trinityboringsolutions.com

Bryson Texas Directional Boring: Truce Soil, US 380 and Carmichael Creek

Quick Answer: Dempsey Street, York Street and Depot Street are among Bryson’s longest routes, and US 380 is a road a bore may need to pass beneath. Across 16.63 public road miles, Carmichael Creek also presents a mapped crossing to plan around. Bryson is 199 road miles from our Yukon, Oklahoma main office, with US 380 and FM 1191 shaping possible routes. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines beneath US 380; clay mapped below Truce soil can cling to tooling, so the drilling plan must manage fluid and reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bryson bores at a glance

  • Incorporated city in Jack County, Texas. Population 469 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 199 miles, about 4.3 hours of driving.
  • Ground: Truce soil is mapped on 28 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 64 percent of the area.
  • Highways inside the boundary: US 380, FM 1191 and FM 3209. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Carmichael Creek.
  • Public water: City of Bryson, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Dempsey Street in Bryson?

Bryson is an incorporated city in Jack County, where the Census Bureau Vintage 2024 estimate puts the population at 469. On Dempsey Street or along a route near US 380, we install water, sewer, gas, electric conduit and fiber by directional boring, planning the path around marked utilities and pavement.

Our main office is in Yukon, Oklahoma, and Bryson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Bryson, our range runs from a 3/4 inch service line near College Avenue to 48 inch casing beneath US 380, with bore lengths from 10 feet to 5,000 feet. Our family business began in 1965, and since 1982 we have done directional boring, planning for route work near FM 1191 in Bryson.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Truce soil like to bore in Bryson?

The USDA soil survey maps Truce fine sandy loam across 28 percent of Bryson, Bluegrove loam across 24 percent and Thurber clay loam across 18 percent. At about 40 inches below the surface, clay is mapped across 54 percent and silty clay across 6 percent; the average clay content there is 42 percent. Truce and Bluegrove soil patterns are mapped references, not test borings, so we check site conditions before planning a bore. Clay can stay around the tooling and swell against pipe, so the route and drilling fluid need to account for it.

USDA soil survey, inside the Bryson city limitsWhat is mapped
Soil series mappedTruce 28 percent, Bluegrove 24 percent, Thurber 18 percent, Shatruce 8 percent and Hassee 3 percent
Texture at the surfacefine sandy loam 31 percent, loam 28 percent and clay loam 18 percent
Texture about 40 inches downclay 54 percent, bedrock 29 percent and silty clay 6 percent
Engineering class about 40 inches downlean clay (CL) 41 percent and fat clay (CH) 22 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inches64 percent of the area (5 percent hard rock, 59 percent weathered rock)
Seasonal water table within 60 inches3 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel85 percent of the area

The USDA soil survey maps bedrock within 60 inches across 64 percent of Bryson, including weathered bedrock across 59 percent and hard bedrock across 5 percent. Seasonal water table is mapped within 60 inches across 3 percent, while flood prone soils cover 1 percent. High steel corrosion risk is mapped across 85 percent, a concern for uncoated steel casing and tracer wire. The geologic map names the Thrifty and Graham formations, undivided, of Gzhelian age; mapped shale and sandstone can slow drilling where the route meets rock.

How do we bore through clay in Bryson?

Truce fine sandy loam is common near the surface, while the USDA soil survey maps clay at about 40 inches across much of Bryson. We plan fluid, reaming and pipe handling for that change along routes such as York Street.

  1. Truce fine sandy loam is common at the surface, but clay at about 40 inches can cling to tooling; we use a thinner fluid with polymer and ream in stages.
  2. With an average 42 percent clay mapped at 40 inches in Bryson, we watch fluid returns and keep pressure controlled so it does not lift pavement near US 380.
  3. Bedrock is mapped within 60 inches across 64 percent of Bryson, so we track the drill head from the surface and log depth and pitch along routes near York Street.
  4. Before drilling near any marked utility on a Bryson bore path, we hydrovac expose it; for example, each marked line on a route beneath Dempsey Street must be exposed first.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a bore pass under US 380 in Bryson?

US 380, FM 1191 and FM 3209 run within Bryson, with mapped roadway mileage of 1.9 miles, 1.5 miles and 0.1 miles respectively. No state highway is listed just outside the limits within 1.5 miles. Dempsey Street is the longest named street at 2.06 miles, followed by York Street at 0.94 miles and Depot Street at 0.9 miles. A route beneath one of these roads needs to be planned around pavement, access and the lines already in the ground.

CrossingTypeMapped extentWho has a say
US 380US highway1.9 roadway miles insideState highway office
FM 1191State highway1.5 roadway miles insideState highway office
FM 3209State highway0.1 roadway miles insideState highway office
Carmichael CreekStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
East Rock CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Board Tree CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
West Rock CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Bryson LakeLake or pond63 acres, insideChecked for Corps of Engineers jurisdiction
McCloud LakeLake or pond31 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Bryson or within one mile outside its limits, and none of the city’s street and rail crossings is mapped. Carmichael Creek runs 1.18 channel miles within the city, and three mapped street crossings of named streams make creek and drainage routes a planning concern. Bryson Lake, at 63 acres, is inside the limits; McCloud Lake, at 31 acres, is outside. A lake or creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who permits a bore on US 380 in Jack County near Bryson?

Dempsey Street and other local streets in incorporated Bryson belong to the city. Work in the right of way of US 380, FM 1191 or FM 3209 needs a TxDOT utility permit; the line owner files through RULIS, and the TxDOT Fort Worth District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with crossings extending below all travel lanes on rural highways. A proposed Carmichael Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are near the City of Bryson water system?

