Carrizo Springs Texas Directional Boring: Antosa Soil, Carrizo Creek and US 83
Quick Answer: Carrizo Springs is an incorporated city, so its streets, including 9th Street, belong to the city; we take directional boring, also called horizontal directional drilling (HDD), for crossings such as Carrizo Creek. Our Yukon, Oklahoma main office is 594 road miles from US 83 in Carrizo Springs, so mobilization is part of planning. The USDA soil survey maps sandy clay loam below much of the city, which can hold a bore open and grip the pipe. Carrizo Hill, 2.2 miles southeast, is among the nearby places we serve.
Carrizo Springs bores at a glance
- County seat of Dimmit County, Texas. Population 4,586 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 594 miles, about 11.7 hours of driving.
- Ground: Antosa soil is mapped on 19 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 27 percent of the area.
- Highways inside the boundary: US 83, US 277, FM 790, Loop 225 and Texas State Highway 85. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Carrizo Creek.
- Public water: City of Carrizo Springs, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Carrizo Springs and Dimmit County?
Carrizo Springs is an incorporated city, so its city streets belong to the city itself. The Census Bureau Vintage 2024 estimate puts the population at 4,586 in Dimmit County. We install water, sewer, gas, electric conduit and fiber; a bore could carry a water line along 5th Street or fiber conduit near US 277 without opening the road surface.
Our main office is in Yukon, Oklahoma, and Carrizo Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line to 48 inch casing, the range fits a short service near 13th Street or a long utility route across Carrizo Springs. The family business began in 1965 and has done directional boring since 1982; our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma.

What is Antosa soil like to bore in Carrizo Springs?
The USDA soil survey maps the Antosa Bobillo association across 19% of Carrizo Springs, with Brystal fine sandy loam mapped across another 19%. At the surface, fine sandy loam covers 58% of the mapped area, while fine sand covers 19%. About 40 inches below the surface, sandy clay loam is mapped under 68% of the city and cemented material under 26%. The survey also reports an average clay content of 27% at that depth. These are mapped soil patterns, not test borings; a route near Carrizo Creek still needs site specific planning.
| USDA soil survey, inside the Carrizo Springs city limits | What is mapped |
|---|---|
| Soil series mapped | Antosa 19 percent, Brystal 19 percent, Tonio 17 percent, Randado 16 percent and Olmos 9 percent |
| Texture at the surface | fine sandy loam 58 percent, fine sand 19 percent and very cobbly loam 9 percent |
| Texture about 40 inches down | sandy clay loam 68 percent, cemented material 26 percent and clay loam 4 percent |
| Engineering class about 40 inches down | clayey sand (SC) 43 percent and lean clay (CL) 30 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 27 percent of the area (0 percent hard rock, 27 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 6 percent of the area |
Weathered bedrock is mapped within 60 inches across 27% of Carrizo Springs, while hard bedrock is not mapped there; bedrock within 40 inches is mapped across 2%. The USDA soil survey maps no seasonal water table within 60 inches, but flood prone soils cover 5%, so a Carrizo Creek crossing needs attention to channel depth. High steel corrosion risk is mapped across 6%, a concern for uncoated steel casing or tracer wire. The Bigford Formation, an Eocene unit of clay, sandstone, shale and lignite, adds variation that the bore plan must account for.
What does it take to bore sandy clay loam in Carrizo Springs?
Carrizo Springs soil maps show sandy clay loam below the surface and some cemented material. We use the planned route, utility locations and bore returns to adjust the drilling approach near streets such as 9th Street.
- With sandy clay loam mapped below much of Carrizo Springs, we tune the drilling fluid and ream in stages so clay does not build up on the cutting tools.
- Where fine sand or sandy soil is mapped near a route on 5th Street, staged reaming and drilling fluid help support the hole until the pipe is ready.
- The Bigford Formation includes sandstone and shale, and weathered bedrock is mapped within 60 inches across 27% of the city; we allow for slower drilling where it occurs.
- Before a bore approaches a marked utility near Carrizo Creek or 9th Street, we expose it with hydrovac potholing, then track and log the drill head.

What does a bore have to cross in Carrizo Springs near Carrizo Creek?
