trinityboringsolutions.com

Clarendon Texas Directional Boring: Miles Fine Sandy Loam, US 287, BNSF Railway

Quick Answer: US 287 is a major route for utility bores in Clarendon, where the crossing plan needs to account for highway pavement. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work beneath US 287 and other Clarendon routes. The Yukon, Oklahoma main office is 219 road miles away, with the BNSF Railway also shaping local crossing plans. USDA soil survey maps show Miles fine sandy loam across much of Clarendon. Sandy clay loam below the surface can hold the bore, while sandier layers need careful fluid and reaming control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Clarendon bores at a glance

  • County seat of Donley County, Texas. Population 1,843 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 219 miles, about 4.2 hours of driving.
  • Ground: Miles soil is mapped on 56 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 287, Texas State Highway 70, FM 2362 and FM 2162. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: City of Clarendon, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Clarendon’s 5th Street?

US 287 is the main route through Clarendon, and the Census Bureau Vintage 2024 estimate puts this Donley County seat at 1,843 people. We take directional boring work here for water, sewer, gas, electric conduit and fiber, including service runs along 5th Street or connections that need to pass beneath US 287. The line type and route shape the bore plan.

Our main office is in Yukon, Oklahoma, and Clarendon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that began in 1965 and has drilled directionally since 1982. We have had no utility strike in over 25 years, a record that matters when planning around the City of Clarendon’s water lines and Donley County electric service.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Clarendon’s Miles soil like to bore?

The USDA soil survey maps Miles soil across 56% of Clarendon, with Miles fine sandy loam map units covering much of that area. At about 40 inches below the surface, sandy clay loam is mapped under about 71% of the city. The mapped average clay content there is 27%. Near the surface, fine sandy loam is mapped across 84% of the area, while loamy fine sand accounts for 7%. We use Clarendon’s mapped sandy clay loam patterns to plan boring conditions, not treat them as test borings. The mix means the bore plan may need to shift between keeping a sandy hole open and controlling clay buildup on the reamer.

USDA soil survey, inside the Clarendon city limitsWhat is mapped
Soil series mappedMiles 56 percent, Altus 13 percent, Veal 11 percent, Mobeetie 5 percent and Springer 4 percent
Texture at the surfacefine sandy loam 84 percent, loamy fine sand 7 percent and clay loam 4 percent
Texture about 40 inches downsandy clay loam 71 percent, gravelly loam 11 percent and fine sandy loam 9 percent
Engineering class about 40 inches downclayey sand (SC) 70 percent, clayey gravel (GC) 11 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel5 percent of the area

Bedrock is not mapped in the top five feet of Clarendon, though that does not rule out rock below that depth. The geologic map shows Quaternary Dune Sand and Paleocene Cenozoic sedimentary rocks. Seasonal water table conditions are mapped in 4% of the area, and flood prone soils in 3%, so pits and fluid returns need attention if a route reaches those spots. High steel corrosion risk is mapped in 5%; the line owner selects any casing or tracer wire coating, while HDPE is not affected by that soil corrosion concern.

How should we plan drilling in Clarendon’s sandy clay loam soil for a bore?

Clarendon’s soil changes with depth, from fine sandy loam at the surface to sandy clay loam around 40 inches. We match fluid, reaming and pullback timing to the mapped ground and the route along streets such as 5th Street.

  1. On Clarendon’s fine sandy loam, we use drilling fluid to support the bore wall, then ream in stages so loose material is less likely to cave behind the tool.
  2. Where Miles sandy clay loam is mapped around 40 inches down, we adjust fluid and reamer passes to limit clay buildup before pulling the pipe.
  3. For a route near the 4% of Clarendon mapped with seasonal water table conditions, we plan compact pits and pumping for water that enters the excavation.
  4. Before drilling close to a marked utility on 5th Street, we hydrovac pothole to expose it, then track the drill head and log depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which Clarendon crossings at US 287 and BNSF Railway should we plan?

