Lelia Lake Texas Directional Boring: Miles Fine Sandy Loam, US 287 and BNSF Railway
Quick Answer: Miles fine sandy loam is common around Lelia Lake; loose sand can cave behind the bit, so the hole needs support. We do directional boring, also called horizontal directional drilling (HDD), for routes beneath US 287 and around BNSF Railway. Our Yukon, Oklahoma main office is 227 road miles from 2nd Street, a distance that shapes equipment mobilization. At about 40 inches, sandy clay loam is the leading mapped texture, so staged reaming helps manage the changing mix.
Lelia Lake bores at a glance
- Unincorporated community in Donley County, Texas. Population 51 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 227 miles, about 4.4 hours of driving.
- Ground: Miles soil is mapped on 55 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 287, FM 1754 and FM 1755. State permit office: TxDOT Childress District.
- Railroad track inside the boundary: BNSF Railway, with 6 mapped street and rail crossings.
- Named streams inside the boundary: West Lelia Lake Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Lelia Lake near BNSF Railway?
Trinity Boring Solutions takes directional boring work in Lelia Lake, Donley County, where the 2020 Census counted 51 people. We can place water and sewer lines along routes serving 2nd Street, or carry gas, electric conduit and fiber beneath US 287 where a crossing is needed. We size the plan to the route, not the small population.
Our main office is in Yukon, Oklahoma, and Lelia Lake work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have gone more than 25 years without a utility strike; around 2nd Street, we treat marked electric and water lines as obstacles to verify before a new bore. Southwestern Electric Power reports service in Donley County, though the specific line owner must be confirmed. The family business began in 1965, with directional boring since 1982, experience we bring to routes near BNSF Railway.

What does Miles soil mean for boring in Lelia Lake?
The USDA soil survey maps Miles soil across 55% of Lelia Lake, with Altus at 17% and Veal at 11%. Surface texture is mostly fine sandy loam, mapped over 87% of the area; loamy fine sand covers 10%, and clay loam 3%. About 40 inches below the surface, sandy clay loam is mapped under 72% of the area. This mix can cut easily near the surface but may hold more clay deeper down. The survey maps patterns, not the conditions at a particular bore.
| USDA soil survey, inside the Lelia Lake mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Miles 55 percent, Altus 17 percent, Veal 11 percent, Mobeetie 7 percent and Guadalupe 5 percent |
| Texture at the surface | fine sandy loam 87 percent, loamy fine sand 10 percent and clay loam 3 percent |
| Texture about 40 inches down | sandy clay loam 72 percent, gravelly loam 11 percent and fine sandy loam 10 percent |
| Engineering class about 40 inches down | clayey sand (SC) 64 percent, lean clay (CL) 13 percent and clayey gravel (GC) 11 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
USDA soil mapping for Miles and Altus does not place bedrock in the top five feet of Lelia Lake, but that does not rule out deeper rock. Seasonal water table is not mapped within 60 inches. Flood prone soils cover 5% of the mapped area, so a route near West Lelia Lake Creek still needs channel specific planning. For Lelia Lake, we cannot use a mapped high steel corrosion risk rating when planning a bore. The Ogallala Formation, Pliocene in age, includes sand, silt, clay, gravel and caliche, so ground conditions can change along a bore.
How do crews handle sandy clay loam in Lelia Lake?
The USDA survey shows sandy clay loam below much of Lelia Lake, with fine sandy loam nearer the surface. We plan for changing soil, keep the bore stable and check the route against mapped streets and features.
- On routes through Miles soil, we ream in stages and keep the pipe ready, since loose sandy material can fall back into the bore behind the drill.
- Where sandy clay loam appears deeper in the Lelia Lake soil mapping, we adjust fluid use and reaming to avoid building pressure under a street surface.
- Before the drill nears any marked utility on a route near US 287, we hydrovac pothole it; surface paint shows position but not burial depth.
- We track the drill head from the surface and log depth and pitch as a bore advances near 2nd Street or West Lelia Lake Creek.

What does a bore have to cross in Lelia Lake near West Lelia Lake Creek?
