wells public water system draws from groundwater wells and reports 267 service connections serving 870 people. A proposed water bore along Commerce Street may connect to existing system lines, so we expose marked utilities before drilling near them. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Dimmit County. The electric provider for a specific address is confirmed with the line owner before planning a conduit bore near FM 1867.

Line ownerWhat it isSourceSize
City of Big WellsPublic water systemGroundwater wells267 connections, 870 people served
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric CooperativeElectric utilities reporting service in Dimmit CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Big Wells a median housing year of 1983. About 20% of homes date from before 1960, and 18% were built in 2000 or later. That age range can mean a Travis Street project replaces older buried pipe, while a newer connection may need a service route. We hydrovac pothole marked utilities along the proposed path, including water or electric lines, because locate marks show position but not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Big Wells in relation to Asherton and nearby towns?

Big Wells is in Dimmit County, at an elevation of 522 feet, and covers 0.55 square miles. Its ZIP code is 78830. Brundage is 6.1 miles west, Asherton is 14.4 miles southwest and Catarina is 15.4 miles south. Crystal City, the nearest larger city, is 17.7 miles northwest; Carrizo Springs, the county seat, is 17.8 miles west. Our Yukon, Oklahoma yard is 576 road miles away, a drive of 11.3 hours. Those distances affect how we plan mobilization for work on FM 1867 or a city street.

Places near Big Wells

What kinds of bores come up in Big Wells near Galvaneño Creek?

  • Highway crossing: A bore beneath FM 1867 can keep the pavement intact while the utility route passes under the highway.
  • Water service: A connection near Commerce Street can be planned around the City of Big Wells groundwater system and its existing lines.
  • Electric conduit: Along Travis Street, we confirm the address specific electric line owner before setting the conduit route.
  • Creek crossing: A route near Galvaneño Creek needs planning for the channel and a check of federal water jurisdiction.
  • Street replacement: A bore along Crockett can replace a buried line without opening a trench across the street surface.
  • Fiber route: A fiber bore near Texas State Highway 85 can be laid out to avoid cutting the highway pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring in Big Wells near Franklin?

For a proposed bore near Franklin, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the route meets Commerce Street, nearby utilities and the intended connection. That detail lets us judge the ground and access before building the quote.

Soil is a leading cost factor in Big Wells because sticky clay at about 40 inches can take staged reaming and careful fluid control. Next come bore length, pipe or conduit size, and the number of utilities to expose along streets such as Franklin. Pavement or concrete, pits and excavator time also affect the scope. A route near Galvaneño Creek adds crossing planning, while mobilization from Yukon matters at 576 road miles. Emergency work can change the schedule and setup.

Questions people ask about boring in Big Wells

Does Trinity take directional boring jobs in Big Wells and Dimmit County, and who staffs them?

Yes. Trinity takes directional boring work in Big Wells, with our own crews and partner contractors from satellite yards that Trinity has vetted. We stay your point of contact from the first call through the bore log. A route along Commerce Street or FM 1867 is planned around its specific soil, utilities and access.

Can you bore a line under Galvaneño Creek near Big Wells?

A creek crossing can be considered, but the route and ground need review first. Galvaneño Creek is 0.8 miles from Big Wells city limits, not inside the city. We check whether the proposed crossing involves federal water jurisdiction and plan the bore depth around the channel before setting a method.

Who runs the Big Wells public water system, and where does its water come from?

The City of Big Wells owns and runs the public water system, which uses groundwater wells. It reports 267 service connections serving 870 people. For a proposed service near Commerce Street, marked water lines on the bore path are exposed before the drill approaches.

Which electric companies report service in Big Wells and Dimmit County, and who confirms conduit specs?

AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Dimmit County. That does not identify the provider at every address. Before a conduit bore near FM 1867, the line owner for the specific route needs to confirm the applicable conduit requirements.

Who controls Crockett in Big Wells, and does a bore require cutting the street?

Big Wells is incorporated, so the city owns its city streets, including Crockett. Directional boring can place a line beneath the street without an open cut, subject to the city’s approval for work in its street right of way. FM 1867 is a state highway and follows a separate TxDOT permit process.

Are homes and buried lines near Travis Street in Big Wells old enough to affect replacement bores?

They may be. The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1983, with 20% of homes built before 1960. A replacement bore near Travis Street should account for existing utilities, which we expose by hydrovac before drilling near them.

Can I reach Trinity after hours about an urgent bore on Crockett in Big Wells?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work, including a request near Crockett. The bore still needs a route review, utility information and access details before work can be planned. FM 1867 work may also need a TxDOT utility permit.

How much notice does Texas811 need for a Big Wells bore on Commerce Street, and what about the marks?

For Commerce Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring in Big Wells under FM 1867?

The job scope sets the price: length, pipe or conduit size, soil, utility crossings, pavement, creek work, pits and mobilization all matter. Clay loam mapped at about 40 inches can affect reaming, and a highway crossing under FM 1867 adds permit and installation planning. The 576 road miles from Yukon also affect mobilization.

Where the Big Wells facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Big Wells

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Big Wells, Texas

Type the address of your job in Big Wells. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Big Wells

Same county: Carrizo Springs. All counties: Texas county list.