Cooper Texas Directional Boring: Wilson Silt Loam, Texas State Highway 24, Cannon Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Cooper, Texas for lines that need to pass beneath Texas State Highway 24. Cooper is 259 road miles from our Yukon, Oklahoma main office, and our own crews or vetted partner contractor satellite yards staff work near Dallas Avenue. Wilson silt loam covers 59 percent of the mapped area, so sticky clay can grip a reamer and pipe. Cannon Creek is a local crossing to consider when laying out a route.
Cooper bores at a glance
- County seat of Delta County, Texas. Population 2,082 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 259 miles, about 5 hours of driving.
- Ground: Wilson soil is mapped on 59 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 16 percent of the area.
- Highways inside the boundary: Texas State Highway 24, Texas State Highway 154, FM 1528, Texas State Highway 24 Business and FM 64. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cannon Creek.
- Public water: City of Cooper, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Cooper and Delta County?
We take directional boring work in Cooper, the Delta County seat, where the Census Bureau Vintage 2024 estimate puts the population at 2,082. For planned work near Texas State Highway 24, we install water, sewer, gas, electric conduit, and fiber lines with a crossing specific bore plan. On a route near Dallas Avenue or 1st Street, we can plan the bore around the service connection, street and marked utilities.
Our main office is in Yukon, Oklahoma, and Cooper work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. That shows the range; a job near 3rd Street is planned around its actual line size, length and crossings. When planning a Cooper project, we account for 259 road miles from our Yukon main office; our family business began in 1965 and has done directional boring since 1982.

What is Cooper ground like to bore through Wilson soil?
The USDA soil survey maps Wilson soil across 59 percent of Cooper. Crockett accounts for 12 percent, Leson for 10 percent, Houston Black for 6 percent and Heiden for 6 percent. Surface texture is mapped as silt loam across 60 percent and clay across 26 percent. At about 40 inches below the surface, clay is mapped across 98 percent of the area, with an average clay content of 48 percent. Wilson soil patterns on the Cooper map are mapped conditions, not test borings; we use them as context before selecting a bore depth. Along a Dallas Avenue route, the sticky clay can ball on a reamer and grip the pipe.
| USDA soil survey, inside the Cooper city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 59 percent, Crockett 12 percent, Leson 10 percent, Houston Black 6 percent and Heiden 6 percent |
| Texture at the surface | silt loam 60 percent, clay 26 percent and loam 12 percent |
| Texture about 40 inches down | clay 98 percent |
| Engineering class about 40 inches down | fat clay (CH) 98 percent |
| Average clay content about 40 inches down | 48 percent |
| Bedrock mapped within 60 inches | 16 percent of the area (0 percent hard rock, 16 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 99 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches in 16 percent of Cooper, with typical bedrock depth at 51 inches; hard bedrock is not mapped within 60 inches. Seasonal water table and flood prone soils each cover 1 percent, so pits and a route near Cannon Creek still need attention to wet ground. High steel corrosion risk is mapped across 99 percent, a concern for uncoated steel casing or tracer wire; the line owner chooses any coating. The geologic map names Marlbrook Marl, a Late Cretaceous unit of clay and limestone, so conditions can change below the mapped soils.
How do we drill Cooper clay without opening the street?
On a Cooper route through Wilson silt loam and clay, we plan the fluid and reaming around sticky ground. The layout also has to account for the street, nearby lines and any pavement.
- In Cooper’s mapped heavy clay, we use thinner drilling fluid and polymer, then ream in stages so sticky soil is less likely to ball on the tooling.
- Where clay makes up 98 percent of the mapped soil at about 40 inches, we watch fluid returns to avoid lifting pavement near Dallas Avenue.
- We expose each marked utility on a route near 1st Street with hydrovac before the drill approaches; paint marks position, not depth.
- As a bore near Cannon Creek advances, we track the drill head from the surface and log its depth and pitch.

Where does a line have to go under Cannon Creek in Cooper?
