Brundage Texas Directional Boring: Tonio Soil, Texas State Highway 85 and Tortuga Creek
Quick Answer: Texas State Highway 85 is a key route here, and Trinity Boring Solutions takes directional boring work in Brundage, Texas, also called horizontal directional drilling (HDD), to get lines beneath roads without cutting the pavement. The Yukon, Oklahoma main office is 582 road miles away, so a bore near Brundange Steak House Road affects mobilization planning. Tonio soil covers 49 percent of the mapped area, while clay is mapped at about 40 inches across 50 percent. That clay can cling to the reamer and grip pipe, so we plan fluid and reaming for the ground.
Brundage bores at a glance
- Unincorporated community in Dimmit County, Texas. Population 12 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 582 miles, about 11.4 hours of driving.
- Ground: Tonio soil is mapped on 49 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 50 percent of the area.
- Highways inside the boundary: Texas State Highway 85 and FM 65. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring under Brundange Steak House Road in Brundage?
Brundage is an unincorporated community in Dimmit County, with a 2020 Census count of 12 people. For a line beneath Brundange Steak House Road or Texas State Highway 85, we install water, sewer, gas, electric conduit and fiber by directional boring. The route and line type set the bore plan, especially where pavement or other buried utilities are involved.
Our main office is in Yukon, Oklahoma, and Brundage work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet under the Arkansas River in Tulsa, proof of the reach available for long crossings. A typical Brundage job is smaller, but Tonio soil and a route under Texas State Highway 85 still shape the plan. We have done directional boring since 1982.

What does the Tonio soil survey show about ground in Brundage?
The USDA soil survey maps Tonio fine sandy loam across 49 percent of Brundage, with Bookout clay loam also common. At about 40 inches below the surface, clay is mapped under 50 percent of the area and sandy clay loam under 49 percent. The mapped average clay content at that depth is 36 percent. Tonio, Bookout, and Pryor are mapped soil patterns, not test borings, so we plan field verification before boring. The clay can stick to the reamer and swell against pipe, while the sandy clay loam may behave differently along the same route.
| USDA soil survey, inside the Brundage mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Tonio 49 percent, Bookout 42 percent and Pryor 7 percent |
| Texture at the surface | fine sandy loam 50 percent, clay loam 42 percent and sandy clay loam 7 percent |
| Texture about 40 inches down | clay 50 percent and sandy clay loam 49 percent |
| Engineering class about 40 inches down | lean clay (CL) 99 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | 50 percent of the area (0 percent hard rock, 50 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 50 percent of the area |
The soil survey maps bedrock within 60 inches across 50 percent of Brundage, all of it weathered, and hard bedrock is not mapped at that depth. The El Pico Clay geologic unit, of Lutetian age, includes clay, silty clay, sandstone and coal, so a route may meet changing material. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 1 percent. Along Texas State Highway 85, high steel corrosion risk is mapped across 50 percent, so we advise the line owner to consider casing and tracer wire materials.
What does it take to bore Brundage clay?
Tonio soil and clay mapped at about 40 inches call for a controlled bore, not a one pass pull. We track the drill head and adjust the fluid and reaming plan to the material along each Brundage route.
- At Texas State Highway 85, we plan the bore beneath the pavement and set the entry and exit pits outside the travel lanes where the route allows.
- Where Tonio soil turns sticky with depth, we use thinner drilling fluid and polymer, ream in stages, and have the pipe ready for the pull.
- With clay mapped at about 40 inches across 50 percent of Brundage, we watch fluid returns and keep pressure controlled near pavement.
- If a route approaches weathered bedrock mapped within 60 inches, we slow down and track the head closely through the soil to rock change.

Where does a line have to go under Brundange Steak House Road in Brundage?
Texas State Highway 85 and FM 65 run inside the mapped community boundary. Their rights of way need a different plan from a short neighborhood bore, and existing highway pavement is crossed by boring or tunneling. Brundange Steak House Road is the longest named street at 0.39 miles, followed by Elm Street at 0.28 miles and Tortuga Road at 0.21 miles. A route beneath any of these streets needs an accurate alignment and utility exposures before the drill approaches marked lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 85 | State highway | 1 roadway miles inside | State highway office |
| FM 65 | State highway | 0.8 roadway miles inside | State highway office |
| Tortuga Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Brundage boundary or within 1 mile outside it, and none of the mapped street and rail crossings are present. No stream runs inside the boundary, but Tortuga Creek runs along or touches it. A proposed bore near the creek needs a channel specific plan, with U.S. Army Corps of Engineers jurisdiction checked during planning. Near Elm Street, no lakes or ponds are mapped within 1 mile, which informs our review of the bore route.
Who approves a Brundage bore in Dimmit County?
Brundage has no city government because it is an unincorporated community, so street authority rests with Dimmit County or the state, depending on the road. For work in the Texas State Highway 85 or FM 65 right of way, the utility owner, not the drilling contractor, files the utility permit in TxDOT’s online RULIS system. The TxDOT Laredo District reviews it. We give the line owner the bore plan and profile, then work under that permit. TxDOT cover rules include 60 inches for electric or communication lines at highway crossings, with the district able to set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines serving Brundage in Dimmit County?
Public records do not tie a named water system to Brundage, so the water provider for a specific address has to be confirmed with the county, the local water district or the appropriate local office before a bore is planned. For electric service in Dimmit County, AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report service. We confirm the line owner before planning an electric conduit bore near Brundange Steak House Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative | Electric utilities reporting service in Dimmit County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as Brundage, so the exact age of buried services cannot be assumed. With 4.19 public road miles in the mapped community, a new service may need a long run along Texas State Highway 85, FM 65 or a named street. September averages 3.3 inches of rain, the wettest month listed for Dimmit County, which can affect access. We hydrovac pothole every marked utility on the route; for example, a proposed bore under Brundange Steak House Road needs marked lines exposed before drilling near them.

