Graford Texas Directional Boring: Leeray Clay, Texas State Highway 254, Pecan Branch
Quick Answer: Lee Avenue, Main Street and Division Street lead Graford’s 14.25 public road miles, while Pecan Branch runs through the city. We use directional boring, also called horizontal directional drilling (HDD), to route lines beneath Texas State Highway 254 and other Graford roads. The Yukon, Oklahoma main office is 228 road miles away, a factor for a bore near Powell Avenue. USDA maps Leeray clay across much of town; sticky clay can load a reamer and grip pipe, so staged passes and fluid control matter.
Graford bores at a glance
- Incorporated city in Palo Pinto County, Texas. Population 729 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 228 miles, about 4.9 hours of driving.
- Ground: Leeray soil is mapped on 50 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: Texas State Highway 254, FM 206, Texas State Highway 337 and FM 4. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Pecan Branch.
- Public water: City of Graford, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Texas State Highway 254 in Graford?
Trinity Boring Solutions handles directional boring in Graford, Palo Pinto County, for utility routes beneath Lee Avenue, Texas State Highway 254 and other constrained corridors. The Census Bureau Vintage 2024 estimate puts Graford at 729, a population figure we consider when planning underground work in Palo Pinto County. We install water, sewer, gas, electric conduit and fiber along streets such as Main Street or toward service connections, with the bore route set to avoid surface cuts where the site allows.
Our main office is in Yukon, Oklahoma, and Graford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since our directional boring work began in 1982, we have built on a family business founded in 1965 for crossings along Main Street. For a route beneath Texas State Highway 254, our capacity runs from 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

What does the Leeray soil survey show about Graford ground?
The USDA soil survey maps Leeray across 50 percent of Graford, with Leeray clay map units covering 31 percent and 18 percent of the city. Clay makes up 58 percent of mapped surface texture, while the survey maps clay at 43 percent and silty clay at 31 percent at about 40 inches below the surface. These are mapped soil patterns, not test results from a particular Lee Avenue lot. Heavy clay can stick to the reamer and tighten around pipe, so the route and drilling fluid need attention.
| USDA soil survey, inside the Graford city limits | What is mapped |
|---|---|
| Soil series mapped | Leeray 50 percent, Hensley 14 percent, Thurber 13 percent, Set 8 percent and Minwells 4 percent |
| Texture at the surface | clay 58 percent, clay loam 16 percent and very stony clay loam 14 percent |
| Texture about 40 inches down | clay 43 percent, silty clay 31 percent and bedrock 14 percent |
| Engineering class about 40 inches down | fat clay (CH) 66 percent, lean clay (CL) 16 percent and silty clayey sand (SC SM) 4 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (14 percent hard rock, 12 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 78 percent of the area |
The USDA survey places bedrock within 60 inches across 26 percent of Graford, with typical bedrock depth at 26 inches; hard bedrock is mapped across 14 percent and weathered bedrock across 12 percent. No seasonal water table is mapped within 60 inches, while flood prone soils cover 4 percent. With high steel corrosion risk mapped across 78 percent, we plan casing and tracer wire around Graford’s clay surface soil. The Wolf Mountain Shale, of Kasimovian age, is mapped here; shale may slow drilling compared with soil.
How do crews bore through Graford clay?
For Graford’s mapped Leeray clay, we manage fluid and reaming so sticky cuttings do not build up on the tool or bind the pipe. Along Main Street, the bore plan also accounts for nearby pavement and marked lines.
- Leeray clay is mapped across much of Graford, so we use thinner drilling fluid with polymer and ream in stages to limit sticky buildup.
- Heavy clay covers 78 percent of the mapped area at about 40 inches, so we watch fluid returns near pavement to avoid pressure lifting a surface.
- With shallow bedrock mapped in parts of Graford, we check depth and pitch as the drill moves from soil toward the Wolf Mountain Shale.
- Before a bore near Lee Avenue, we hydrovac pothole every marked utility on the route and track the drill head from the surface.

What might a new line cross near Lee Avenue in Graford?
Texas State Highway 254, FM 206, Texas State Highway 337 and FM 4 run within Graford’s limits, so a route can involve a state road as well as a city street. Lee Avenue is the longest named street at 1.21 miles in the city; Main Street covers 0.93 miles and Division Street 0.92 miles. A bore can pass below pavement rather than cut across it, with its route and depth planned around the specific street and utility locations.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 254 | State highway | 1.2 roadway miles inside | State highway office |
| FM 206 | State highway | 0.3 roadway miles inside | State highway office |
| Texas State Highway 337 | State highway | 0.2 roadway miles inside | State highway office |
| FM 4 | State highway | 0.2 roadway miles inside | State highway office |
| Pecan Branch | Stream | 0.23 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Fork Keechi Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Keechi Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped within Graford or within 1 mile outside its limits, and none is mapped at a street crossing. Pecan Branch runs 0.23 channel miles inside the city, but no street crossing of a named stream is mapped. West Fork Keechi Creek and Keechi Creek are nearby, and no lakes or ponds are mapped within 1 mile. If a proposed route reaches a creek, the crossing is checked for federal water jurisdiction during planning.
Who approves a Graford bore in Palo Pinto County?
Graford’s city streets are under the city’s control, while work in the right of way of Texas State Highway 254 or another state road needs a TxDOT utility permit. For an electric or communication line crossing Texas State Highway 254, the standard cover is at least 60 inches below the lowest crossed grade; water lines also need 60 inches, and pressurized sewer lines need 60 inches. The utility owner files through TxDOT’s RULIS system, reviewed by the Fort Worth District, and we prepare the bore plan and profile for that filing. Pecan Branch crossings are checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Graford near the City of Graford water system?
The City of Graford public water system uses purchased surface water and lists 347 service connections serving 692 people. Electric service reported in Palo Pinto County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the provider at every Main Street address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Graford | Public water system | Surface water bought from another system | 347 connections, 692 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Palo Pinto County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Graford’s median housing year at 1983; 30 percent of homes were built before 1960, 50 percent from 1960 to 1999, and 20 percent in 2000 or later. A Main Street replacement route may meet older buried lines, while a newer service still needs a clear path. We expose each marked utility on the bore path with hydrovac potholing before drilling near it; for example, we would pothole a marked line under Main Street because paint shows position, not depth.