Texas State Highway 24 and Texas State Highway 154 each have 1.6 mapped roadway miles inside Cooper. FM 1528 has 1.0 mile, Texas State Highway 24 Business has 0.7 mile and FM 64 has 0.5 mile. A line under one of these state roads needs a bore plan that fits the right of way and pavement. The longest named streets are 1st Street at 2.36 miles, 3rd Street at 1.67 miles and Dallas Avenue at 1.46 miles. Their pavement can stay intact when the route is bored beneath it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 24 | State highway | 1.6 roadway miles inside | State highway office |
| Texas State Highway 154 | State highway | 1.6 roadway miles inside | State highway office |
| FM 1528 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 24 Business | State highway | 0.7 roadway miles inside | State highway office |
| FM 64 | State highway | 0.5 roadway miles inside | State highway office |
| Cannon Creek | Stream | 0.09 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Big Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Doctors Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| East Fork Big Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Cooper or within one mile outside its limits, and no street and rail crossings are mapped in the city. Cannon Creek runs 0.09 channel miles inside Cooper; no street crossings of named streams are mapped. Big Creek is 0.2 miles from the city limits, Doctors Creek is 0.7 miles away and East Fork Big Creek is 0.8 miles away. A creek route needs a depth plan, and its jurisdiction is checked during planning. We plan from Cooper maps showing no lakes or ponds within one mile, while treating Cannon Creek inside city limits as a separate crossing consideration.
Who approves a Cooper bore under Texas State Highway 24?
A crossing beneath Texas State Highway 24 needs 60 inches of cover below the lowest point of the crossed grade for electric and communication lines, and 60 inches for water lines. Pressurized sewer lines also need 60 inches at crossings. The TxDOT Paris District reviews the right of way permit. The utility owner, not our contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for the utility’s application. TxDOT rules call for boring or tunneling beneath existing highway pavement, with casing at crossings. On rural highways, the bore extends under all travel lanes. A different depth may be set in the permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns utilities in Cooper and the City of Cooper?
The City of Cooper public water system uses surface water and lists 2,648 service connections serving a population of 2,135. That is useful context for a water service or replacement route near Dallas Avenue, but the line location still needs to be confirmed. Oncor Electric Delivery Company, Farmers Electric Cooperative and Lamar County Electric Cooperative Association report electric service in Delta County. We confirm the electric line owner before planning a conduit bore, then use hydrovac potholing to expose marked lines before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Cooper | Public water system | Surface water | 2,648 connections, 2,135 people served |
| Oncor Electric Delivery Company, Farmers Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Delta County | EIA Form 861 | Confirm the line owner by address |
Cooper’s median housing year is 1970 in the American Community Survey 2019 to 2023 five year estimates; we account for that context when planning underground routes. The survey shows 38 percent of homes built before 1960, 53 percent from 1960 to 1999 and 9 percent in 2000 or later. That age mix can mean a job near 3rd Street is replacing an older service or adding a new one; the records do not date each buried line. We expose marked utilities with hydrovac before drilling near a crossing, since surface paint shows position, not depth.

Do you cover Cooper and nearby Pecan Gap?
Cooper is in Delta County, covers 1.46 square miles and sits at an elevation of 485 feet. Its ZIP code is 75432, and it is the county seat. Pecan Gap is 10.4 miles northwest; Tira is 9.4 miles east, Roxton is 12.2 miles north, Commerce is 15.0 miles southwest and Ladonia is 15.4 miles west. Commerce is the nearest larger city. From our Yukon, Oklahoma main office, Cooper is 259 road miles and a 5.0 hour drive, which factors into mobilization for work near Texas State Highway 24 or a local street.
Places near Cooper
- Directional boring in Tira: 9.4 miles east
- Directional boring in Pecan Gap: 10.4 miles northwest
- Directional boring in Roxton: 12.2 miles north
- Directional boring in Commerce: 15 miles southwest
- Directional boring in Ladonia: 15.4 miles west
What kinds of bores come up on Cooper’s 1st Street?
- Highway crossing: A bore beneath Texas State Highway 24 is planned for the required cover and to keep existing pavement uncut.
- Water service: A replacement connection near Dallas Avenue can be routed underground to avoid opening the street surface.
- Fiber conduit: A conduit run along 1st Street needs marked utilities exposed before the drill approaches the route.
- Creek crossing: A route beneath Cannon Creek needs a depth plan and a jurisdiction check during planning.
- Street bore: Work near 3rd Street can pass beneath pavement, with pits set in the dirt on each side.