US 287 runs 2.7 mapped roadway miles inside the Lelia Lake community boundary. FM 1754 accounts for 0.8 miles and FM 1755 for 1.0 mile. A bore near these roads needs a route and work plan that account for the roadway and its right of way. Among named streets, 2nd Street is longest at 3.09 miles, followed by 3rd Street at 1.13 miles and Front Street at 0.4 miles. Those street routes may also bring buried utilities into the bore path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 287 | US highway | 2.7 roadway miles inside | State highway office |
| FM 1754 | State highway | 0.8 roadway miles inside | State highway office |
| FM 1755 | State highway | 1 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.75 track miles inside | The railroad |
| West Lelia Lake Creek | Stream | 0.62 channel miles inside | Checked for Corps of Engineers jurisdiction |
| East Lelia Lake Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Lelia Lake Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Lelia Lake | Lake or pond | 24 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Cattail Lake | Lake or pond | 18 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Taylor Lakes | Lake or pond | 15 acres, nearby | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 1.75 track miles within the mapped community, and public mapping shows 6 street and rail crossings. A route crossing the tracks needs the railroad owner’s agreement. West Lelia Lake Creek runs 0.62 channel miles inside the boundary, and one mapped street crossing of a named stream is present. Lakes within one mile include Lelia Lake, a 24 acre lake outside the boundary. A creek or lake crossing is checked for federal jurisdiction during planning.
Who approves a bore in Lelia Lake and Donley County?
Lelia Lake has no city government, so streets are under county or state authority rather than a town street department. A bore in the right of way of US 287, FM 1754 or FM 1755 needs a TxDOT utility permit. The TxDOT Childress District reviews it, and the utility owner files through RULIS; we prepare the bore plan and profile and work under the owner’s permit. TxDOT requires highway crossings to be bored or tunneled, encased and extended beneath rural highway travel lanes. A BNSF Railway crossing needs an agreement from the railroad owner, while West Lelia Lake Creek is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already in the ground in Donley County near Lelia Lake?
We confirm the water provider for a specific Lelia Lake address with the county or local water district before we plan a bore. Public drinking water records do not match a provider to this place. Electric service reported in Donley County includes Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative. A conduit bore near 2nd Street needs the line owner confirmed for that route; the countywide list does not identify which provider serves each address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative | Electric utilities reporting service in Donley County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as Lelia Lake, so the age of buried lines along Front Street cannot be inferred from a reliable local housing survey. Long service runs and routes along US 287 may call for replacement bores as well as new connections. Donley County averages 22.0 inches of precipitation a year, with May the wettest month at 3.2 inches. For a planned crossing near Front Street, we daylight marked lines with hydrovac before drilling near them.

What is near Lelia Lake and Childress?
Lelia Lake is an unincorporated community in Donley County, covering 0.89 square miles at an elevation of 2,583 feet. For Lelia Lake, ZIP codes are 79226 and 79240; we still need an exact location for underground planning. Hedley is 6.5 miles east, Clarendon is 7.5 miles west, Howardwick is 12.2 miles northwest, Lakeview is 16.3 miles south and Memphis is 17.6 miles southeast. Clarendon is the county seat; Childress is the nearest larger city, 42.4 miles southeast. The Yukon yard is 227 road miles away, a 4.4 hour drive that affects mobilization for work near US 287.
Places near Lelia Lake
- Directional boring in Hedley: 6.5 miles east
- Directional boring in Clarendon: 7.5 miles west
- Directional boring in Howardwick: 12.2 miles northwest
- Directional boring in Lakeview: 16.3 miles south
- Directional boring in Memphis: 17.6 miles southeast
- Directional boring in Childress: 42.4 miles southeast
What would we bore near 2nd Street in Lelia Lake?
- Highway crossing: A route beneath US 287 needs a bore plan that accounts for the highway right of way and its travel lanes.
- Water service: A service route toward 2nd Street can use a bore to avoid cutting the street surface.
- Fiber conduit: A run near Front Street needs the conduit path checked against marked lines before drilling starts.
- Creek crossing: A proposed route beneath West Lelia Lake Creek needs channel planning and a jurisdiction check.
- Rail crossing: A crossing at BNSF Railway needs an agreement from the track owner before the route is set.
- Electric conduit: Near FM 1754, the electric line owner must be confirmed before planning a conduit bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Denver Street in Lelia Lake?