The City of Bryson public water system serves 469 people through 240 service connections using purchased surface water. Those records identify the system, not the location of each buried line along Dempsey Street or US 380. Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and Wise Electric Cooperative report electric service in Jack County; we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of BrysonPublic water systemSurface water bought from another system240 connections, 469 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Jack CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 survey puts Bryson’s median housing year at 1982; we still check site conditions before any Dempsey Street bore. Bryson’s survey estimates 18 percent of homes before 1960, 68 percent from 1960 to 1999, and 14 percent in 2000 or later; we assess each bore route on site. That mix can mean a project on College Avenue is replacing older pipe or adding a service to newer construction, so the planned route and existing utilities both matter.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Is Graham one of the nearby places around Bryson in our service area?

Bryson is an incorporated city in Jack County, at an elevation of 1,311 feet and covering 1.32 square miles. Its ZIP code is 76427. Loving is 10.0 miles northwest, Graham is 11.8 miles west and Jacksboro, the county seat, is 13.9 miles east; Graford is 17.8 miles southeast. Graham is the nearest larger city. From our Yukon, Oklahoma main office, Bryson is 199 road miles away, a 4.3 hour drive, so distance is part of planning work on US 380 and nearby rural routes.

Places near Bryson

What would we bore near York Street in Bryson?

  • Highway crossing: A route beneath US 380 needs a bore plan for the highway pavement and the utilities marked along the approach.
  • Water service: A connection near the City of Bryson system may need a route beneath Dempsey Street, with the existing water line located first.
  • Fiber conduit: A fiber route along York Street can be planned around pavement and existing marked lines before the bore begins.
  • Creek crossing: A route beneath Carmichael Creek needs depth planning below the channel and a check for federal jurisdiction.
  • Lake route: Work near Bryson Lake calls for a planned bore path around the mapped water area and nearby buried utilities.
  • Rural service: A line extending from Bryson toward Loving can be scoped for its footage, pipe size and the crossings along the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near College Avenue in Bryson?

Start with the Bryson address or a map pin, such as a location on College Avenue. Tell us what will go in the ground, whether it is water or fiber, then give the pipe or conduit size and the footage. A sketch or plans showing the route toward US 380 help us see crossings and access.

The drive from Yukon to Bryson is 199 road miles, so mobilization is part of the project scope. Truce soil and the mapped bedrock can affect drilling time; crossings of US 380 or Carmichael Creek, marked utilities, pavement, pits and excavator time also shape the work. Pipe size, bore length, backfill needs and a high profile or emergency schedule can change the equipment and crew time required.

Questions people ask about boring in Bryson

Does Trinity take directional boring work in Jack County near Bryson, and who staffs it?

Yes. We take directional boring work across Texas, including route planning for streets such as College Avenue in Bryson. Our own crews or crews from satellite yards run by drilling partners we have vetted can handle the site; you work with Trinity from the first call through the bore log. For a route near Dempsey Street, we plan around the specific marked utilities and access.

What ground should I expect in Bryson around Truce soil?

Truce fine sandy loam is mapped across 28 percent of Bryson, and the USDA soil survey maps clay across 54 percent at about 40 inches below the surface. That clay can stick to the reamer and grip pipe. It is a mapped pattern rather than a test boring, so a route near York Street still needs site specific planning.

How much bedrock is mapped within five feet of the surface in Bryson?

The USDA soil survey maps bedrock within 60 inches across 64 percent of Bryson. Weathered bedrock accounts for 59 percent and hard bedrock for 5 percent of the area. The mapped Thrifty and Graham formations, undivided, include shale and sandstone, so a bore near US 380 may slow where its path meets rock.

Who at TxDOT Fort Worth District approves a bore under US 380 in Bryson?

TxDOT reviews a utility owner’s permit application for work in the US 380 right of way through the TxDOT Fort Worth District, which serves Jack County. The line owner files through RULIS, and we prepare the bore plan and profile for that application. A crossing beneath highway pavement is planned as a bore or tunnel.

Can a line be bored beneath Carmichael Creek in Bryson?

A bore beneath Carmichael Creek can be considered, but the route and depth need to suit the channel. The creek runs 1.18 channel miles within Bryson, and its crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped stream crossings make the specific street and approach important to the plan.

Who runs Bryson’s public water system, and is its source purchased surface water?

The City of Bryson owns its public water system and uses purchased surface water; we plan nearby bores with Carmichael Creek in mind. Public records list 240 service connections serving 469 people. Those figures describe the system, not the location of each buried pipe, so a bore near Dempsey Street still needs its route planned around the marked utilities.

Does Trinity cover Loving and rural sites outside Bryson?

Yes. We take work across Texas, including Bryson, nearby Loving and rural sites outside the city limits. Loving is 10.0 miles northwest of Bryson, and Graham is 11.8 miles west. The address, route length and crossings on a rural job help determine how to plan the work.

How early should I request a Texas811 ticket for a bore on Dempsey Street in Bryson?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as at least two working days. A request cannot be made earlier than 14 days before work. If the start moves more than 14 days past the original notice, request a new ticket, and have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of directional boring under US 380 in Bryson?

The US 380 route length and pipe size matter, along with Truce soil, mapped bedrock, marked utilities, pavement and any creek or drainage crossing. Pit work, excavator time, sand backfill and an emergency schedule can also affect the scope. Bryson’s 199 road miles from Yukon factor into mobilization.

Where the Bryson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bryson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bryson, Texas

Type the address of your job in Bryson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bryson

All counties: Texas county list.