- Water system work: A service tied to the City of Cooper system needs its line location checked before the bore is laid out.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Cooper bore near 10th Street?
Start with a map pin or address, especially if the route is near 10th Street or Cannon Creek; the exact spot shows which crossings need planning. Near FM 1528, tell us what will go in the ground, the pipe or conduit size, and the footage so we can plan the bore. A sketch or plans help us see the route, pavement and access before we scope the work.
A short route in Wilson silt loam with no pavement or marked utilities to cross is simpler to plan than a long bore beneath Texas State Highway 24. Length, pipe size, soil and rock, utilities to expose, pavement, creek crossings, pits and excavator time all affect the scope. Cannon Creek can add crossing review and planning. The 259 road miles from Yukon also affect mobilization, while high profile or emergency work can call for more planning.
Questions people ask about boring in Cooper
Does Trinity take directional boring jobs in Cooper and Delta County, and who staffs them?
Yes. We take jobs in Cooper and staff them with our own crews or crews at satellite yards run by drilling contractors we have vetted. For a Delta County bore, we coordinate with Trinity through the bore log, regardless of which crew is on site. Our Yukon, Oklahoma main office is 259 road miles from Cooper.
Who is responsible for Dallas Avenue in Cooper, and can a bore avoid cutting it?
Dallas Avenue is a city street because Cooper is incorporated. A directional bore can pass below the pavement, with entry and exit pits placed in dirt where the route allows. The exact route and marked utilities still need to be checked before work is planned.
How does Cooper housing near 3rd Street affect a replacement bore?
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Cooper at 1970, with 38 percent of homes built before 1960. That does not date the buried lines, but it makes checking the existing service route important when a project near 3rd Street replaces an older connection.
Does Wilson soil in Cooper corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 99 percent of Cooper, including areas mapped as Wilson soil. For a planned crossing near 4th Street, we leave any coating for steel casing or tracer wire to the line owner. HDPE is not affected by this soil corrosion concern, but the right material depends on the line and its specifications.
What ground will a Cooper bore through in Wilson soil?
Wilson soil covers 59 percent of Cooper in the USDA soil survey, and silt loam is the leading surface texture at 60 percent. At about 40 inches, clay is mapped across 98 percent of the area. That sticky clay can build up on tooling and grip the pipe, so staged reaming and fluid control matter.
Is rock mapped near the surface in Cooper, and how much is hard or weathered?
The USDA soil survey maps weathered bedrock within 60 inches across 16 percent of Cooper, with typical bedrock depth at 51 inches. Hard bedrock is not mapped within 60 inches, and bedrock is not mapped within 40 inches. The Marlbrook Marl geologic unit includes clay and limestone, so a soil map does not rule out rock below the mapped depth.
Can I reach Trinity after hours about an urgent bore near Dallas Avenue in Cooper?
Yes. Someone answers the Trinity phone at (405) 409-7423 24 hours a day for an urgent job near Dallas Avenue or elsewhere in Cooper. The details that help us assess the call are the location, what line is involved and what needs to be done.
How early should I request utility marks for a bore on 1st Street in Cooper?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. For a bore along 1st Street, marks that wear off or move must be refreshed through Texas811 before work continues. If a Texas State Highway 154 notice slips more than 14 days past the original notice, we make a new request before proceeding.
What affects the cost of a bore under Texas State Highway 24 in Cooper?
The scope sets the price. A bore beneath Texas State Highway 24 needs highway cover and permit planning; length, pipe size, soil and rock, utilities to expose, pavement, pits and creek crossings also matter. Cooper is 259 road miles from our Yukon main office, so mobilization is part of planning. For high profile or emergency work near Texas State Highway 24 Business, we plan for added demands and handle permits through the TxDOT Paris District.
Where the Cooper facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cooper
- U.S. Census Bureau, TIGER/Line 2024: Cooper boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Cooper
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cooper housing units and year built
- Macrostrat geologic map compilation: map units under Cooper
- U.S. EPA Safe Drinking Water Information System: public water systems serving Cooper
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Delta County
- U.S. Geological Survey, Elevation Point Query Service: Cooper elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cooper
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cooper
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cooper, Texas
Type the address of your job in Cooper. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cooper
All counties: Texas county list.