Where is Graford in relation to Mineral Wells?
Graford is in Palo Pinto County at an elevation of 960 feet and covers 0.72 square miles, with ZIP code 76449. Palo Pinto is 11.8 miles south and Perrin is 12.3 miles northeast; Mineral Wells, the nearest larger city, is 12.6 miles southeast. Palo Pinto is the county seat. From the Yukon, Oklahoma main office, Graford is 228 road miles away and a 4.9 hour drive, which affects mobilization for work near Pecan Branch or Lee Avenue.
Places near Graford
- Directional boring in Palo Pinto: 11.8 miles south
- Directional boring in Perrin: 12.3 miles northeast
- Directional boring in Mineral Wells: 12.6 miles southeast
- Directional boring in Cool: 16.7 miles southeast
- Directional boring in Garner: 17 miles southeast
What boring work comes up near Pecan Branch in Graford?
- Highway crossing: A route beneath Texas State Highway 254 uses a bore profile that accounts for the road surface and required cover.
- Street service: A water or sewer line along Main Street can pass below pavement, with marked utilities exposed before the drill approaches.
- Fiber conduit: A conduit route near Division Street can avoid an open cut across the street when the bore path and access allow.
- Creek crossing: A proposed line beneath Pecan Branch needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
- Water connection: A service near the City of Graford system needs its water line owner confirmed before we plan the bore.
- Long service route: At Powell Avenue, the address, footage and nearby pavement help define the route and mobilization needs.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Graford bore near Powell Avenue?
For a quote near Powell Avenue, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. If the route reaches Texas State Highway 254, include the proposed crossing location so we can assess the right of way and bore profile.
Graford’s Leeray clay is the first cost consideration because sticky ground can require careful fluid control and staged reaming. The route under Texas State Highway 254 may add permit planning and cover requirements; marked utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill also affect the scope. Mobilization matters because the Yukon office is 228 road miles from Graford. High profile or emergency work can also require more planning.
Questions people ask about boring in Graford
Does Trinity Boring Solutions take Graford jobs in Palo Pinto County, and who staffs them?
Yes, we take directional boring work in Graford, and our own crews or crews from satellite yards run by vetted drilling contractor partners can handle the work. You deal with Trinity from the first call through the bore log, regardless of which crew is at the site. We plan for local routes such as Lee Avenue.
Can a line be bored beneath Pecan Branch in Graford?
A bore beneath Pecan Branch can be considered after the route, depth and ground conditions are reviewed. The stream runs 0.23 channel miles inside Graford, and a proposed water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The specific banks and access points shape the bore plan.
Who runs Graford’s public water system, and what is its source near Pecan Branch?
The City of Graford owns its public water system and uses purchased surface water, a utility detail we consider near Texas State Highway 254 crossings. Public records list 347 service connections serving 692 people. For a proposed connection near Main Street, the system owner and the line at the specific address should be confirmed before setting a bore route.
Which electric companies report service in Graford and Palo Pinto County, and who confirms conduit specs?
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Palo Pinto County. That list does not identify the provider for every Graford address. The line owner should confirm conduit specifications before we plan a bore near Texas State Highway 254.
Who controls Division Street in Graford, and does a utility job require cutting it?
Division Street is a city street because Graford is incorporated. A directional bore can place a line below the street without an open cut when the route, pits and ground conditions allow. We review the specific Division Street location and expose marked utilities before drilling near them.
How do Graford housing and buried lines near Main Street affect replacement bores?
Graford’s median housing year is 1983, according to American Community Survey 2019 to 2023 five year estimates, and 30 percent of homes were built before 1960. A replacement route near Main Street may meet older utilities, so we pothole marked lines to verify their depth and position before drilling.
How much notice does Texas811 need for a Graford bore near Lee Avenue, and what if marks change?
Request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. A ticket for work near Lee Avenue lasts 20 days; if the start moves more than 14 days past the original notice, submit a new request, and refresh worn or moved marks through Texas811 before work continues.
How far is Graford from the Yukon office, and does Mineral Wells change the job?
Graford is 228 road miles from our Yukon, Oklahoma main office, so we plan travel around the 4.9 hour drive. Mineral Wells is 12.6 miles southeast of Graford, but it does not change the route details or the distance from Yukon. Mobilization is one part of planning a bore near Powell Avenue.
What affects the price of a Graford bore beneath Texas State Highway 254?
For an FM 206 crossing, we set the price from the job scope and its specific boring requirements. Graford’s mapped Leeray clay can affect drilling time and fluid control, while a Texas State Highway 254 crossing brings cover and permit planning into the work. Other factors include bore length and size, utility exposure, pavement, creek crossings, pits, excavation time, backfill and mobilization from Yukon.
Where the Graford facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Graford
- U.S. Census Bureau, TIGER/Line 2024: Graford boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Graford
- U.S. Census Bureau, American Community Survey 2019 to 2023: Graford housing units and year built
- Macrostrat geologic map compilation: map units under Graford
- U.S. EPA Safe Drinking Water Information System: public water systems serving Graford
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Palo Pinto County
- U.S. Geological Survey, Elevation Point Query Service: Graford elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Graford
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Graford
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Graford, Texas
Type the address of your job in Graford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