US 83 and US 277 run through Carrizo Springs, along with FM 790, Loop 225 and Texas State Highway 85. A utility crossing at US 83 needs a bore plan that keeps the road surface intact and meets the permit conditions. Among the named streets, 9th Street is the longest at 1.96 miles in the city; 5th Street runs 1.6 miles and Nopal Street 1.38 miles. A route on 13th Street, which runs 1.26 miles, also needs utility locations checked before drilling.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | US highway | 1.8 roadway miles inside | State highway office |
| US 277 | US highway | 1.2 roadway miles inside | State highway office |
| FM 790 | State highway | 1.5 roadway miles inside | State highway office |
| Loop 225 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 85 | State highway | 0.9 roadway miles inside | State highway office |
| FM 186 | State highway | 0.6 roadway miles inside | State highway office |
| Loop 517 | State highway | 0.3 roadway miles inside | State highway office |
| FM 1917 | State highway | 0.2 roadway miles inside | State highway office |
| FM 1407 | State highway | 0.1 roadway miles inside | State highway office |
| Carrizo Creek | Stream | 1.98 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Penitas Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Peñitas Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Carrizo Springs or within one mile outside the city, so no mapped track crossing is indicated. Carrizo Creek runs 1.98 channel miles through the city, with four mapped street crossings. A proposed bore near the creek needs a route that stays beneath the channel and an early check for U.S. Army Corps of Engineers jurisdiction. No lakes or ponds are mapped within one mile, so they do not add a crossing to the local route plan.
Who approves a bore under US 83 in Carrizo Springs?
The line owner, not our drilling crew, applies for a utility permit through TxDOT’s online RULIS system when work uses the right of way on US 83, US 277 or another state highway in Carrizo Springs. TxDOT’s Laredo District reviews the application. We give the owner the bore plan and profile and work under the permit issued to that utility. For electric or communication lines crossing a highway, the rule calls for at least 60 inches of cover; water lines need 60 inches, and pressurized sewer lines need 60 inches at crossings. TxDOT requires boring or tunneling beneath existing highway pavement.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines beneath Carrizo Springs streets in Dimmit County?
The City of Carrizo Springs public water system serves 5,830 people through 2,111 service connections and draws from groundwater wells. For an electric conduit bore near US 83, the line owner must be confirmed before the route is set. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Dimmit County; that does not establish which provider serves a particular address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Carrizo Springs | Public water system | Groundwater wells | 2,111 connections, 5,830 people served |
| AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative | Electric utilities reporting service in Dimmit County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1976: 25% of homes were built before 1960, 55% from 1960 to 1999 and 20% in 2000 or later. A replacement line near 9th Street may need to pass existing utilities, while a newer service may follow a different route. We hydrovac pothole every marked utility on the bore path before drilling near it; paint shows location, not depth. That means a proposed line beneath 9th Street gets exposed before the drill approaches it.

How far is Carrizo Springs from Carrizo Hill and our Yukon office?
Carrizo Springs is the Dimmit County seat, covers 3.09 square miles and sits at an elevation of 587 feet. Its ZIP code is 78834. Carrizo Hill is 2.2 miles southeast, Asherton is 8.2 miles southeast, and Chula Vista is 9.8 miles north. Crystal City is 11.6 miles north. Eidson Road, the nearest larger city listed, is 39.1 miles west. The Yukon, Oklahoma yard is 594 road miles away, or about 11.7 hours by car, so mobilization matters for a project along US 83.
Places near Carrizo Springs
- Directional boring in Carrizo Hill: 2.2 miles southeast
- Directional boring in Asherton: 8.2 miles southeast
- Directional boring in Chula Vista: 9.8 miles north
- Directional boring in Crystal City: 11.6 miles north
- Directional boring in Brundage: 12 miles east
- Directional boring in Eidson Road: 39.1 miles west
Which jobs call for a bore in Carrizo Springs near 9th Street?
- Highway crossing: A bore beneath US 83 can carry water or conduit while keeping the existing pavement uncut, subject to TxDOT permit conditions.
- Water service: A service near the City of Carrizo Springs water system can connect along 5th Street without opening the full street.
- Fiber conduit: A fiber route beside 9th Street can use a bore to pass beneath the road surface and marked utilities.
- Creek crossing: A Carrizo Creek bore needs a planned path beneath the channel and a check for federal jurisdiction during planning.
- Electric conduit: A conduit route near US 277 needs the line owner identified before the bore and permit approach are set.