A map pin matters near Denver Street because the exact route determines which street, buried lines or nearby drainage features a bore may meet. For a Lelia Lake bore, send us the address or pin, what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans showing the route from Denver Street to its connection point help us scope it.
The 227 road miles from Yukon shape mobilization for a Lelia Lake job. Price also reflects the length and size of the line, the mix of Miles soil and any rock, and how many utilities must be crossed and exposed. A route near US 287 or BNSF Railway can involve added crossing requirements. West Lelia Lake Creek, pavement, pits, excavator time and sand backfill also affect the work, as can emergency timing or a high profile location.
Questions people ask about boring in Lelia Lake
Does Trinity take directional boring jobs in Donley County near Lelia Lake, and who staffs them?
Yes. We take directional boring work in Lelia Lake, Donley County, and handle the project from the first call through the bore log. Our own crews or crews from satellite yards operated by partner drilling contractors we have vetted can perform the work. The specific crew depends on the project schedule and location near features such as US 287.
Who controls Front Street in Lelia Lake, and does a bore require cutting it?
Lelia Lake is unincorporated and has no city government, so Front Street is not managed by a town street department. A directional bore can pass beneath the street without opening a trench across its surface. The route still needs to account for marked utilities and any right of way requirements that apply to the specific crossing.
How old are homes and buried lines near 3rd Street in Lelia Lake?
Reliable housing age figures are not published for Lelia Lake, so they do not establish the age of lines near 3rd Street. Replacement bores and new service bores are both possible project types. Before drilling near an existing utility, we expose the marked line and verify its location and depth rather than relying on the age of nearby housing.
What ground should a bore expect in Lelia Lake around Miles soil?
The USDA soil survey maps Miles soil over 55% of Lelia Lake. About 40 inches down, sandy clay loam is mapped under 72% of the area, while the surface is mostly fine sandy loam. The sandy material can cave behind the bit, and the deeper clay mix calls for staged reaming and attention to drilling fluid.
Will we encounter rock during directional boring in Lelia Lake, and how could that affect the bore plan?
The soil mapping does not place bedrock in the top five feet of Lelia Lake, but deeper rock is not ruled out. The local geologic map shows the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and caliche. A specific route near West Lelia Lake Creek still needs planning for changing ground conditions.
Who should we contact to confirm approval for a bore under US 287 in Lelia Lake before planning the crossing?
A bore in the US 287 right of way needs a TxDOT utility permit reviewed by the TxDOT Childress District. The utility owner files in RULIS, while we provide the bore plan and profile and work under that owner’s permit. A separate crossing of BNSF Railway would require an agreement from the railroad owner.
What bore sizes and lengths can Trinity handle for a job near Denver Street in Lelia Lake?
We handle lines from 3/4 inch service size through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Denver Street is sized to the planned route, ground and utility crossings. We review the pipe or conduit dimensions and footage before selecting equipment and setting the bore plan.
How much notice does Texas811 need before boring near 2nd Street in Lelia Lake?
For a 2nd Street excavation, Texas811 must receive the locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the start. If work slips more than 14 days past the original notice, a new request is needed; worn or moved marks must be refreshed before work continues.
What affects the cost of directional boring near US 287 in Lelia Lake?
The scope sets the price. For a Lelia Lake route, factors include footage, pipe or conduit size, Miles soil and any rock, utilities to expose, pavement, pits and equipment time. Crossing US 287, BNSF Railway or West Lelia Lake Creek can add planning needs. The 227 road miles from Yukon also shape how we schedule mobilization for Lelia Lake boring work.
Where the Lelia Lake facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lelia Lake
- U.S. Census Bureau, TIGER/Line 2024: Lelia Lake boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Lelia Lake population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lelia Lake housing units and year built
- Macrostrat geologic map compilation: map units under Lelia Lake
- U.S. Department of Transportation, North American Rail Network: track owners in Donley County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Donley County
- U.S. Geological Survey, Elevation Point Query Service: Lelia Lake elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lelia Lake
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lelia Lake
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lelia Lake, Texas
Type the address of your job in Lelia Lake. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lelia Lake
All counties: Texas county list.
