trinityboringsolutions.com

Loving Texas Directional Boring: Sagerton Loam, Brushy Creek, Highway 114

Quick Answer: Can you get a line under Brushy Creek without cutting the bank? We take directional boring, also called horizontal directional drilling (HDD), work in Loving, Texas, including creek crossings planned around Brushy Creek. The Yukon main office is 191 road miles away, so a job near Steadham Street has a longer mobilization to plan. Sagerton soil and clay below the surface can make the reamer sticky and grip the pipe. We adjust the drilling fluid and ream in stages for a bore near Sendero Circle.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Loving bores at a glance

  • Unincorporated community in Young County, Texas. Population 143 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 191 miles, about 3.9 hours of driving.
  • Ground: Sagerton soil is mapped on 25 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 58 percent of the area.
  • Highways inside the boundary: Texas State Highway 114 and Texas State Highway 16. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Brushy Creek.
  • Public water: Loving Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring on Steadham Street in Loving?

Trinity Boring Solutions takes directional boring work in Loving, an unincorporated community in Young County with a 2020 Census count of 143 people. Can you get a line under Steadham Street without cutting the road? We plan bores for water, sewer, gas, electric conduit and fiber routes along local streets and Texas State Highway 16.

Our main office is in Yukon, Oklahoma, and Loving work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982 and no utility strike in over 25 years. That record matters around Loving Water Supply Corporation lines and the electric lines reported in Young County.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Sagerton soil mean for boring in Loving?

Loving is mapped with Sagerton soil across 25 percent of the community, and the USDA soil survey lists Sagerton loam with 1 to 3 percent slopes. At about 40 inches below the surface, the mapped texture is clay across 38 percent of the area, while the average clay content at that depth is 40 percent. Only 3 percent is mapped as sandy at that depth. Those patterns suggest a bore can meet sticky clay that balls on a reamer and grips pipe, rather than loose sand that caves in.

USDA soil survey, inside the Loving mapped community boundaryWhat is mapped
Soil series mappedSagerton 25 percent, Shatruce 20 percent, Bluegrove 19 percent, Callahan 10 percent and Leeray 5 percent
Texture at the surfaceloam 40 percent, fine sandy loam 26 percent and gravelly fine sandy loam 20 percent
Texture about 40 inches downclay 38 percent, bedrock 26 percent and clay loam 25 percent
Engineering class about 40 inches downlean clay (CL) 63 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches58 percent of the area (0 percent hard rock, 58 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel87 percent of the area

The USDA soil survey maps bedrock within 40 inches across 56 percent of Loving and within 60 inches across 58 percent, so plans may meet weathered rock as well as soil. The map lists no seasonal water table within 60 inches, while flood prone soils cover 5 percent of the area, including potential concern near Brushy Creek. We account for high steel corrosion risk mapped across 87 percent when planning bores through Loving’s loam surface soil. The Paleozoic Markley Formation includes sandstone, shale and claystone, so the ground may slow at a soil to rock contact; the line owner should consider steel casing and tracer wire materials.

What does it take to bore Loving clay?

Loving’s mapped clay at about 40 inches can stick to the reamer and grip a pipe. Near Sagerton soil, we adjust fluid and reaming to keep the hole stable and finish the pull without leaving it open.

  1. Sagerton loam covers 25 percent of Loving, and clay is mapped at about 40 inches; we use fluid suited to sticky ground and stage the reaming.
  2. With 40 percent average clay content at that depth, the reamer can carry sticky material, so we watch the returns and pull pipe the day the hole is opened.
  3. The survey maps bedrock within 60 inches across 58 percent of Loving; weathered rock may slow the bit, especially where it meets soil.
  4. Near Brushy Creek, we plan the bore depth around the channel and check marked utilities by hydrovac before the drill approaches them.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Loving bore cross near Steadham Street?

Texas State Highway 114 and Texas State Highway 16 both run inside Loving’s mapped community boundary, with 1.5 roadway miles and 1.3 roadway miles mapped there, respectively. A bore beneath either highway needs planning for the state right of way and pavement. Steadham Street is the longest named street at 1.04 miles, followed by Sendero Circle at 0.49 miles and 3rd Street at 0.47 miles. These routes give a starting point for locating a bore path and checking the services it may meet.

CrossingTypeMapped extentWho has a say
Texas State Highway 114State highway1.5 roadway miles insideState highway office
Texas State Highway 16State highway1.3 roadway miles insideState highway office
Brushy CreekStream0.07 channel miles insideChecked for Corps of Engineers jurisdiction
Cameron CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Briar CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Plum CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Loving or within 1 mile outside the community boundary, so no local track crossing is identified in the records. Brushy Creek runs for 0.07 channel miles inside the community, but no street crossing of a named stream is mapped there. Cameron Creek, Briar Creek and Plum Creek are each 0.4 miles from the boundary. With Brushy Creek inside Loving, we check mapped water features on bore routes; no lakes or ponds are mapped within 1 mile. A proposed creek route still needs planning for the actual channel and site conditions.

Do I need a permit to bore in Loving or Young County?

Loving has no city government, so permits for its streets fall to Young County or the state, depending on who controls the route. For a bore in the right of way of Texas State Highway 114 or Texas State Highway 16, TxDOT’s Wichita Falls District reviews the utility permit. The line owner, not our crew, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that application. TxDOT requires boring or tunneling beneath existing highway pavement, with casing and a bore extending beneath all travel lanes on rural highways. A Brushy Creek crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near Loving Water Supply Corporation in Loving?