- Sewer line: A pressurized sewer crossing at US 83 needs the highway cover and utility permit addressed in the plan.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Carrizo Springs work near 13th Street?
For a proposed bore near 13th Street, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. The route matters because Carrizo Springs has both US 83 and Carrizo Creek crossings, and their locations change the work to plan.
The price reflects the actual scope. Antosa soil and cemented material affect the ground work; a crossing at US 83 or Carrizo Creek adds planning for the route and surface. The number of utilities to expose, pavement or concrete, pits, excavator time and sand backfill also affect the job. Carrizo Springs is 594 road miles from Yukon, so mobilization is part of the estimate. High profile or emergency work changes the requirements too.
Questions people ask about boring in Carrizo Springs
Does Trinity take directional boring work in Carrizo Springs and Dimmit County?
Yes. We take directional boring work in Carrizo Springs, with our own crews and partner drilling contractors Trinity has vetted operating from satellite yards. Our Yukon, Oklahoma office handles the work, including a possible bore beneath US 83 or along a city street. We stay involved from the first call through the bore log.
What ground does a bore pass through in Carrizo Springs around Antosa soil?
The USDA soil survey maps Antosa Bobillo association across 19% of Carrizo Springs. At about 40 inches below the surface, sandy clay loam is mapped under 68% of the city, and cemented material under 26%. The mapped soil is not a test of a particular route, so a bore near Carrizo Creek still needs site specific planning.
Will a bore in Carrizo Springs encounter rock?
It may. Weathered bedrock is mapped within five feet across 27% of Carrizo Springs, while hard bedrock is not mapped within that depth. The Bigford Formation includes sandstone and shale. Those maps help set expectations, but the conditions along a proposed route on 13th Street can vary.
Who approves a Carrizo Springs bore beneath US 83?
The utility line owner files the TxDOT utility permit in the online RULIS system; the driller does not file it. TxDOT’s Laredo District reviews work on US 83 in Dimmit County. We provide the bore plan and profile, then work under the permit issued to the owner.
Can a line be bored beneath Carrizo Creek in Carrizo Springs?
A bore can be planned beneath Carrizo Creek, which has 1.98 channel miles inside Carrizo Springs. The route needs to stay beneath the channel, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. A site review determines the practical path and drilling approach.
Who runs the water system in Carrizo Springs and where does its water come from?
The City of Carrizo Springs runs the public water system, which uses groundwater wells. It serves 5,830 people through 2,111 service connections. That existing network matters when planning a new water service near 9th Street because marked utilities along the bore path must be exposed before drilling approaches.
What bore sizes and lengths can Trinity handle for a job near 13th Street in Carrizo Springs?
We handle bores from 3/4 inch service lines up to 48 inch casing, and lengths from 10 feet to 5,000 feet. That range can fit a short service near 13th Street or a longer route across Carrizo Springs. The proposed line, ground and crossings determine the suitable setup.
How much notice does Texas811 need for a bore near 9th Street in Carrizo Springs?
Request a Texas811 locate at least 48 hours, or two working days, before excavation, excluding Saturdays, Sundays and legal holidays; request it no earlier than 14 days before. If work near 9th Street slips more than 14 days past the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near US 83 in Carrizo Springs?
The route, pipe or conduit size, footage, soil and rock, utility crossings, pavement, creek crossings, pits and excavator time all affect the price. Near US 83, permit and cover conditions can shape the plan; Carrizo Creek adds crossing considerations. Mobilization also matters because the Yukon office is 594 road miles from Carrizo Springs.
Where the Carrizo Springs facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Carrizo Springs
- U.S. Census Bureau, TIGER/Line 2024: Carrizo Springs boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Carrizo Springs
- U.S. Census Bureau, American Community Survey 2019 to 2023: Carrizo Springs housing units and year built
- Macrostrat geologic map compilation: map units under Carrizo Springs
- U.S. EPA Safe Drinking Water Information System: public water systems serving Carrizo Springs
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dimmit County
- U.S. Geological Survey, Elevation Point Query Service: Carrizo Springs elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Carrizo Springs
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Carrizo Springs
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Carrizo Springs, Texas
Type the address of your job in Carrizo Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Carrizo Springs
Same county: Big Wells · Catarina. All counties: Texas county list.