Where is Brundage in relation to Crystal City?
Brundage is in Dimmit County, at an elevation of 533 feet, and its mapped community covers 0.61 square miles. Its ZIP code is 78834. Big Wells is 6.1 miles east, Chula Vista is 10.1 miles northwest, and Asherton is 10.4 miles southwest. Carrizo Springs, the county seat, is 12.0 miles west; Crystal City, the nearest larger city, is 12.5 miles northwest. The Yukon, Oklahoma yard is 582 road miles away, a drive of 11.4 hours, so distance matters when planning mobilization for Brundage work.
Places near Brundage
- Directional boring in Big Wells: 6.1 miles east
- Chula Vista: 10.1 miles northwest
- Directional boring in Asherton: 10.4 miles southwest
- Directional boring in Carrizo Hill: 10.9 miles southwest
- Directional boring in Carrizo Springs: 12 miles west
- Directional boring in Crystal City: 12.5 miles northwest
What kinds of bores come up near Tortuga Creek in Brundage?
- Highway crossing: A bore beneath Texas State Highway 85 needs a route and cover plan suited to the highway right of way.
- Street service: Water or sewer beneath Brundange Steak House Road can avoid an open cut across the street when access and ground allow.
- Fiber route: Conduit along Elm Street can be planned around marked utilities and the clay mapped at about 40 inches.
- Creek crossing: A proposed route near Tortuga Creek needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: A route near FM 65 needs the line owner confirmed before conduit size and crossing details are set.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore under Texas State Highway 85 in Brundage?
Start with a map pin or address, since a pin near Texas State Highway 85 is different from one near Tortuga Creek or Brundange Steak House Road. For a crossing on FM 65, we need the material going underground, pipe or conduit size, and footage to plan the bore. A sketch or plans help us place the pits and see the route.
The Brundage price follows the actual scope. Tonio soil and clay mapped at about 40 inches matter first because they affect drilling and reaming. Next are the length, pipe or conduit size, and utilities to expose, especially along Texas State Highway 85. Pavement, creek crossings near Tortuga Creek, pits, excavator time and sand backfill also affect the work. Mobilization from Yukon matters at 582 road miles, and high profile or emergency work can add planning needs.
Questions people ask about boring in Brundage
Does Trinity take Brundage directional boring jobs in Dimmit County, and who staffs them?
Yes. Trinity takes directional boring work in Brundage, and the work is handled by our own crews or crews from partner drilling contractors we have vetted. We remain your contact from the first call through the bore log. A route under Texas State Highway 85 or along Brundange Steak House Road helps define the job.
What ground should I expect for a Brundage bore near Tonio soil?
The USDA soil survey maps Tonio fine sandy loam across 49 percent of Brundage. At about 40 inches, clay is mapped under 50 percent and sandy clay loam under 49 percent. Sticky clay can build on a reamer or grip pipe, so the actual route and drilling plan matter.
Is there rock on a Brundage bore route?
Weathered bedrock is mapped within 60 inches across 50 percent of Brundage, while hard bedrock is not mapped in that depth range. The El Pico Clay geologic unit includes sandstone as well as clay. A route near FM 65 still needs to be planned for a possible change in material.
Who approves a bore beneath Texas State Highway 85 in Brundage?
For work in the Texas State Highway 85 right of way, the line owner submits the utility permit through TxDOT’s RULIS system. The TxDOT Laredo District reviews the application. We provide the bore plan and profile to the utility owner and work under its permit.
Can a line be bored under Tortuga Creek near Brundage?
A creek crossing can be considered, but Tortuga Creek runs along or touches the mapped Brundage boundary, so the route needs a specific channel plan. When we plan a crossing near Tortuga Creek, we check for US Army Corps of Engineers jurisdiction. Site conditions and access determine the bore approach.
Who owns electric lines in Brundage, Dimmit County, and who confirms conduit specs?
AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Dimmit County; that does not identify the line owner at every Brundage address. The utility that owns the specific line confirms conduit requirements before a bore is planned, including a route near FM 65.
How far is Brundage from Trinity’s Yukon office, and does Crystal City change the job?
Brundage is 582 road miles and 11.4 drive hours from our Yukon, Oklahoma main office. Crystal City is 12.5 miles northwest of Brundage, but it does not change the route or scope at the jobsite. The distance from Yukon can affect mobilization planning.
How much 811 notice is needed for a Brundage bore near Brundange Steak House Road?
Texas811 needs the locate request at least 48 hours before excavation starts, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Marks near Brundange Steak House Road that wear off or move must be refreshed through Texas811 before work continues.
What affects the cost of a Brundage bore beneath Texas State Highway 85?
The job scope sets the price, not a single standard rate. Clay in Brundage, bore length, line size, utilities to expose, pavement and the Texas State Highway 85 crossing all affect the work. Pits, equipment time, backfill and mobilization from Yukon also matter, especially for a longer or urgent job.
Where the Brundage facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Brundage
- U.S. Census Bureau, TIGER/Line 2024: Brundage boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Brundage population count
- Macrostrat geologic map compilation: map units under Brundage
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dimmit County
- U.S. Geological Survey, Elevation Point Query Service: Brundage elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Brundage
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Brundage
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Brundage, Texas
Type the address of your job in Brundage. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Brundage
Same county: Catarina. All counties: Texas county list.