Loving Water Supply Corporation is the public water system, using groundwater wells and reporting 85 service connections for 200 people. Electric service reported in Young County includes Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative Service. Those county reports do not identify the provider at every Loving address, so we confirm the line owner before planning an electric conduit bore near Sendero Circle or another route.

Line ownerWhat it isSourceSize
Loving Water Supply CorporationPublic water systemGroundwater wells85 connections, 200 people served
Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative ServiceElectric utilities reporting service in Young CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Loving’s median housing year at 1939 or earlier; 56 percent of housing was built before 1960, and none was built in 2000 or later. Older service routes near 3rd Street may call for replacement bores, while a new connection needs its own path checked. We use hydrovac potholing to expose marked lines before drilling near them, including water and electric lines along the planned route.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Loving, Texas, including Graham?

Loving is in Young County, at an elevation of 1,277 feet, and covers 1.97 square miles within its mapped community boundary. ZIP code 76460 serves the area. Bryson is 10.0 miles southeast, Graham is 11.3 miles south, Newcastle is 13.5 miles west, Olney is 15.5 miles northwest and Jacksboro is 21.1 miles east. Graham is both the county seat and the nearest larger city. The Yukon, Oklahoma main office is 191 road miles away, a 3.9 hour drive, which affects crew mobilization for work near Texas State Highway 16.

Places near Loving

What would we bore near Brushy Creek in Loving?

  • Highway crossing: A bore beneath Texas State Highway 114 needs a path and profile suited to the state right of way and pavement.
  • Water service: A new connection near Loving Water Supply Corporation can follow a route checked against existing water lines and street access.
  • Fiber route: A fiber conduit along Steadham Street can be installed below the road surface, with marked utilities exposed before drilling near them.
  • Creek crossing: A proposed bore near Brushy Creek needs a planned channel depth and review for possible federal jurisdiction.
  • Street replacement: A sewer or water line near 3rd Street can use a bore to avoid opening the paved street along its route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Loving bore under Texas State Highway 114?

For a quote in Loving, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. For example, a route near Texas State Highway 114 needs a location and a clear line size, while a water service near Loving Water Supply Corporation needs its proposed length. A sketch or plans help us see the path and nearby crossings.

The price follows the work at the site, not just the length. Loving’s 191 road miles from Yukon affect mobilization, while Sagerton clay and possible weathered bedrock can change drilling time. We also account for the pipe or conduit size, utilities to expose, pavement on Texas State Highway 114, and any creek or drainage crossing near Brushy Creek. Pits, excavator time, sand backfill and emergency timing can also change the job scope.

Questions people ask about boring in Loving

Does Trinity Boring Solutions take directional boring jobs in Loving and Young County?

Yes, we take directional boring work in Loving and across Texas. Our main office is in Yukon, Oklahoma, and the work is staffed by our own crews or partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, including a job along Steadham Street.

Can you bore a line under Brushy Creek in Loving?

A bore under Brushy Creek can be planned without cutting the creek bank, subject to the site and route. The mapped channel runs 0.07 miles inside Loving, and creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. We also plan depth around the channel and locate utilities near the bore path.

Who runs Loving’s public water system in Young County, and where does its water come from?

Loving Water Supply Corporation runs the public water system, which uses groundwater wells. Public system records report 85 service connections and 200 people served. Before a water service bore near Sendero Circle, the proposed route still needs to be checked for marked lines and the specific connection location.

Which electric company serves my Loving address in Young County, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas-New Mexico Power and United Electric Cooperative Service report electric service in Young County, but that does not identify the provider at every Loving address. Confirm the line owner for the specific location and its conduit specifications before planning a bore near Texas State Highway 16.

Who is responsible for Loving streets, and can a bore avoid cutting 3rd Street?

Loving is an unincorporated community without a city government, so street authority rests with Young County or the state, depending on the road. A bore along 3rd Street can pass beneath the surface instead of open cutting it, subject to the route, utility locations and the responsible authority’s requirements.

How old are Loving homes and buried lines near Sendero Circle, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put Loving’s median housing year at 1939 or earlier, with 56 percent built before 1960. That does not establish the age of any buried line near Sendero Circle. For a replacement, we check the route and expose marked utilities before drilling close to them.

How much notice does Texas811 need for a bore on Steadham Street in Loving?

The person arranging excavation must contact Texas811 at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Steadham Street start slips more than 14 days past the original notice, a new request is needed. For bore planning along Texas State Highway 114 in Loving, we refresh worn or moved marks through Texas811 before work continues.

How far is Loving from the Yukon office, and does Graham change the job plan?

Loving is 191 road miles from our Yukon, Oklahoma main office, a 3.9 hour drive. Graham is 11.3 miles south and is the county seat, but the work location in Loving determines access and route planning. Distance can affect mobilization for a bore near Texas State Highway 114.

What affects the cost of directional boring in Loving under Texas State Highway 114?

The job details determine the price, including bore length, pipe or conduit size, ground, utility crossings and surface conditions. Sagerton clay or weathered bedrock can affect drilling time, while a Texas State Highway 114 route adds right of way and pavement planning. Distance from Yukon, creek or drainage crossings, pits and equipment needs also matter.

Where the Loving facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Loving

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Loving, Texas

Type the address of your job in Loving. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Loving

All counties: Texas county list.