US 287, Texas State Highway 70, FM 2362 and FM 2162 have mapped roadway mileage inside Clarendon’s limits. A bore beneath an existing highway keeps the pavement uncut, and a rural highway crossing must extend beneath all travel lanes. Among the city’s named streets, 5th Street measures 2.93 miles, 3rd Street 2.57 miles and 4th Street 2.54 miles. Those routes can help define a service alignment, but the actual bore path and every marked utility still need to be checked before drilling.

CrossingTypeMapped extentWho has a say
US 287US highway2.5 roadway miles insideState highway office
Texas State Highway 70State highway2.1 roadway miles insideState highway office
FM 2362State highway0.8 roadway miles insideState highway office
FM 2162State highway1.2 roadway miles insideState highway office
BNSF RailwayRailroad2.05 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway has 2.05 track miles in Clarendon, and public mapping shows 3 street and rail crossings within the city. A route under the BNSF line needs the railroad’s crossing agreement. No streams are mapped inside the limits, though Clarendon has 2.36 miles of unnamed drainage. Within one mile of Clarendon, no lakes or ponds are mapped, which helps us assess nearby surface features before boring. If a planned route reaches a creek, bayou or other water crossing, its jurisdiction is checked during planning.

Who approves a Clarendon bore near BNSF Railway?

Clarendon is incorporated, so streets such as 4th Street belong to the city. A bore in the right of way of US 287, Texas State Highway 70, FM 2362 or FM 2162 needs a TxDOT utility permit. The line owner files through TxDOT’s online RULIS system, and the TxDOT Childress District reviews the request. We give the utility owner the bore plan and profile and work under the permit issued to that owner. TxDOT rules set cover depths, subject to district direction: electric and communication lines need 60 inches at highway crossings, water needs 60 inches, and pressurized sewer needs 60 inches. For a Clarendon crossing at BNSF Railway, we also need an agreement with the railroad before scheduling the bore.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Donley County in Clarendon?

We account for the City of Clarendon public water system’s 2,026 people, 940 service connections, and purchased surface water when planning underground work. That makes water service routes relevant when planning a new connection along 5th Street or a replacement bore. Utilities reporting electric service in Donley County are Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative. We confirm the line owner before planning an electric conduit bore, since the reported providers do not establish which one serves a specific Clarendon address.

Line ownerWhat it isSourceSize
City of ClarendonPublic water systemSurface water bought from another system940 connections, 2,026 people served
Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric CooperativeElectric utilities reporting service in Donley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Clarendon’s median housing year at 1959; 52% of housing was built before 1960, and 14% in 2000 or later. Older service lines along 3rd Street may need replacement, while newer construction can call for a new service route. Before the drill approaches any marked utility on either kind of job, we hydrovac pothole it to verify depth; surface paint shows position, not how deep the line sits.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Clarendon, Howardwick and nearby rural sites?

Clarendon is the Donley County seat, with 2.99 square miles of incorporated land and an elevation of 2,745 feet. Its ZIP code is 79226. Howardwick is 6.8 miles north, Lelia Lake is 7.5 miles east, and Hedley is 14.1 miles east. Pampa, the nearest larger city listed, is 42.4 miles north. Our Yukon, Oklahoma yard is 219 road miles away, a 4.2 hour drive. We take work in Clarendon, Howardwick and rural areas nearby, with mobilization planned around the route and job scope.

Places near Clarendon

What bores might come up on Clarendon’s 4th Street?

  • Highway crossing: A water or conduit bore beneath US 287 can keep the existing pavement intact, with the route planned for TxDOT cover requirements.
  • Water service: A new or replacement connection near 5th Street can tie into the City of Clarendon’s public water system after the route is checked.
  • Fiber drop: A fiber conduit along 4th Street can pass below driveways and pavement rather than opening a trench across each surface.
  • Rail crossing: A utility route beneath BNSF Railway needs the railroad’s crossing agreement, with its track and street crossing locations accounted for.
  • Drainage route: A bore near Clarendon’s 2.36 miles of unnamed drainage needs a path that avoids an open cut through the drainage area.
  • Conduit bore: Before an electric conduit route near 3rd Street is drilled, the line owner is confirmed and marked utilities along the path are exposed.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Clarendon bore near 6th Street?

Start with the address or a map pin, such as the 6th Street block where the bore is planned. For Clarendon work, tell us what goes in the ground, plus the pipe or conduit size and footage, so we can plan the bore. A sketch or plans help show whether the route approaches US 287, BNSF Railway or a marked utility. That lets us check access, crossings and the basic bore layout before pricing the work.

A short, direct service route near 6th Street is simpler to plan than a run that crosses US 287 or BNSF Railway. Price reflects footage, pipe or conduit size, Miles soil conditions, exposed utilities, pavement, drainage crossings, pits, excavator time and sand backfill. The Yukon yard is 219 road miles from Clarendon, so mobilization also depends on the scope and crew needs. When Clarendon work is high profile or an emergency, we plan for the added demands those conditions can bring.

Questions people ask about boring in Clarendon

Does Trinity Boring Solutions take directional boring work in Donley County, including Clarendon?

Yes. We take directional boring work in Clarendon and Donley County, and the job is handled through our Yukon main office. Our own crews or crews from partner drilling contractors we have vetted may be on site. You work with Trinity from the first call through the bore log, including a route near US 287.

Who is responsible for Clarendon’s 4th Street, and can a bore avoid cutting it?

Clarendon is incorporated, so 4th Street is a city street. Directional boring can pass beneath pavement without opening a trench across it. The route still needs utility locating and potholing, especially where 4th Street meets a marked line or another road.

Do older Clarendon homes near 3rd Street need replacement bores for buried lines?

They may. The American Community Survey 2019 to 2023 estimates place the median housing year at 1959, and 52% of homes were built before 1960. That age can mean an existing service needs replacement, but the line and its condition must be checked at the 3rd Street job site.

What ground does a bore pass through in Clarendon Miles soil?

The USDA soil survey maps Miles soil across 56% of Clarendon and sandy clay loam under about 71% of the mapped area at about 40 inches. Fine sandy loam is common near the surface. Those mapped patterns guide planning, but they do not replace site specific ground information along a route such as 5th Street.

Will a Clarendon bore hit rock below the surface?

The soil mapping does not show bedrock in the top five feet of Clarendon, but that does not rule out deeper rock. The geologic map shows Quaternary Dune Sand and Paleocene Cenozoic sedimentary rocks. A route near US 287 still needs to be planned for the ground actually encountered.

Who approves a Clarendon utility bore under US 287?

For work in the US 287 right of way, the utility owner applies for the TxDOT permit through RULIS, and the TxDOT Childress District reviews it. For Clarendon, we provide the bore plan and profile needed for the owner’s application. TxDOT cover requirements and the permit govern the crossing plan.

Can Trinity bore in Howardwick and rural places outside Clarendon?

Yes. We take work around Howardwick, which is 6.8 miles north of Clarendon, as well as rural sites outside the city limits. The address, route and access determine the plan, including whether a line needs to cross a road such as US 287.

How early should I call Texas811 for a Clarendon bore near 5th Street?

The line owner or excavator makes the Texas811 request and describes the planned bore path, such as a route along 5th Street. Texas requires notice at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If marks wear off or move, request refreshed marks before work continues.

What affects the cost of directional boring in Clarendon near US 287, and how should we plan the crossing?

The scope sets the price: footage, pipe size, Miles soil, pavement, exposed utilities, pits and any crossing of US 287 or BNSF Railway all matter. Drainage, sand backfill and excavator time can add work. Mobilization from the Yukon yard also reflects Clarendon’s 219 road miles from the office.

Where the Clarendon facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Clarendon

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Clarendon, Texas

Type the address of your job in Clarendon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Clarendon

All counties: Texas county list.